Tender For Vanitha Fitness Centre - Gym Equipments 2 SURF BOARD DOUBLE-Pipes used of TATA or JINDAL make Centre pipe is of OD 138 mm of thickness 5.2 mm. All pipes should be of C class heavy grade as per IS 1239 (Highest thickness as per IS 1293) are galvanized and zinc dipped Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. Pipes used are properly bend with CNC bending with uniform radius bending & no joints in prime stand & in all accessories. Bearing caps are made up of SS 304 material, avoided FRP and plastic to maintain the environment the safe and for life long durability against corrosion, ageing and survival in all seasons, vandalism and theft. Foot rests (foot paddles) are made up of anti-rust LM-26 Aluminium alloy to have lifelong durability with environment friendly material Designed as per the comfortable landing of foot and antiskid wide to accommodate the shoes. Bearings used are of maintenance free self-lubricated SKF make and of 2RSI rubber seal type.with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 3 LEG PRESS DOUBLE-LegPress made up of “B” class GI pipe of different NB. NB stands for Nominal,Bore size i.e. Internal Diameter ofpipe in millimeters. 100mm NB:- Main frame. 80mm NB:- Foundation main pipe. 32mmNB:- Seat frame duly bend. 25mm NB:- Footrest support frame. MS Angle 23 x 23 x 1.8mm:-Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. Φ60mm seamlesspipe:- Bushes. MS sheet of size 330 x 300 x 1.8mm:- Seat and Backrest. MS sheet of size 245 x 113 x2.8mm:- Footrest support. HDPE / PPCP Plastic:- Closing caps, Leg press footrest, Base Cover. MS brightmaterial:- Pins made of Dia.25mm. Bearings:- Permanent lubricated bearings “6205” of reputed brandare used. Bearings End cap:- Made up from Nylon material. Nut & Bolts:- High tensile steel withgalvanised nut & bolts are used. Circlips:- The circlips are used for locking is made up of A24. Φ50mmPU Bush:- Stopper made up from Φ50mm PU Bush. Powder coating:- The powder coating done withPure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 4 CHEST PRESS DOUBLE-ChestPress equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e.Internal Diameter of pipe in millimeters. 100mm NB:- Centre pipe. 80mm NB:- Foundation main pipe.32mm NB:- Handle frame duly bend, Seat frame duly bend, support. 25mm NB:- Connecting links,handle. MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundationsupport frame. Φ50mm seamless pipe:- Bushes. Φ60mm seamless pipe:- Bushes. MS sheet of size 330x 300 x 1.8mm:- Seat and Backrest. HDPE / PPCP Plastic:- Closing caps, Base Cover. MS bright material:-Pins made of Dia.25mm & Dia.17mm. Bearings:- Permanent lubricated bearings “6205” & “6203” ofreputed brand are used. Bearings End cap:- Made up from Nylon material. Nut & Bolts:- High tensilesteel with galvanized nut & bolts are used. Circlips:- The circlips are used for locking is made up of A24& A16. Handle grips:- Handle grips are made up of high quality rubber material. Powder coating:- Thepowder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micronthickness with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 5 ROWER-Length:- 1200mm, Width:- 1000mm, Height:- 800mm, Safe Area:- 1.5 Mtr X 1.5 Mtr, Rowerequipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. InternalDiameter of pipe in millimeters. 80mm NB:- Rower Base link, Foundation main pipe. 50mm NB:- RowerUpper link. 25mm NB:- Connecting links, handle link duly bend. MS Angle 23 x 23 x 1.8mm:- Foundationsupport frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. Φ50mm seamless pipe:- Bushes.MS sheet of size 330 x 300 x 1.8mm:- Rower Seat HDPE / PPCP Plastic:- Closing caps, Base Cover. MSbright material:- Pins made of Dia.17mm. Bearings:- Permanent lubricated bearings “6203” of reputed brand are used.Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. Circlips:- Thecirclips are used for locking is made up of A16. Handle grips:- Handle grips are of high quality rubber material. Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble orBerger with 60 to 70 micron thickness with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 6 THAICHI SPINNER TWO WHEELER-equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore sizei.e. Internal Diameter of pipe in millimeters. 100mm NB:- Centre pipe. 80mm NB:- Foundation mainpipe. 32mm NB:- Handle frame, Seat frame, support. 25mm NB:- Connecting links, handle. MS Angle 23x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed . 7 STANDING SEATING TWISTER- 8 SEATED PULLER-Length:- 1650mm, Width:- 700mm, Height:- 1850mm, Safe Area:- 1.2 Mtr X 3.0 Mtr,Seated puller equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore sizei.e. Internal Diameter of pipe in millimeters. 100mm NB:- Centre pipe. 80mm NB:- Foundation mainpipe. 32mm NB:- Handle frame, Seat frame, support. 25mm NB:- Connecting links, handle. MS Angle 23x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. MSplate of 8mm:- Seated Puller Handle profile. Φ50mm seamless pipe:- Bushes. Φ60mm seamless pipe:-Bushes. MS sheet of size 330 x 300 x 1.8mm:- Seat and Backrest. HDPE / PPCP Plastic:- Closing caps,Base Cover. MS bright material:- Pins made of Dia.17mm. Bearings:- Permanent lubricated bearings“6203” of reputed brand are used. Nut & Bolts:- High tensile steel with galvanized nut & bolts are used.Circlips:- The circlips are used for locking is made up of A16. Handle grips:- Handle grips are made up ofhigh quality rubber material. Powder coating:- The powder coating done with Pure polyster powder ofAckzonoble or Berger with 60 to 70 micron thickness with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 9 SKY WALKER DOUBLE-Length:- 1700mm, Width:- 600mm, Height:- 1650mm, Safe Area:-2.7 Mtr. X 1.6 Mtr. Sky Walker equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. 80mm NB:- Prime stand duly bend, foundation main pipe. 32mm NB:- Handle frame, support. 25mm NB:- Handle grip duly bend. MS pipe of Dia.100 x 5mm:- Sky walker I-part. MS pipe 48 x 48 x 2.8mm:- Pedal link. MS flat of 38 x 9mm:- For pedal support. MS flat of 48 x 4mm:- For pedal assembly, support. MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. Φ50mm seamless pipe:- Bushes. Φ60mm seamless pipe:- Bushes. MS sheet of size 245 x 113 x 2.8mm:- Footrest support. HDPE / PPCP Plastic:- Footrest, Closing caps. MS bright material:- Pins made of Dia.25mm. Bearings:- Permanent lubricated bearings “6205” of reputed brand are used. Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. Circlips:- The circlips are used for locking is made up of A24. Handle grips:- Handle grips are of high quality rubber material. Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thicknesswith full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed . 10 ABDORMINAL BOARD DOUBLE-Length:- 1700mm, Width:- 1350mm, Height:- 900mm, Safe Area:-2.5 Mtr X 1.6 Mtr, Sit Up Board equipment made up of “B” class GI pipe of different NB. NBstands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. 100mm NB:- Centre column. 80mm NB:- Foundation main pipe. 50mm NB:- Footrest, Sit up board support. 32mm NB:- Handle frame, Seat frame, support. 25mm NB:- Sit up board support frame, Connecting links, handle. MS pipe of Dia.125 X 3mm:- For prime stand sleeve. MS Angle 23 x 23 x1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. MS plate of 8mm:- Sit up board profile. FRP material:- Sit up board. HDPE / PPCP Plastic:- Closing caps, Base Cover. Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 11 BENCH WITH FIXED WEIGHT-product dimensions: - 1200mm (Length) x 1200mm (Width) x1750 mm(Height). safe workout area: - 2500mm (Length) x2000mm (Width). Bench with fixed weight lift equipment made up of “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. InternalDiameter of pipe in millimeters. Main frame:- Dia. 50 mm NB “B” class GI pipe duly bend. Bench frame:-38x18mm MS pipes are used. Handle Bar:- Dia. 25mm MS Solid bright bar is used. Weight plate:-Weight plates are used for weight lifting. The powder coating done with Pure Polyester powders f r omA c k z o n o b l e o r B e r g e r P a i n t s with 60 to 70 micron thickness with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 12 AIR WALKER-Pipe make:- JINDAL / TATA,Combination equipment made up of “B” class GI pipe ofdifferent NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters.100mm NB:-Main frame. 80mm NB:- Standing Twister support. 32mm NB:- Air Walker pedal, Leg press seat,Standing Twister base, support. 25mm NB:- Leg press Footrest support, Air Walker handle, StandingTwister handle.C channel of 38 x 73 x 4.5mm:- Bottom support frame.MS plate of 8mm:- Leg pressprofile, Air walker pedal L-Bend. Φ60mm seamless pipe:- Bushes. Φ70mm seamless pipe:- Bushes. MSsheet of size 330 x 300 x 1.8mm:- Seat and Backrest. MS plate of 245 x 113 x 2.8mm:- Footrest support.MS Round plate of Φ298 x 9mm:- Standing Twister plate. HDPE / PPCP Plastic:- Closing caps, Leg Pressfootrest. MS bright material:- Pins made of Φ 35mm, Φ 25mm. Bearings:- Permanent lubricatedbearings “6007”, “6205” of reputed brand are used. Bearings End cap:- Made up from Nylon material.Stopper:- Stopper (Bushes) used are made from Poly Urethin material of Φ50mm. Nut & Bolts:- Hightensile steel with galvanised nut & bolts are used. Circlips:- The circlips are used for locking is made upof A34, A24 & A16. Powder coating:- The powder coating done with Pure polyster powder ofAckzonoble or Berger with 60 to 70 micron thickness.with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 13 KNEE HIP RISER- Length:- 645mm, Width:- 630mm, Height:- 2000mm, Safe Area:- 3.0 Mtr X 1.6 Mtr, Multifunctional Trainer equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. 80mm NB:- Main frame, Foundation centre pipe. 25mm NB:- Handle frame, Back rest. CRC pipe of 78 x 38 x 1.8mm:- Handle support pipe. MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. MS plate of 8mm:- Chest press profile, Seated Puller Handle profile. Φ60mm Solid pipe:- Bushes. HDPE / LLDPE Plastic:- Closing caps, Base Cover. MS bright material:- Pins made of Dia.25mm. Handle grips:- Handle grips are made up of high quality rubber material. Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness.with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed 14 LEG EXTENSIONER- 15 STANDING PULLER-Safe Area:- 1.5 Mtr X 1.5 Mtr, equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. 80mm NB:- Base link, Foundation main pipe. 50mm NB:- MS Angle 23 x 23 x1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. Φ50mm seamless pipe:- Bushes. MS sheet of size 330 x 300 x1.8mm:- Closing caps, Base Cover. MS bright material:- Pins made of Dia.17mm. Bearings:- Permanent lubricated bearings “6203” of reputed brand are used. Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. Circlips:- The circlips are used for locking is made up of A16. Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness.with full foundation of PCC or RCC as required complete to meet with the complete replacement warrenty of first 05 years and apaid rectification guarenty of another 5 yearsfollowed
