DESIGN, ENGINEERING AND CONSTRUCTION OF CIVIL WORKS OF NEWLY CONSTRUCTED 33/11 KV, 10MVA SUB STATION AT CHANDGAM PULWAMA UNDER SCHEME Construction of 33/11kV, 1*10 MVA Receiving Station at Chandgam Pulwama (PDDSS2526100247) underUT Capex 2025-26- 1 Design and Engineering, of civil works ( construction of Control Room building with truss, Chain link fencing with protection wall, Brick walling with protection wall, Transformer & Equipment foundations, cable trunch ,approach road , surface drain and other allied works ) of proposed 33/11 kv substation including soil testing of site complete 2 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. 3 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge for 0rdinar rock soil 4 P/L of soling stone dry hand packed in layers 5 P/L cement conc. 1:4:8 with 40 mm nominal size of stone aggregates of spacified grade 6 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 9 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 10 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 11 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) 12 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete 13 Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc 14 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. 15 Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers 16 Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts 17 P/L cement Concrete Flooring 50mm thick (M-15) in 1:2:4 mix with 25 mm niminal size agg. Of spacified grade 18 B/W with common burnt clayF.P.S bricks of class designation 7.5 in cement mortar 1:6 mix ( 1 cement : 6 course sand) 19 B/W with F.P.S bricks of class designation 7.5 in 1:4 mix 20 Extra for B/W between plinth and super/str. Q.V.I No. 60% of 19&20 21 Providingwoodworkinframesofdoors,windows,clerestorywindowsand other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fastlugs or with dash fastenersshall be paid for separately): in First class kail wood 22 P/F MS hold fasts for doors and windows 23 S/L of GSB/nallah muck or boulders under floors incl.Ramming watering dressing and incl. carriage complete 24 Steel reinforcementforR.C.C.workincludingstraightening,cutting,bending,placing in position and binding all complete 25 15 mm thick cement plaster 1:6 mix 26 Kotastoneslabflooring25 mmthickover20mm(average)thickbase laidoverandjointedwithgreycementslurrymixedwith pigmentto matchtheshadeoftheslab,includingrubbing,polishingandcuring complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 27 Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laidon12mm(average)thickcementmortar1:3(1cement:3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. 28 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded) 29 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Grill and gate work) 30 Steelworkweldedinbuiltupsections/framedwork,includingcutting, hoisting,fixinginpositionandapplyinga primingcoatofapprovedsteel primer using structural steel etc. as required in stringers, treads, landings etc. ofstaircases,includinguseof chequered plate wherever required, all complete 31 P/F of GI round, threaded 22 mm foundation bolts 1200mm long with washers and nuts complete and nuts bolts of different sizes 32 ProvidingandfixingG.I.chainlinkfabricfencingofrequired width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer -incharge. (Made of G.I. wire of dia 4 mm) 33 P/F of GI Barbed wire on angle posts 34 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumenandG.IlimpetwashersorwithG.I.limpetwashersfilledwith whitelead,includingacoatofapprovedsteelprimerandtwocoatsof approvedpaintonoverlappingofsheetscomplete(uptoanypitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (0.63 mm thick with zinc coating not less than 275 gram/m2) 35 Providingridgesorhipsofwidth60cmoverallwidthplainG.S.sheets fixed with polymercoatedJ.orLhooks,boltsandnuts 8mm dia G.I.limpet and bitumen washers complete. (0.63 mm thick with zinc coating not less than 275 gram/m2) 36 P/F Eaves boarding of 2nd class kail wood250mmx32mm nominal size 37 P/F 20mm thick wooden plank T&G ceiling under soffits. 38 Providingandfixingpanelledorpanelledandglazedshutters35 mm thick in first class kail wood fordoors,windows and clerestory windowsfixing withbutt hinges of requiredsize with necessaryscrews,excludingpanellingwhichwillbepaidforseparately,all completeasperdirectionofEngineer-in-charge 39 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick of 12 mm thick Coir Veneer Board (conforming to IS: 14842)60% of Q.V.I no.33 Doors 40 P/F sheet glass of ordinary Quality fixed with wooden beidings(4mm thick) 65% of Q.V.I no.33 Windows 41 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws ( 35mm thick) of 1st class kail wood 42 P/F of almunium fittings complete job like handles tower bolts, hooks, Ms stays,L drops 43 Providing and applying POP/ Wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 44 Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work Q.V.INo.38 45 Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture = 1.5 times of Q.V.INo. 17 46 Painting of Chain Link Fencing incl priming coat.(on two sides) 47 Providing and fixing 0f 18 mm thick granite of any colour or shade gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) 48 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 49 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. . 50 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m 51 Supplying,stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) and laying spreading in layers, watering compacting complete job with all carriages upto the site (Yard area) 52 SITC of submersible 3 HPmotor with starter and other accessories including making all connections complete job 53 Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), with hire and running charges of all equipment tools plants and machineries required for the job,including supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 125 mm nominal bore size having min thickness of 5 mm conforming to IS: 4270 of reputed & approved make painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture alongwith P/F of 32 mm dia nominal bore GI Pipes complete with GI fittings in verticle position as per direction of Engineer-in-charge upto 90 m depth below ground level. All types of soil 54 Supply ,fixing, cutting, straightening, jointing ,welding and fabrication complete job of GI flat iron of 50x8mm for earthingmat of yard including painting at joints with black paint 55 supply ,fixing, cutting, straightening, jointing ,welding and fabrication complete job of GI Pipes of 40mm Dia 3m long for earthingmat of yard with enhanceing material ofcharcoal & salt at alternate layers complete job 56 Making of Earth chambers,alongwith PVC Pit coversin Brick Masonery/cement concrete 1:2:4 mix. 57 Providing / Installation of Copper bonded Chemical Earthing electrode 2mtr long 300 micron. 58 Providing / Installation of GI bonded Chemical Earthing electrode 2mtr long 300 micron. 59 Providing / Installation copper bonded Earthing electrode 3mtr long. 60 Providing and laying of PVC pipes of 150/100/75mm Dia alongwith the plain PV Bends and Fittings underground in piecemeals/sectionwise for control cable ducting from 33/11kv equipment to cable trench i/c earth excavation of earth. 61 Providing and laying of PVC pipes of 75mm Dia, pierced for wheep holes vertically underground ,each2mtr long for water treatment i/c earth excavation of underground pit. 62 Supply and stacking at site graded stone aggregate of sizes 45mm-63mm (crushed) 63 Laying ,spreading & levelling at site ofstone aggregate of 45mm-63mm 64 P/f of Door Latches heavy Type 65 Carriage of material by mechanical transport from source to site of workStonne soling at an avg lead of 10 km 66 Carriage of material by mechanical transport from source to site of workStone agg. 12.5/20/40mm and above av. lead of 10 km 67 Carriage of material by mechanical transport from source to site of workBricks av. lead of 25 km 68 Carriage of material by mechanical transport from source to site of workSand at an av. lead of 10 km 69 Carriage of material by mechanical transport from source to site of workCement at an avg lead of10 km 70 Carriage of material by mechanical transport from source to site of workSteel/CGI Sheets at an avg lead of10 km 71 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 16mm OD(SDR-7.4) 72 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 20mm OD(SDR-7.4) 73 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc.PN-16 pipe , 25mm OD (SDR-7.4) 74 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 75 Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 76 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 77 Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 78 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia 79 P/F CP gratings 100mm dia 80 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25/20 mm nominal bore 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm 82 P/F Water closet squating pan ( indian type) with 100 mm dia p and s trap and 10 ltr pvc cistern complete 83 P/F of wash- basin with C.I /MS bracket 15mm CP brass pillar tap 32 mm dia waste pipe of standard pattern 84 P/F of white viterous china pedestal for wash-basin 85 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet (100mm dia) 86 P/F of Mirror with plastic moulded frame rectangular shape 453x357 mm 87 P/F of soap dish container 88 P/F PVC tubes for connections 89 P/F soil waste went pipe PVC100mm dia 90 P/F soil waste went pipe PVC75mm dia 91 P/F water heater/ gyser of approved quality 50 ltr capacity = 1No/e.(Venus) 92 P/F water heater/ gyser of approved quality 25 ltr capacity = 1No/e.(Venus) 93 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 94 Construction of inspection chamber incl. of brick work e/w, plaster,flooring,Cement conc. Mainhole cover and lidInside dimensions 500x700 mm and 45 cm deep for singlepipe line with one or two inlets 95 Construction of inspection chamber incl. of brick work e/w, plaster,flooring,Cement conc. Mainhole cover and lidInside dimensions 455x610 mm and 45 cm deep for single 96 P/F of 22mm/25mm/38mm dia PVC conduits incl. cap casing of 2mm thickand its acessories like bends function box etc to be acessed well and fixed on wall rawal plug and cadles = 1000Rft 97 P/F of light points/fan points wiring with 2.5 mm multi-sranded copper wires PVC insulated wire of approved quality through PVC conduit but excl. cost of conduit= 50 points 98 P/F testing and commissioning Of heating points in 4mm multi-strand 7/36 insulated copper wire of approved quality through PVC conduit excl. cost of conduit but incl. cost of 1mm multi-strand 1/18 PVC insulated copper wire for earthing. 99 P/F testing/commissioning 20 Amp flush type switch of anchor roma series 100 P/F testing/commissioning of 20 Amp twin socket heavey duty of anchor roma series 101 P/F connecting leg of 10/40/63 Amp double pole MCB with its all accessories 102 P/F testing and commissioning of 225mm exhaust fan micron make complete with ceiling rose and silicon wire 103 P/F of modular Electric switch board on walls of different sizes of reputed make 104 P/F of MCB distribution board double door 16-way Havells make = 1No. 105 P/F of MCB distribution board double door 8-way . 106 P/F testing/commissioning of 6 to 20 Ampsingle pole MCB with its all necessary connections . 107 P/F testing and commissioning of ceiling fancomplete with ceiling rose and silicon . 108 Supply laying commissioning of main service line by 10mm2 copper wire multi-strand single core cable with its all accessories 109 Supply laying commissioning of main service line by 16mm2 copper wire multi-strand single core cable with its all accessories 110 P/F testing and commissioning of 9 watt LED bulbs of Philips make= 15No (LED) 111 Making of earthen pit by way of digging 8 depth and 6’ dia pit incl. earthing electrode connecting the electrode with the main board by 8swg single strand copper cotton insulated through conduit pipe then filling the pit by alternate layers of charcoal and salt and making of main hole cover with lid complete job= 1 job 112 Providing of kitchenware items like utensils.induction cooker,matting,chairs and tables curtains,beddingand refirgerator 200 ltretc 113 P/F of Outdoor Bulk-Head lights heavy duty of standard make including bulbs inside 114 P/Fand laying of RCC pipes (36 dia)in proper position including excavation of trenches and refiling of excavated materials over pipes as cushions includingall carraiges of pipes etc complete job
