Tender For Purchase Of Items For Open Gym - AIR WALKER,PIPE MAKE:- JINDAL / TATA,COMBINATION EQUIPMENT MADE UP OF “B” CLASS GI PIPE OF DIFFERENT NB. NB STANDS FOR NOMINAL BORE SIZE I.E. INTERNAL DIAMETER OF PIPE IN MILLIMETERS.100MM NB:- MAIN FRAME. 80MM NB:- STANDING TWISTER SUPPORT. 32MM NB:- AIR WALKER PEDAL, LEG PRESS SEAT, STANDING TWISTER BASE, SUPPORT. 25MM NB:- LEG PRESS FOOTREST SUPPORT, AIR WALKER HANDLE, STANDING TWISTER HANDLE.C CHANNEL OF 38 X 73 X 4.5MM:- BOTTOM SUPPORT FRAME.MS PLATE OF 8MM:- LEG PRESS PROFILE, AIR WALKER PEDAL L-BEND. Φ60MM SEAMLESS PIPE:- BUSHES. Φ70MM SEAMLESS PIPE:- BUSHES. MS SHEET OF SIZE 330 X 300 X 1.8MM:- SEAT AND BACKREST. MS PLATE OF 245 X 113 X 2.8MM:- FOOTREST SUPPORT. MS ROUND PLATE OF Φ298 X 9MM:- STANDING TWISTER PLATE. HDPE / PPCP PLASTIC:- CLOSING CAPS, LEG PRESS FOOTREST. MS BRIGHT MATERIAL:- PINS MADE OF Φ 35MM, Φ 25MM. BEARINGS:- PERMANENT LUBRICATED BEARINGS “6007”, “6205” OF REPUTED BRAND ARE USED. BEARINGS END CAP:- MADE UP FROM NYLON MATERIAL. STOPPER:- STOPPER (BUSHES) USED ARE MADE FROM POLY URETHIN MATERIAL OF Φ50MM. NUT & BOLTS:- HIGH TENSILE STEEL WITH GALVANISED NUT & BOLTS ARE USED. CIRCLIPS:- THE CIRCLIPS ARE USED FOR LOCKING IS MADE UP OF A34, A24 & A16. POWDER COATING:- THE POWDER COATING DONE WITH PURE POLYSTER POWDER OF ACKZONOBLE OR BERGER WITH 60 TO 70 MICRON THICKNESS. 3 CHEST PRESS, LENGTH:- 1550MM, WIDTH:- 710MM, HEIGHT:- 2150MM, SAFE AREA:- 3.0 MTR X 1.7 MTR, CHEST PRESS EQUIPMENT MADE UP OF “B” CLASS GI PIPE OF DIFFERENT NB. NB STANDS FOR NOMINAL BORE SIZE I.E.INTERNAL DIAMETER OF PIPE IN MILLIMETERS. 100MM NB:- CENTRE PIPE. 80MM NB:- FOUNDATION MAIN PIPE. 32MM NB:- HANDLE FRAME DULY BEND, SEAT FRAME DULY BEND, SUPPORT. 25MM NB:- CONNECTING LINKS, HANDLE. MS ANGLE 23 X 23 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS PIPE 19 X 38 X 1.8MM:- FOUNDATION SUPPORT FRAME. Φ50MM SEAMLESS PIPE:- BUSHES. Φ60MM SEAMLESS PIPE:- BUSHES. MS SHEET OF SIZE 330 X 300 X 1.8MM:- SEAT AND BACKREST. HDPE / PPCP PLASTIC:- CLOSING CAPS, BASE COVER. MS BRIGHT MATERIAL:- PINS MADE OF DIA.25MM & DIA.17MM. BEARINGS:- PERMANENT LUBRICATED BEARINGS “6205” & “6203” OF REPUTED BRAND ARE USED. BEARINGS END CAP:- MADE UP FROM NYLON MATERIAL. NUT & BOLTS:- HIGH TENSILE STEEL WITH GALVANIZED NUT & BOLTS ARE USED. CIRCLIPS:- THE CIRCLIPS ARE USED FOR LOCKING IS MADE UP OF A24 & A16. HANDLE GRIPS:- HANDLE GRIPS ARE MADE UP OF HIGH QUALITY RUBBER MATERIAL. POWDER COATING:- THE POWDER COATING DONE WITH PURE POLYSTER POWDER OF ACKZONOBLE OR BERGER WITH 60 TO 70 MICRON THICKNESS. 4 DOUBLE STANDING TWISTER,LENGTH:- 1800MM, WIDTH:- 540MM, HEIGHT:- 1430MM, SAFE AREA:- 3.0 MTR X 1.0 MTR, SEATING & STANDING TWISTER EQUIPMENT MADE UP OF “B” CLASS GI PIPE OF DIFFERENT NB.NB STANDS FOR NOMINAL BORE SIZE I.E. INTERNAL DIAMETER OF PIPE IN MILLIMETERS. 100MM NB:- CENTRE PIPE. 80MM NB:- STANDING TWISTER PLATE SUPPORT, FOUNDATION MAIN PIPE. 50MM NB:- SEATING TWISTER PLATE SUPPORT. 32MM NB:- BOTTOM FRAME, SUPPORT. 25MM NB:- HANDLE FRAME RING, FOOT RESTING FRAME. DIA. 125MM OD WITH 5MM THICKNESS:- HANDLE SLEEVE PIPE. MS ANGLE 23 X 23 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS PIPE 19 X 38 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS ROUND PLATE OF 298 X 9MM:- TWISTER PLATE. Φ70MM SEAMLESS PIPE:- BUSHES. MS FLAT 38 X 9MM:- BOTTOM FRAME. HDPE / PPCP PLASTIC:- CLOSING CAPS. MSBRIGHT MATERIAL:- PINS MADE OF DIA.45MM & DIA.35MM. BEARINGS:- PERMANENT LUBRICATED BEARINGS “30206”, “6205” & “6007” OF REPUTED BRAND ARE USED. NUT & BOLTS:- HIGH TENSILE STEEL WITH GALVANIZED NUT & BOLTS ARE USED. HANDLE GRIPS:- HANDLE GRIPS ARE MADE UP OF HIGH QUALITY RUBBER MATERIAL. POWDER COATING:- THE POWDER COATING DONE WITH PURE POLYSTER POWDER OF ACKZONOBLEOR BERGER WITH 60 TO 70 MICRON THICKNESS. 5 LEG PRESS, LENGTH:- 1700MM, WIDTH:- 380MM, HEIGHT:- 1550MM, SAFE AREA:- 2.8 MTR X 1.4 MTR, LEG PRESS MADE UP OF “B” CLASS GI PIPE OF DIFFERENT NB. NB STANDS FOR NOMINAL,BORE SIZE I.E. INTERNAL DIAMETER OF PIPE IN MILLIMETERS. 100MM NB:- MAIN FRAME. 80MM NB:- FOUNDATION MAIN PIPE. 32MM NB:- SEAT FRAME DULY BEND. 25MM NB:- FOOTREST SUPPORT FRAME. MS ANGLE 23 X 23 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS PIPE 19 X 38 X 1.8MM:- FOUNDATION SUPPORT FRAME. Φ60MM SEAMLESS PIPE:- BUSHES. MS SHEET OF SIZE 330 X 300 X 1.8MM:- SEAT AND BACKREST. MS SHEET OF SIZE 245 X 113 X 2.8MM:- FOOTREST SUPPORT. HDPE / PPCP PLASTIC:- CLOSING CAPS, LEG PRESS FOOTREST, BASE COVER. MS BRIGHT MATERIAL:- PINS MADE OF DIA.25MM. BEARINGS:- PERMANENT LUBRICATED BEARINGS “6205” OF REPUTED BRAND ARE USED. BEARINGS END CAP:- MADE UP FROM NYLON MATERIAL. NUT & BOLTS:- HIGH TENSILE STEEL WITH GALVANISED NUT & BOLTS ARE USED. CIRCLIPS:- THE CIRCLIPS ARE USED FOR LOCKING IS MADE UP OF A24. Φ50MM PU BUSH:- STOPPER MADE UP FROM Φ50MM PU BUSH. POWDER COATING:- THE POWDER COATING DONE WITH PURE POLYSTER POWDER OF ACKZONOBLE OR BERGER WITH 60 TO 70 MICRON THICKNESS. 6 ROWER, LENGTH:- 1200MM, WIDTH:- 1000MM, HEIGHT:- 800MM, SAFE AREA:- 1.5 MTR X 1.5 MTR, ROWER EQUIPMENT MADE UP OF “B” CLASS GI PIPE OF DIFFERENT NB. NB STANDS FOR NOMINAL BORE SIZE I.E. INTERNAL DIAMETER OF PIPE IN MILLIMETERS. 80MM NB:- ROWER BASE LINK, FOUNDATION MAIN PIPE. 50MM NB:- ROWER UPPER LINK. 25MM NB:- CONNECTING LINKS, HANDLE LINK DULY BEND. MS ANGLE 23 X 23 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS PIPE 19 X 38 X 1.8MM:- FOUNDATION SUPPORT FRAME. Φ50MM SEAMLESS PIPE:- BUSHES. MS SHEET OF SIZE 330 X 300 X 1.8MM:- ROWER SEAT HDPE / PPCP PLASTIC:- CLOSING CAPS, BASE COVER. MS BRIGHT MATERIAL:- PINS MADE OF DIA.17MM. BEARINGS:- PERMANENT LUBRICATED BEARINGS “6203” OF REPUTED BRAND ARE USED. NUT & BOLTS:- HIGH TENSILE STEEL WITH GALVANIZED NUT & BOLTS ARE USED. CIRCLIPS:- THE CIRCLIPS ARE USED FOR LOCKING IS MADE UP OF A16. HANDLE GRIPS:- HANDLE GRIPS ARE OF HIGH QUALITY RUBBER MATERIAL. POWDER COATING:- THE POWDER COATING DONE WITH PURE POLYSTER POWDER OF ACKZONOBLE OR BERGER WITH 60 TO 70 MICRON THICKNESS. 7 SHOULDER BUILDER-Pipes used of TATA or JINDAL make Centre pipe is of OD 138 mm of thickness 5.2 mm. All pipes should be of C class heavy grade as per IS 1239 (Highest thickness as per IS 1293) are galvanized and zinc dipped Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs.Bearing caps are made up of SS 304 material, avoided FRP and plastic to maintain the environment the safe and for life long durability against corrosion, ageing and survival in all seasons, vandalism and theft. Foot rests (foot paddles) are made up of anti-rust LM-26 Aluminium alloy to have lifelong durability with environment friendly material Designed as per the comfortable landing of foot and antiskid wide to accommodate the shoes. Bearings used are of maintenance free self-lubricated SKF make and of 2RSI rubber seal type. 8 SIT UP BOARD, LENGTH:- 1700MM, WIDTH:- 1350MM, HEIGHT:- 900MM, SAFE AREA:- 2.5 MTR X 1.6 MTR, ABB TRAINER EQUIPMENT MADE UP OF “B” CLASS GI PIPE OF DIFFERENT NB. NBSTANDS FOR NOMINAL BORE SIZE I.E.INTERNAL DIAMETER OF PIPE IN MILLIMETERS. 100MM NB:- CENTRE COLUMN. 80MM NB:- FOUNDATION MAINPIPE. 50MM NB:- FOOTREST, SIT UP BOARD SUPPORT. 32MM NB:- HANDLE FRAME, SEAT FRAME, SUPPORT. 25MM NB:- SIT UP BOARD SUPPORT FRAME, CONNECTING LINKS, HANDLE. MS PIPE OF DIA.125 X 3MM:- FOR PRIME STAND SLEEVE. MS ANGLE 23 X 23 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS PIPE 19 X 38 X 1.8MM:- FOUNDATION SUPPORT FRAME. MS PLATE OF 8MM:- SIT UP BOARD PROFILE. FRP MATERIAL:- SIT UP BOARD. HDPE / PPCP PLASTIC:- CLOSING CAPS, BASE COVER. NUT & BOLTS:- HIGH TENSILE STEEL WITH GALVANISED NUT & BOLTS ARE USED. POWDER COATING:- THE POWDER COATING DONE WITH PURE POLYSTER POWDER OF ACKZONOBLE OR BERGER WITH 60 TO 70 MICRON THICKNESS 9 Sky Walker,Length:- 1700mm, Width:- 600mm, Height:- 1650mm, Safe Area:-2.7 Mtr. X 1.6 Mtr. Sky Walker equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. 80mm NB:- Prime stand duly bend, foundation main pipe. 32mm NB:- Handle frame, support. 25mm NB:- Handle grip duly bend. MS pipe of Dia.100 x 5mm:- Sky walker I-part. MS pipe 48 x 48 x 2.8mm:- Pedal link. MS flat of 38 x 9mm:- For pedal support. MS flat of 48 x 4mm:- For pedal assembly, support. MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. Φ50mm seamless pipe:- Bushes. Φ60mm seamless pipe:- Bushes. MS sheet of size 245 x 113 x 2.8mm:- Footrest support. HDPE / PPCP Plastic:- Footrest, Closing caps. MS bright material:- Pins made of Dia.25mm. Bearings:- Permanent lubricated bearings “6205” of reputed brand are used. Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. Circlips:- The circlips are used for locking is made up of A24. Handle grips:- Handle grips are of high quality rubber material. Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness. 10 SURF BOARD DOUBLE-Pipes used of TATA or JINDAL make Centre pipe is of OD 138 mm of thickness 5.2 mm. All pipes should be of C class heavy grade as per IS 1239 (Highest thickness as per IS 1293) are galvanized and zinc dipped Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. Bearing caps are made up of SS 304 material, avoided FRP and plastic to maintain the environment the safe and for life long durability against corrosion, ageing and survival in all seasons, vandalism and theft. Foot rests (foot paddles) are made up of anti-rust LM-26 Aluminium alloy to have lifelong durability with environment friendly material Designed as per the comfortable landing of foot and antiskid wide to accommodate the shoes. Bearings used are of maintenance free self-lubricated SKF make and of 2RSI rubber seal type. 11 CROSS TRAINER-Pipes used of TATA or JINDAL make Centre pipe is of OD 138 mm of thickness 5.2 mm. All pipes should be of C class heavy grade as per IS 1239 (Highest thickness as per IS 1293) are galvanized and zinc dipped Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs.
