Tender For Miscellaneous Maintenance Work Of Staff Quarter In Sector Beta-I For Three Years, Greater Noida. - Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part-1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 3 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.DSR-18/ 9.21.1 4 Steel work welded in built up sections/ framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. (DSR-18/10.25.2) 5 Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 6 Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge stone ballast.As per SOR-20/item no. 279(A) 7 Providing and fixing 25 mm thick shutters for cup board etc. 8 Panelled or panelled & glazed shutters: 9 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 10 DSR-18/14.26.1.1 11 Providing and fixingwire gauge shutters using galvanised MS wire gauge of average width of aperture 1.40mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windowswith hinges with necessary screws: 12 30mm thick shutters: with ISI marked M.S pressed buthinges bright finished of required size second class teak woodDSR-18/9.27.2.1.1 13 Providing and fixing 2nd class teak wood lipping/moulded beading or taj beading of size 18X5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge 14 DSR-18/9.112 15 Finishing walls with textured exterior paint of required shade 16 New work (Two or more coats applied @ 3.28 ltr/10sqm) over and including priming coat of exterior primer applied @ 2.20 Kg /10Sqm. 17 DSR-18/13.45.1 18 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.As per SOR-20/649/15.09 19 As in item (649) above but for every coat after the first coat SOR-20/650/15.10 20 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950, 21 As in item (647) above but for every subsequent coat on previously treated surfaceSOR-20/647+648 22 Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.SOR-20/279/5.06 23 As in item 279 above but in proportions of 8:4:1, SOR-20/281/5.08 24 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand): a)25mm thick (DSR-11.26.1 25 Providing and laying 60mm thick I.S.I mark factory made cement concrete interlocking concrete paver blockmade by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour of M-35 and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge with coforming to IS-15658 and IRC:SP:63 DSR-18/16.68 (AR/GNIDA) 26 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground all complete as per direction of Engineer-in-Charge. 27 With cement mortar 1:4 (1cement: 4 coarse sand) 28 DSR-18/14.1.2) 29 Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR-18/13.26) 30 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 31 300x10 mm (DSR-18/9.97.1) 32 150x10 mm (DSR-18/9.97.4) 33 Providing and fixing aluminium handle, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 34 125mm (DSR-18/9.100.1) 35 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyned to required colour or shade, with nuts and screws etc. complete: 36 300x16 mm (DSR-18/9.96.1) 37 Providing and fixing aluminium hanging floor door stooper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 38 Single rubber stopper (DSR-13/9.101.1) 39 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi-rigid pipe. 32mm dia. DSR-18/17.28.1.1 40 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DAR 17.1.1 41 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 42 W.C. pan with ISI marked white solid plastic seat and lid, DAR.17.2.1 43 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 44 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps, DAR. 17.7.1 45 Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931: 15mm nominal bore (DSR-18/18.49.1) 46 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore.DSR-18/18.50.1 47 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size (200x300) as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR-18/8.31 48 Dismantling G.I. Pipes (externalwork) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge:15mm to 40 mm nominal bore. 49 DSR-18/15.44.1 50 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required: 51 15mm nominal bore DSR-18/18.47.1 52 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc.External work 53 25mm dianominal bore 54 DSR-18/18.12.3 55 Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.For thickness of tiles 10mm to 25mm 56 DSR-18/15.23.1 57 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 58 15 mm nominal outer dia pipe DSR-18/18.7.1 59 Providing and fixing uplasticised PVC connection pipe with brass unions:30cm length. 60 15 mm nominal bore DSR-18/18.21.1.1 61 M-150 Brick Work in 1:4 cement & Coarse sand 2.2 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. 62 SOR-20/305(A) 63 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 64 Raj Nagar Plain white marble/Udaipur green marble/Zebra black marble.Area of slab upto 0.50 Sqm. (DSR-2018/8.2.1.1/AR) 65 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with: 66 Raj Nagar plain DSR-18/11.23.2 67 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm As per DSR-18/11.49.2 68 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10mm to 25mm. 69 DSR-18/15.23.1 Tarrace 70 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate 71 DSR-18/11.3.1 72 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: ofarea 3 sq. metres and below 73 DSR-18/15.12.1 74 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S angels 40X40X6mm for diagonal braces 75 DSR-18/10.5.1 76 Providing and fixing quality ceramic glazed floor tiles 300x300 mm (thicknes to be specified by the manufacturer) of 1 st quality conforming to IS: 15622 of approved make in colours such as white, Ivory,grey, Fume Red Browm, laid on 20 mm thick cement Mortar 1:4 (1cement:4 Coarse sand) jointing with grey cement slurry @ 3.3Kg/Sqm.including pointing the joints with white cement and matching pigment etc., complete. DSR-18/11.37 77 Providing wall putty on new surface with approved quality material of Berger/J.K./Birla or similar make 2 coats.SOR-20/15.22/New item 78 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR-18/18.48 79 Providing and fixing Chlorinated Polyvinyl / Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge.Concealed work including cutting chases and making good the walls etc. 80 15 mm nominal outer dia pipes DSR-18/18.8.1 81 Providing and fixing Chlorinated Polyvinyl / Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing, this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work -Exposed on Wall, DSR-18/18.7 82 20 mm nominal outer dia pipes DSR-18/18.7.2 83 25 mm nominal outer dia pipes DSR-18/18.7.3 84 32 mm nominal outer dia pipes DSR-18/18.7.4 85 40 mm nominal outer dia pipes DSR-18/18.7.5 86 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): 87 Treatment of soil under existing floors using chemical emul-sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor: 88 With Chlorpyriphos/Lindane E.C. 20% with 1% concentrationDSR-2018/2.35.3.1/AR 89 Diluting and injecting chemical emulsion for post-constructional anti-termite treatment excluding theCost of chemical emulsion):- DSR-18/2.35 90 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.DSR-2018/2.35.5/AR 91 Labour Cess and GST will be paid extra as per govt. orders
