Tender For Special Repair Of Bldg No Cb 32 At Inf School Under Ge Mis Mhow; 1 Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar complete all as specified and directed. 2 Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing )and rubbish off the primeses complete all as specified and directed. 3 Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise complete all as specified and directed. 4 M&L forVitrified Tiles9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.36 sqmbut not exceeding 0.75 sqm ( ie)size 600x1200 in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and directed. 5 All as per item No 4.00above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified and directed. 6 M&L forvitrified ceramic tiles9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm (600x600 mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified and directed. 7 All as per item No 6.00above but as in skirting/ dado etc over and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 8 M&L for glazed ceramic coloured tilesof size not less than 450x300x7 mm thickon vertical surfaces such as wall ,dado,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 15 mm thick backing coat on fair faces of brick work in CM 1:4 complete all as specified and directed. 9 M&L for non skidceramic colouredtiles 7mm to 8mm thick (square/rectangular)of size 300x300mm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match with colour of tileover and including 15mm thick screed bed or bedding layer in cement mortar 1: 6 complete all as specified and directed. 10 M&Lfor machine cut kota stone slab inflooring 20mm to 25mm thick laid over and including 15mm thick screed bed in cement mortar1:6 and pointed withcement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified 11 M&Lfor 18mm to 20 mm thickGranite slab work (table rubbed and polish) of approved quality ofrequired sizein floor,wall,cooking platform and like beddedand jointed in greycement slurry and pointed with coloured cement (1:2) usig marble dustwith admixture of pigment to match the shade of granite stonelaid over and including 20 mm thick screed bed in cement mortar 1:4including polishingby using mechanical grindercomplete allas specified anddirected. 12 M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) for levelling course in floors complete all as specified anddirected. 13 M&Lfor 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colourconferming to IS 15658-2006 andincluding joints filled with sandcomplete all as specified and as directed. 14 M&Lfor chequered cement concrete tiles with grey cementand pigment of size 20cmX20cmX20mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified 15 M&L for25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) for levelling course in floors complete all as specified anddirected. 16 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. 17 S&F in repairs Solid PVC Wall Lining/panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. 18 S&F Gypsum Board 12mm thick Seamlessceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 19 M&L for GI snap grid framework including 4mm thick Desginer E-boards for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces dulypowder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c.Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c.Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c.To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheetof length 600mm is placed inside the module of size 1200x600mmincluding suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed 20 Demolition of brickwork built in cement mortar or cement lime mortar including all quoins arches pillars etc complete all as specified and directed. 21 M&Lfor brick work with using flyash bricks modular size, straight or curved on plan exc. 6.00m mean radius built in cement mortar 1:6. etc complete all as specified and directed. 22 M&L for brick work with using flyash bricks modular size, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified anddirected. 23 Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water,etc. complete removal of debris outside MD land complete all as specified anddirected. 24 Scrubbing down unevevan surface of wall to achive plan and even surface of wall,to be carried out by machanical means complete all as specified anddirected. 25 M&L for rendering 15mm thick cement plaster in CM 1:6 onfair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. 26 M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag of cement, finished even and fair without using extra cement complete all as specified anddirected.Note:- Liquid water proofing compound to be measured paid separately. 27 M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 28 Supply onle liquid water proofing Compound @ 200ml per beg of cement complete all as specifed and directed. 29 M&L for applying two coats offirst quality oil emulsion distember over a coat of primer over acoat of Acrylic / Water proofing wall Putty on walls complete all as specified anddirected.Note:- Putty shall be measured and paid for separately. 30 M&L for preparation of old decorated surface of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasyspotsand stopping nails marks and applying two coats offirstquality oil emulsion distemper white/coloured over a coat of Acrylic / water proofing wall Putty (where ever required at sitein patches) all as specified and directed by Engineer-in-Charge. Note:- Putty shall be measured and paid for separately. 31 M&L for new plastered surfaces of wall,pillasters, cornices etc precoat treatment and applying two coats of Anti fungal Weather coat Acrylic emulsion paint over a one coat of wall care acrylic putty and a coat of primer (X2) complete all as specified and directed. 32 M&L for complete removal of old decorated plastered surfaces (mechanical means) of wall, pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatmentand applying two coats of Anti fungal weather coat Acrylic emulsion paint over one coat of wall care acrylic putty and a coat of primer (X2) complete all as specified and directed. 33 M&L for preparation of newly/old plastered surface of wall and and applying2 mm thick Acrylic / water proofing wall putty in two coats (each coat not less than 1mm thick )and surface finished even and smooth with sand paper complete all as specified and directed. 34 M&L for complete removal of of old plastered surfaces of ceiling andapplying chalk whiting primer on ceiling surfaces and applying two coats of white wash complete all as specified and directed. 35 M&L for two coats of white washing on newly plastered / concrete celling sufaces incuding preparation of surfaces complete all as specified and directed. 36 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each complete all as specified and directed. 37 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each complete all as specified and directed. 38 Taking down shutters of any description exc 1 Sqm and n.exc 2Sqm each complete all as specified and directed. 39 S&F2nd class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as directed and specified. 40 S&F35 mm thick second class hard wood rail and style plain framed factory made, panelled shutter with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 41 S&F 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed. 42 M&L for preparation of new wooden surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer, transparent, and bringing forward surfaces to smooth even finish, complete all as specified and directed. 43 M&L for preparation of old painted surface of wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. 44 S&F stainless steel sliding door 300mm length, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections complete all as specified and directed. 45 S&F 150mmstainless steeltower bolts of extruded section with 150 mm long bolt complete all as specified and directed. 46 S&F 150 mm stainless steelhandles fabricated type anodised 150mm size complete all as specified and directed. 47 S&F floor door stopper of SS body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified and directed. 48 S&F mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. 49 Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick complete all as specified and directed. 50 S&Fin repairs curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets in both sides fancy type complete all as specified and directed. 51 S&Ffabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partitions with one or more rebates sections of approved tint as required for partitions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etccomplete all as specified and directed. 52 S&F aluminium coloured power coated partition,window , ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screwscomplete all as specified and directed. 53 S&F 3mm thick Aluminium Composite Panels (ACP) any colour offor fixing in Alumimium door/partition//Wall Lining with all other necessary accessories for fixing complete all as specified and directed. 54 S&F in repairs aluminium coloured power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. . 55 S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. 56 S&F stainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. 57 S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed. 58 S&Fmild steel framed work such as grills, gratings, guard bars for windows, and ventilators,barred iron work, ladders, framework of water tanks and similar work complete all as specified and directed. 59 S&F factory made 30 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 600 kg kg/cbm, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed. 60 S&Ffactory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour/wood grain PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. 61 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour /wood grain PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. 62 S&Ffactory made 100% solid WPC (Wood polymer composite) Door frame 65mm X 100mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-charge. 63 S&F18 mm thick factory made PVC cellukasheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed. 64 S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed 65 S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed . 66 S&F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . 67 S&Fin repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arranementcomplete as specified and dirceted. 68 All as per item No 67.00 above but basket size 0.50 m x 0.53 m x 0.15 m 69 All as per item No 67.00above but basket size0.50 m x 0.53 m x 0.21 m. 70 Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed. 71 Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed. 72 S&Fin repairs Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part Icomplete all as specified and directed. 73 S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed. 74 All as per item No 73.00 above but 20mm bore. 75 S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specifiedand directed 76 S&F in repairCP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified. 77 S&F in repairfancy type chromium plated15mm boretwo way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. 78 S&F in repairCP toilet paper holder complete all as specified and as directed. 79 S&F in repairvitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . 80 S&F in repairs vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed . 81 S&F in repairsPVCvalve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified and directed. 82 S&F in repairs CP Health faucetmild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified 83 S&F in repairs vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed . 84 S&F in repairsvitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal complete all as specified and as directed 85 S&F PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. 86 S&F in repair 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer omplete all as specified and directed. 87 S&F in repair beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer Size exc 0.13 sqm but n exc 0.67 sqmcomplete all as specified and directed. 88 S&F in repair PVC connection15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. 89 S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed omplete all as specified and directed. 90 S&F in repair 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 91 S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. 92 S&F in repair 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 93 S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. 94 S&F 40mm Bottle trap of SS having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. 95 S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed 96 Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed 97 Excavation in post hole (or similar holes) each n. exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil complete all as specified and directed. 98 M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone agrregate) as in foundation of posts, railing and similar work complete all as specified and directed. 99 S&F 0.50mm thick (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting / sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. 100 S&Fplain, galvanised, mild steel sheeting0.63 mm thickness as inridges,hips, valley gutters onroof,with grade of zinc coating 275 with all fixing arrangement complete all as specified and directed. 101 S&F mild steel hollow ,Joist, channel, angle,tee or tubular Sectionwork in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified . 102 S&F mild steel Joist, channel, angle, or tee sections,door frame cleats, etc fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. 103 M&L for preparation of newlysteel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. 104 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping)etc rough finished surface complete all as specified and as directed. 105 S&F mild steel high TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and as directed. 106 M&L for RCC M-20 grade concrete (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and as directed.Note: Reinforcement shall be measured and paid separately. 107 M&L for25mm thick plain cement concrete 1:2:4type B1 (using 20mm graded stone aggregate)as in leveling course and other works as in roof, kerb, coping, padding etc complete all as specified and as directed. 108 S&FAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed. 109 M&L for applying bitumen blown any grade two coats, to concrete surfaces at the rate of 1.50kg. per sqm per coat complete all as specified and as directed. 110 M&L for 10 mm thick rendering in CM 1:3 with WPC on fair faces of brick work or concrete surface finished even & smooth without using extra cement complete all as specified and directed.Note: WPC shall to measured and paid seprately. 111 M&L forbrushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compoundas specified and directed.Note: WPC shall be measured and paid separately. 112 M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete all as specified and directed. 113 S&FPowder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(ii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iii)4 mm thickglass superior quality.(Min)(iv) IDPE Rubber guasket for fixing of glass.(v)Locking cleats per shutter -01 Nos.(Min)(vi)Sliding rollers per shutter - 02 Nos.(Min)(vii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(viii)fixing screw for frame with wall per windows- 08 Nos. 114 S&F 12 mm thick frosted toughned glass fixed on patch hinges/pivot for smooth functioning in door shutter inc stainless steel handle of 8 inches long anfd mortice locking arrangement complete all as specified and directed. 115 S&F in repairs5 mm thick high pressure compact laminate (HPCL) minimum density 800kg/Cum, HPCL sheet are providing higher endurance and spectacular design forwalls facade,Ceiling and enhance the over all stability of facade structure including all fittings complete all as specified and directed. 116 Taking down and refixing shutter (any size ) in same opening ,complete removal of old treatment ,finish the surface and one coat of primer and two coat of PU spray paint ,fixing in same opening complete all as specified and directed 117 Grinding of oldkota stone /marble mirror polishing inc wax complete all as specified and directed 118 M&L for finishing wall with texture interior paint of required shade on external old/new wall (Two or more coats applied @ 3.28 ltr/10 sqm) surface over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm complete all as specified and directed by Engr in Charge. 119 S&F wood finished wood plastic compsite (WPC) wall moulding of required size including all labour and accessories complete all as specified and directed. 120 S&F vitreous Couple wash down water closet pedestal pattern Bowl with Cistern for Coupled WCwith UF soft close Slim Seat Cover Hinges, Dual Flush Cistern Fitting and fixing, the size of Accessories is 365x630x750 mm with P-Trap complete all as specified and directed. 121 M&L for preparation of new plaster surfaces and applying two coats of plastic emulsionpaint over a coat of primer, transparent, and bringing forward surfaces to smooth even finish complete all as specified and directed. 122 Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc. 123 Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/Mcomplete all as specified and as directed. 124 Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. 125 Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. 126 M&L for point wiring with 1.5 Sq mmsingle corePVC insulated unsheathedcopper FRLSH multi stranded conductor cable inin existing concealedconduit & making good the disturbed surface of wall with and includingmodular sunken anodisedsteel box for housing modular switch socket , regulator etcincluding modular cover plate and cover frame of any moduleISI marked of suitable size complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses as per site requirement and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for the following:-(a) One light point/fan point controlled by one switch 127 (b) One 5amps socket out let point controlled by one switch on same board with other switches. 128 (c) One 5amps socket out let point on independent board controlled by one switch. 129 All as per item No 126.00 above butusing 2.5 sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent boardincluding necessary running of2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. 130 M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC FRLS concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly includingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-(a) One light point/fan point/Bell controlled by one switch 131 (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. 132 (d)One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. 133 All as per item No 128.00 abovebutusing 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point) 134 S&F Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified and directed. 135 S&F Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified and directed. 136 S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified and directed. 137 S&F ModularSocket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 modulecomplete all as specified and directed. 138 S&F Modular Bell push modular 6 Amps single module complete all as specified and directed. 139 S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed 140 S&F ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified and directed. 141 S&F in repairs LED round light fitting 15W recess mounting type, white light LED or warm light LED 6500K as per site requirment complete with driver duly connection with coppercable etc. complete all as specified and directed by Engr-in-Charge. Make: Havells Cat No. LHEBLDP7IN1W015/ Bajaj Cat Pt No. BGSLO SLEEK 15W WH RD, / Crompton / Wipro /Philips as approved by GE.Note :- Ceiling cutout ø 180 mm, height 23 mm ±1 mm for 15 W 142 S&F in repairs LED luminaire600 mm x 600 mm square LED panel 35/36 watts, 220 volts, lumen efficacy of 120 lumens/watt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-Charge. Make: Havells / Bajaj/ Crompton / Wipro /Philips as approved by GE. 143 S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxes complete all as specified and directed by Engr-in-Charge. Make:- Havells Cat No. LHEXBLP7PN1W018/ Bajaj cat Pt No. BCLSB 18WH/ Crompton / Wipro /Philips as approved by GE. 144 S&F in repairs LED light fitting 2 feet10 watts, 6500K battenaluminium extruded withend caps complete all as specified and directed by Engr-in-Charge.Make: Bajaj Cat No LHEXACP7IN1W010 /Havells / Crompton / Wipro /Philips as approved by GE. 145 S&F in repairs Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm diamedium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed by Engr-in-Charge. Make: Bajaj Cat No ENXT P 36L WH CR PC SD /Havells / Crompton / Wipro /Philips as approved by GE. 146 S&F in repairs Wall light fittings suitable for white light or warm light LED bulb 9 wattwith & including LED bulb of 9 watt, including connection with all necessary fixing accessoriescomplete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. LHFOECE1TZ1B014 /Bajaj / Crompton / Wipro /Philips as approved by GE. 147 S&F in repairs post top lantern LED Type 20watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.Make: Bajaj cat Pt No. BGCTNP20W LED WH/WW 18WH /Havells / Crompton / Wipro /Philips as approved by GE. 148 M&Lforsub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC FRLS non metallic rigid heavy duty conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable sizeincluding concealed in wall etctwo runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed.Note:- Four runs of 6 Sqmm cable, two runs of 6 Sqmm cable and one run of PVC conduit will be measured as one unit. 149 M&L forsub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq. mm nominal area and drawing into suitable size of PVC FRLS non metallic rigid heavy duty conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable sizeincluding concealed in wall etcone runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed.Note:- Two run of 6 Sqmm cable, one runs of 6 Sqmm cable and one run of PVC conduit will be measured as one unit 150 S&F in repairs flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08, with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of space for TP/FP 160 amps G FrameMCCB as incomer and SP/TP MCBs as out going 8 way complete all as specified and directed by Engr-in-Charge. 151 S&F sheet metal enclosure MCBDBTPN4 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system, IP 43, IK 09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. 152 S&F sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system, IP 43, IK 09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. 153 S&F in repairs MCCB 4 pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for160 Amps fixedtypewith breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge. 154 S&F in repairs MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. 155 S&F in repairs MCB TP 25 to 63 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. 156 S & F MCB SPN 40 Amp 10 KA, C series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. 157 S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity,B series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. 158 S&F metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socketwith MCB SP 20/32 Ampsincluding removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed 159 S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length ofdown rods, with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Min air delivery 210 CFM with service value greater than 7.00 BEE. Five star rated, provide electrical connection from ceiling rose to fan terminal by providing flexible cable threecore Copper conductor of size23/0.0076 (3 Core x 0.50 Sqmm), ISI marked and write down MES Number on fan by black paint/Marker complete all as specified and directed by Eng-in-Charge.Make: Havells/Orient/Bajaj 160 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed. Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin the quoted rate. 161 M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate otlessthan 1.5 metres below normalground level, connected togalvanised earth lead wire 4.0mmdia by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.50m from earth plate is deemed to be included in rate quoted.
