Tender For Renovation Of Gallery At Bardowa Museum, Nagaon-- 1 Civil Works 2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and color : Two coats 3 Gypsum Board Partition : 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks) 4 Aluminum Work : Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 5 Pre-laminated particle board with decorative lamination on both sides 6 Type -1 : Supplying and installation of pedestal (height as per drawing, 9981 wide and 400 depth), as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator. 7 Type - 2: Supplying and installation of pedestal (height as per drawing, 8210 wide and 450 depth), as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator. 8 Type - 3: Supplying and installation of pedestals (height, width and depth), as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator. 9 Backdrop : Supplying and installation of backdrop (height, wide and depth), as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator. 10 SHOWCASE : Supplying, making and fixing in positionSHOWCASE (2850 height, 2360 wide and 600 depth), as per design, with bottom part of (2360X800) and top part of (2360x600) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm clear float glass of (1650x2284) with facility for opening one side, finished with desired finish complete in all respects with allaccessories, to the full satisfaction of the Curator. 11 Supply and Installation of bench cum shoe rack (min 3 seater) made of MS frame and sheet complete with necessary priming and two coats of enamel paint of approved make and shade (l/s) 12 Supplying and installation of vinyl printed display content,photographs, signages, etc. ( as approved design) pasted on sunboard as required. 13 Supplying and installation of ACP Sign Board size( 4 x 6) complete with necessary screwing, mounting and provision of light with fixtures 14 Supply and Installation of Outdoor rubber mat size (18inch x 30 inch) of approved brand and make 15 Supply and Installation of door mat of approved brand and make 16 Supplying and fixing following modular switch/ socket onthe existing modular plate & switch box includingconnections but excluding modular plate etc. as required.2 way 5/6 A switch 17 Wiring for group controlled (looped) light point/fanpoint/exhaust fan point/ call bell point (withoutindependent switch etc.) with 1.5 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/recessed PVC conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single corecable etc. as required. Group C 18 Supplying and installation of 12- 16 watt spot light ofapproved make and design. 19 Supply, Installation, Testing and Commissioning of 3 wattspotlights (warm white) of approved brand and make 20 Supply, Installation, Testing and Commissioning ofnarrow spot light of adjustable projection angle rangingfrom 4- 12 degree of 7watt of approved brand and make 21 Supply, Installation, Testing and Commissioning ofInverter of 700Va (150 Ah) capacity with battery and rackof approved brand and make 22 Supply, Installation, Testing and Commissioning ofExhaust Fan of approved brand and make 23 Supply, Installation, Testing and Commissioning ofCeiling Fan 1200mm of approved brand and make 24 Supply, Installation, Testing and Commissioning of PVCJunction box of approved brand and make 25 Supply, Installation, Testing and Commissioning ofProfile Light (total length 15 m) inside showcase with allnecessary fixtures and hardware as per drawing
