|
| 1 | Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm eachcomplete all as specified and as directed. |
| 3 | Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 4 | Dismantling of stone slabs and tileslaid dry or laid dry and pointed of any description or thickness in floors,aprons etc complete all as specified and as directed. |
| 5 | Dimantling of wall and ceiling boards(fibre pulp, insulation, etc) or insulation board/slab/ blnkets, any thickness,including cover fillets complete all as specified and as directed. |
| 6 | M&L 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair complete all as specified and as directed. |
| 7 | S&Fpowder coated aluminium anodised door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etccomplete all as specified and as directed. |
| 8 | M&L for powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 9 | S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thickMS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fastsetc all as shown on Drg No CEPZ/CE -TD/031/2013 SHEET NO 142 including one coat of red oxide zinc primer,complete all as specified and as directed. |
| 10 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and as directed. |
| 11 | S&F factory made solid PVC moulded Door shutter,28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood Free EPS complete all as specified and as directed. |
| 12 | S&F Butt hinges, medium weight, cold rolled mild steel, 75 mm size,complete all as specified and as directed. |
| 13 | S&F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 150mm longcomplete all as specified and as directed. |
| 14 | S&F Aluminium handle cast type anodized of size 150mmcomplete all as specified and as directed. |
| 15 | S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. |
| 16 | S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane,complete all as specified and as directed. |
| 17 | S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each complete all as specified and as directed. |
| 18 | M&L Cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc.; and cutting chases forconcealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete, all as specified and as directed. |
| 19 | Taking up or down 15 mm bore steel tubing and connections including cleaning, threadingfor removal to store,complete all as specified and as directed. |
| 20 | S&F Galvanized steel water tubing, 15 mm bore, medium grade, with all fittings , fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. |
| 21 | Taking up or down 20 mm bore steel tubing and connections including cleaning, threadingfor removal to store,complete all as specified and as directed. |
| 22 | S&F Galvanized steel water tubing, 20 mm bore, medium grade, with all fittings , fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. |
| 23 | Dismantling water tanks of any description, exc 500 & nexc 1000 litre capacityand removing from site. complete all as specified and as directed. |
| 24 | S&F Rotational moulded polyethylenewater storage tanks. (cylindricalvertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity , complete all as specified and as directed. |
| 25 | Supply and fixball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete of 20 mm bore diacomplete all as specified and as directed. |
| 26 | S&F Bib tap, 15mm bore long body, chromium plated, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs,complete all as specified and as directed. |
| 27 | S&F Stop/Angle valves, cast copper alloy, 15mm bore (concealed type), screweddown, high pressure with capstan head, both ends screwed for iron pipe orfor union etc., fixed in repairs,complete all as specified and as directed. |
| 28 | S&F Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs,complete all as specified and as directed. |
| 29 | Supply and fix 600x450x6mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup washers,fixed in repair complete all as specified and as directed. |
| 30 | Supply & fixed , Vitreous china squatting pan of pattern, long pan, \"Orissa pattern\", size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concretefixed in repair complete all as specified and as directed. |
| 31 | Supply & fixed , Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging devicefixed in repair complete all as specified and as directed. |
| 32 | Supply and fix Vitreous china, wash hand basin, flat back, white of size 580mmx450mmwhite flat back including cast iron brackets, cutting for and pinning the ends of brackets or erecting on stand incl 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated and 32mm bore brass chromium plated waste coupling with long screed shank and fly nuts PVC flexible waste pipe ofbore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, fixed in repair complete all as specified and as directed. |
| 33 | Supply and fixPVC valve less, syphonic action type flushing cistern,10 ltrs capacitylow level, white, with inlet ball valve, float and handle including PVC connection 15 mm size with PTMT nuts of length 600 mm longfixed in repaircomplete all as specified and as directed. |
| 34 | S&FBrass chromium plated tubular towel rail 20mm dia, D type 60cm long between flages complete all as specified and as directed. |
| 35 | S&F liquid soap contrainer of PTMT fixed with and including chromium olated brass screws and wooden/plasting cleats (minimum weight 105gms) complete all as specified and as directed. |
| 36 | Demolition of brick work masonry built in cementmortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articlescomplete all as specified and as directed. |
| 37 | M&L Brick work with sub class ‘B’bricks, (old size) straight or curved on plan exceeding 6m mean radius built in in CM 1:6, but exceptbrickscomplete all as specified and as directed. |
| 38 | Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 but except brick i.e. using serviceable bricks obtained from Srl item No. 37 here-in-before,complete all as specified and as directed. |
| 39 | M&L Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed inneat cement slurry including 15mm thick screed bed in Cement Mortar 1:4 and pointed in coloured cement match the colour of tilecomplete all as specified and as directed. |
| 40 | M&L vetrified tile 7 to 8mm thick area of each tile exc 0.18 sqm but not exzc 0.38 sqm on vertical surfaces such as skirting / dado etc. bedded & jointed in neat cement slurry over and including 10mm thick backing coatin CM 1:4 and pointed in coloured cement to match the colour of tile,complete all as specified and as directed. |
| 41 | M&L Non skid/ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4,complete all as specified and as directed. |
| 42 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and as directed. |
| 43 | M&L Glazedcoloured ceramic tiles on vertical surfaces of size 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and as directed. |
| 44 | M&L 75mm thick,plain cement concrete1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishingsurface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and as directed.Note : The concrete shall be laid at a stretch not exceeding3.0 m in length and joint shall be made at every turning / corners, complete all as specified and directed. |
| 45 | M&L Hardcore of guage nexc 63mmdeposited, spread and levelled in layers not exc 15cm thick, wateredand rammed to a true surface complete all as specified and as directed. |
| 46 | M&L 75 mm thick plain cement concrete1:2:4, type B2, using 40 mm graded stone aggregates as in floorssurfaces finished even and smooth with out using extra cement complete all as specified and as directed. |
| 47 | M&L Rendering 10 mm thick in cement mortar 1: 6 othrthan faces ofbrick work or concrete surfaces, finished even and smooth with out using extra cement,complete all as specified and as directed. |
| 48 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in Cement mortar 1:4,finished even and smooth without using extra cementcomplete all as specified and as directed.. |
| 49 | Preparation of new plaster surfaces of wall applying two coats of oil bound emulsion over plastered surfaces of walls includingincluding a coat of brila wall putty of 2-3mm thickness complete all as specified and as directed. |
| 50 | Complete removal of existing treatmentof any description by washing, rubbing down and stopping of distempered/painted wall surfacesand applying two coats of oil bound emulsion over a one coat ofwall putty, complete all as specified and as directed. |
| 51 | M&L for applying finishing wall with Appex premium acrylic smooth exterior paint with silicon additives of required shade two or more coats applyied @ 1.43 Ltr/10 Sqm over including priming coat of exterior primer applied @ 2.20Kg/10sqmcomplete all as specified and as directed. |
| 52 | Complete removal of existing treatment of wall and applying finishing wall with Appex premium acrylic smooth exterior paint with silicon additives of required shade two or more coats applying @ 1.43 Ltr/10 Sqm over including priming coat of exterior primer applied @ 2.20Kg/10sqmcomplete all as specified and as directed. |
| 53 | Preparation of new or untreated steel surface of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and as directed. |
| 54 | S&F Stainless steel 25mmmm dia curtain rods with fixing stainless steel brackets fixed in repairscomplete all as specified and as directed. |
| 55 | S&F Stainless steelcurtain rod fancy type globe of both side of curtain rod .Sample kept in office of the GEcomplete all as specified and as directed. |
| 56 | Supply and fix in repair PVC (SWR)floor trap75 mm, with steelgrating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)complete all as specified and as directed. |
| 57 | Supply and fixed 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls fixed in repaircomplete all as specified and as directed. |
| 58 | Supply and fix in repairs 110 mm bore PVC (SWR) bend, any radiusfixed in repair complete all as specified and as directed. |
| 59 | Dismantling of AC sheet (corrugated, semicorrugated etc) in roof covering including ridges fixed in repair complete all as specified and as directed. |
| 60 | Dismantling timber scantlings 40 sq.cm and over in section, in any position frame workcomplete all as specified and as directed. |
| 61 | S&F Pre- painted galvatume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 62 | S&F Pre-painted galvaiume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 63 | M&L Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe410-W(Grade E-250 Qualty-A) complete all as specified and as directed. |
| 64 | S&F Rolled Mild steel Plates (plain or Chequred) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe410-W(Grade E-250 Qualty-A)complete all as specified and as directed. |
| 65 | S&F Suspended false ceiling system using 4mm thick high pressure steam cured fibre cement pre-primed textured varient E-board (classic), ISI marked, conforming to IS:14982-2000 over and including GI snap grid frame workfor false ceiling, grid size605 x 605 mm with GI angle of size 24x24mm, main runner ‘T’ of size 24x38mm, secondary runner ‘T’ of size 24x28mm with 6mm GI wire with butterfly clips as hangers for leveling, fastners, supports, plugs to walls/joists etc all as per manufacturer’s Instructions,including making holes, cutting chasis and making good existing walls in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and as directed.Note : All steel members shall be hot dipped galvanised with zinc coating not less than 120 gm/sqm. |
| 66 | Cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and as directed. |
| 67 | M&L PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified and as directed. |
| 68 | M&L PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complete all as specified and as directed. |
| 69 | M&L Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and as directed. |
| 70 | M&L Machine cut Kota stone slab flooring not less than 20-25mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified and as directed. |
| 71 | Providing and laying 80mm thick factory made chamfered edge cement conrete paver block of M-30 grade with approved colour,design & pattern as in footpath, parks,lawns, driver ways or light traffic parkingetc, of required strength, thickness & size /shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick campacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.(Note:- 50mm thick campacted coarse sand Paid separately) |
| 72 | M&L for Sand filling under floors or cushioning to paver block including watering and consolidation complete all as specified and as directed. |
| 73 | M&L PCC (1:4:8), Type D-2 using 40mm graded stone aggregate as in fdn, filling and mass concrete complete all as specified and as directed. |
| 74 | Excavation in trenches n.exc. 1.50 m wideand n exc 1.5 mtr depth and taking out in any type of soilcomplete all as specified and as directed. |
| 75 | M&L Cement Concrete 1:3:6 type C-2 bed drain pipes incl packing under and hanuching against the sides of pipes after they laid and tested (150mm bore pipe)complete all as specified and as directed. |
| 76 | M&L Reinforced cement concrete pipes class NP3, 150mm borelaid in trenches and jointed complete with collar in cement complete all as specified and as directed. |
| 77 | M&L Reinforced cement concrete pipes class NP3, 300mm borelaid in trenches and jointed complete with collar in cement complete all as specified and as directed. |
| 78 | Removing excavated material n exc 50m and depositing where directed at level not exc 1.5m above the starting pointcomplete all as specified and as directed. |
| 79 | Returning filling incl spreading levelling watering and well ramming in layers not exc 25 cmcomplete all as specified and as directed. |
| 80 | M&L Cutting into existing manholes for connecting new drains , making good to pipe and retendering, cutting out existing benching for and forming branch channel (½ round or ¾ section ) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm, complete all as specified and as directed. |
| 81 | M&L Soakage wells excavation, in type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25concrete including intercepting chamber ad screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC Cover, interconnecting pipes of ECC/DWC Complete filled with bricks bats of size (3.0m diax3.0m effective depth)complete all as shown in drawing No CEPZ/C-TD/013/13 specified and as directed. |
| 82 | Cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and as directed. |
| 83 | M&L PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified and as directed. |
| 84 | M&L PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complete all as specified and as directed. |
| 85 | M&L Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and as directed. |
| 86 | Takingout carefully copper/aluminium point wiring,Light,fan,socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and as directed. |
| 87 | Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed. |
| 88 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and as directed. |
| 89 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and includingrigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and includingpressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed. |
| 90 | All as per Srl item No 89 above but for one fan point controlled by one piano switch complete all as specified and as directed. |
| 91 | All as per Srl item No 89 hereinbefore but for one 3 pin socket outlet 5 Amp Same board. |
| 92 | All as per Srl item No 89 hereinbefore but for one 3 pin socket outlet 5 Amp independent. |
| 93 | All as per Srl Item no 89 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed. |
| 94 | Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and as directed. |
| 95 | Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and as directed. |
| 96 | Supply and fixmodular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed. |
| 97 | Supply and fixmodular type socket 5 pin, 6 A/16 Amps2 module complete all as specified and as directed. |
| 98 | Supply and fixof Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. |
| 99 | Supply and fixLamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and as directed. |
| 100 | S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and as directed. |
| 101 | Supply and fixof Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extrudedLED batten complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed. |
| 102 | Supply and fix factory made epoxy powder coated Distribution board VTPN 4 ways ,415 Volts with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and as directed. |
| 103 | Supply and fix in replacement of Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 25 KA 0f size 63 amp complete all as specified and as directed. |
| 104 | Supply and fixfactory made epoxy powder coated Distribution board SPN 8 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and as directed. |
| 105 | Supply and fixof MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified and as directed. |
| 106 | Supply and fixof MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all as specified and as directed. |
| 107 | Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed. |
| 108 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame andlouvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directedcomplete all as specified and as directed. |
| 109 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame andlouvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site complete all as specified and as directed. |
| 110 | Taking down old us ceiling fan of any size and refixing the same after repair as per direction complete all as specified and as directed. |
| 111 | Supply and fixingfully diffused recessed mounted luminaire 2\"x2\" LED 36Watt suitable for POP/Gypsum false ceiling complete with hosing with all accessories pre wired and making connection with threecore copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fittingcomplete all as specified and as directed. |
| 112 | Supply and fix Integral LED security light luminaire 35W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens & toughned glass IP-66suitable for mounting existingbracket of size 32/40mm dia G I pipe, fixing clamps ,bolts, nuts of suitable size as required at site complete all as specified and as directed. |
| 113 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire4 mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and alsoremoval of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingallcomplete all as specified and as directed. |
| 114 | Supplying and laying of CPVC pipes of dia 50 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and as directed. |
| 115 | Supplying and laying of CPVC pipes of dia 25 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and as directed. |
| 116 | Supplying and laying of CPVC pipes of dia 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and as directed. |
| 117 | S&F 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixedcomplete all as specified and as directed. |
| 118 | S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixedcomplete all as specified and as directed. |
| 119 | Cutting existing 80/100/150 mm GI pipe and inserting GI Tee of size 100x100x50 mm for tapping including necessary earth work and making flange for connection of new 50 mm of GI pipe including complete all as specified and as directed. |
| 120 | Excavation in trenches, n. exc1.5 m wide and n. exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sq m on plan and n. exc1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.Note : All excavation for taking out and re-laying of pipes shall be carried out mannualy and paid under this relevent item. |
| 121 | Taking Out old U/S XLPE 1100 volts grade of size 25 sqmm 3.5 core complete all as specified and as directed. |
| 122 | Taking Out old U/S XLPE 1100 volts grade of size 16 sqmm 2.0 core complete all as specified and as directed. |
| 123 | Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2.0 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and as directed. |
| 124 | Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and as directed. |
| 125 | Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified and as directed. |
| 126 | S & F Steel pipe glavanized lightgrade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete all as specified and as directed. |
| 127 | M&L for Cutting/Boringof road/Hard standing to a size of 30 cm in width and not exceeding 90 cm in depth for laying of protection pipe/water line/Cableincluding returning filling, Including spreadingand providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and as directed. |
| 128 | Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brickcomplete all as specified and as directed. |
