Tender For Periodical Services And Certain Repairs At Jco/Or Md Accn At Mil Stn Gaya; 1 M & L for applying one coat of cement base paint as per manufacturer instruction on existing old treatedsurfaces after preparation of surfacesincluding brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots all as specified. 2 M & L for two coat of cement base paint over a coat of primer as per manufacturer instructionincluding removal of existing treatment on existing old surfaces of walls all as specified. 3 M & L for Preparation of old decorated surfaces of walls and applying one coat of distempering with oil bound distemper as per manufacturer instructions white or tinted complete all as specified and directed. 4 M & L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with oil bound distemper as per manufacturer instructions white or tinted complete all as specified and directed. 5 M & L for Preparation of old decorated surfaces of and applying two coats of distempering with oil bound distemper as per manufacturer instructions white or tinted all as specified and directed. 6 M&LOne coat of exterior weather coat paint with rollerwhite or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified & directed. 7 M & L for applying a thin layer of 0.50mm thick Birla white putty/JK white wall care putty on wall surfaces including removal of existing treatment and making the surface uniform and smooth complete all as specified and directed. 8 M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. 9 M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. 10 Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism)having RPM between 600-1500, sandingpaper of 60/80 Grit having dia of 7/9to make thesurface free from dust, loose paintetc. by skilled labour complete all as specified and as directed by Engineer-in-Charge. 11 Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrappingto prepare the surface even and smooth complete.Step1 : Mix the puttypowder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer withmin 1400 W power havinng mixer rod of industrial stell grade 45 with themixingcapacity of min 2.5 kg putty per minute) or equivalentStep 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application ofAsian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalanthaving a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar havingmaximum tipsize 0.039Step 3: Allow 6-8 hrs time to dry the putty surface.Step 4:Apply second coat of the prepared mixer manuallytomake to smooth to make the finish even.Step 5:Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge. 12 Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01or equivalent (having mechanical vacuum mechanism)having RPM between 600-1500, sanndingpaper of 180 Grit having dia of 7/9to make thesurface free from dust etc. by skilled labour complete all as specified and directed. 13 Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machineofpaint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs todry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge. 14 Providingand applying two coats of cement based paint @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machineof paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minutehaving a pressureof3300PSI.Allow 6-8 hrs todry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge. 15 Providingand applying two coats of exterior weather coat paint @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machineof paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minutehaving a pressureof3300PSI.Allow 6-8 hrs todry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge. 16 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. 17 M & L for rendering 10mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete. 18 M & L for applying a thin layer of 0.50mm thick white wall care putty over newly plastered surface toprepare the surface even and smooth complete all as specified and directed. 19 M&L for rendering 10mmthick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. 20 M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete. 21 Supply Only integral water proofing compound 22 M&L for repairing of R.C.C projections, chajjias, roofs, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation, Scarpping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and finished with cement and sand motar (1:3) using coarse sand and work in patchesincluding necessary form work and applyingtwo coats of finishes to match with the existing surfaces in at any height complete all as specified and directed 23 S & F thin flexible galvanised steel wire with hexagonal gaps chicken wire mesh about half to one inch dia incl fixing with screws, nails etc complete. 24 M & L for preparation of new plastered/decorated wall surfaces and applying two coats of distempering with oil bound distemperas per manufacturer instruction white or tinted complete all as specified and directed. 25 M & L for preparation of new plastered/decoarated wall surfaces and applying two coats of water proof cement base paint complete all as specified and directed. 26 M&L for two coats of oil bound distemper on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed. 27 M&L for writing letters and figures (Block romon italic or indian) n exc 30 cm high complete one set at one place (min letters 03 Nos & max letters 12 Nos) with synthetic enamel paint complete all as specified and directed. 28 Taking down chowkhats or frames not exc 1.5 Sqm (without taking shutters from the frame). 29 Taking down chowkhats or frames exc 1.5 Sqm but exc 4.0 Sqm (without taking shutters from the frame). 30 S&Faluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. 31 S&Fany colour, aluminum window and ventilator shutters, powder coated sliding/side hung type with sash bars, aluminium section weighing not less than 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 32 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. 33 S&F Solid PVC factory madeDoor shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC C channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling ofplain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing. 34 S & F 100mmButthinges, heavy weight, cold rolled mild steel, and fixed complete. 35 S & F 200 mm long aluminium anodised barrel tower boltof extruded section complete. 36 S & F aluminium handles, cast type, D shape anodised of size 150mm. 37 S&F galvanised stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. 38 Hacking out old broken glass (any the size quality or description) from wooden and steel frames glazed all as specified and directed 39 S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or rubber beading in squares of any size complete all as specified and directed 40 S&F 4mm thickfigured glass pin head type and glazing with oil putty or wooden beads or rubber beading in squares n exc 0.50 Sqm each pane complete all as specified and directed. 41 Dismantling structural steel work including doors, gates, grills but excluding framed truss etc complete. 42 S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 43 S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. 44 S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted 45 S&F in repair 600mm x450mm looking mirror 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer complete all as directed 46 S&F 4mm thick superior quality shelves (corner), made of transparenttoughened glass, size 30x30cm complete all as specified and as directed. 47 S&F 4mm thick superior qualitystraight shelve , made of transparent toughened glass, size 60cm longcomplete all as specified and as directed. 48 Removing of plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding, any type, any location/height (i.e roof parapet walls near pipes etc) and applying acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 200 mm) complete all as specified and directed. 49 Taking down existing door shutter with frame area exceeding 1 Sqm and n exc 2.5 Sqm and re-fixing in same opening after repair/replace the defective jointing cleats/screws all as per specified and directed by Engr-in-Charge. 50 S&F in repair Aluminium anodised, barrel tower bolts 150 mm long, complete all as specified 51 S&F in repair 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. 52 S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified 53 S & Fin repair 100 mmMS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified. 54 S & Fin repair 75 mmMS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified. 55 Cleaning of floor trap and applying of cement around the floor trap with sealantcompound for arrestingthe seepage all as specified and directed 56 Taking down shutter refixing aftereasing, adjusting areaexc 1 Sqm but not exc 2 sqm each complete all asspecified. 57 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 58 M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete. 59 M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:6 complete. 60 All as per ser item No 59 above but as in vertical surfacesin skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete. 61 M & L for coloured glazed ceramic tiles in vertical surface 7mm thickexc 0.06 Sqm but not exc. 0.20 Sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4as backing for tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring/wall tiles) 62 Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing as site requirement complete all as directed 63 S&F in repair, viterous china squatting pan (Orissa pattern) long pan size 580x440mm, white with intergral footrest including P or S trap including provision of lime concrete beddingcomplete all as specified. 64 S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm. complete all as specified 65 S & F 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified and ISI Marked 66 Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed 67 S & F of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. 68 S&F as in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. 69 S &F as in repair chromium plated shower rose 125 mm dia with 600mm CP shower arm fancy type fixed to 15mm bore pipeall as specified and directed. 70 S & F in repair 15mm stop valves/angle valves cast copper alloy chromium plated fancy type concealedtype/open type screwed down high pressure with crutch or butterfly handle screwed down, high pressure with crutch screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed 71 S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. 72 S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed 73 Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.
