Tender For Addition / Alteration To P-11 Bldg At Cgra Meenambakkam Chennai; 2 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed 3 Material and labour for rendering 15mm thick in Cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement etc., complete all as specified and as directed. 4 Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed.Note: WPC will be measured and paid separately. 5 Material and labour for rendering 5mm thick in Cement mortar 1:3 on fair faces of concrete surfaces in ceilings, Chajja surfaces and finished even and smooth without using extra cement complete all as specified and as directed. 6 Material and labour preparation of newly plasterredsurfaces of walls and applying threecoats of white washcomplete all as specified and as directed. 7 Material and labour for preparation of newly plastered surface of walls including pilasters and cornices etc., and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of wall care putty 3mm thick all as per manufacturers specification etc., complete all as specified and as directed. 8 Material and labour for preparation of newly plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. 9 Material and labour for preparation of newly plasterredsurfaces of ceilings and applying threecoats of white wash complete all as specified and as directed. 10 M&L for preparation of old treated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed. 11 Material and labour for Complete removal of old plastered surfces of walls, pilasters and cornices etc., including preparation of surfaces and applying Distemper two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of wall care putty 3mm thick all as per manufacturers specification etc., complete all as specified and as directed. 12 Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed. 13 Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.18Sqm but not exceeding 0.38 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to matchall as specified and as directed. 14 Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or 350mm x 250mmor of size matching to floor tile as approved by GE,fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed. 15 Material and labour for Chequered cement concrete tiles (Ultra) of any size/shape, 22-25mm thick,set and jointed in neat cement slurry in floors and pointed with grey cement and pigments match to tiles laid over and including 15mm thick screed bed in cement mortar 1:6 completeall as specified and as directed. 16 Material and labour for Marble work 18 to 20mm thick with Green Marble stone slab, machine cut (table rubbed and pre polished) in steps, jambs, pillars, window cills, cooking platforms and the like (in single piece) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade ofmarble stone slab over a screed bed/backing coat of 15mm thick in cement mortar 1:4 including nosing half round bull nose finish at edges and machine polishing to edge to give high gloss finish and cutting of three numbers of grooves in steps etc., complete all as specified and as directed. 17 Material and labour for Marble work 18 to 20mm thick withMakrana white stone slab,machine cut (table rubbed and pre polished) in steps, jambs, pillars, window cills, cooking platforms and the like (in single piece) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade ofmarble stone slab over a screed bed/backing coat of 15mm thick in cement mortar 1:4 including nosing half round bull nose finish at edges and machine polishing to edge to give high gloss finish and cutting of three numbers of grooves in steps etc., complete all as specified and as directed. 18 Material and Labour for Removing exisiting Stainless Steel post / railing 900mm height,cleaning the stainless steel surfaces to remove any debris or contaminants and polishing to stainless steel with specialised compounds like Enkays Green compound using buffing wheel to achieve a bright finish and refixing in position with necessary fixing arrangements like clamps, bolts, nuts grouting etc., complete all as specified and as directed.Note: Each 900m height Stainless steel pipe/post shall be measured as one unit. 19 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc., complete all as specified and as directed. 20 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm not exc 4sqm each along with fittings including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. 21 Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each with fittings complete all as specified and directed. 22 Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed. 23 Material and labour for Providing and fixing factory made uPVCwhite colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 ± 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 Nos., sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 5mm thick plain sheet glass including necessary accessories complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 5mm thick sheet glass, wiremesh and all other connected accessories. [b] Net Opening will be measured for payment purpose. 24 Supply, Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( ± 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 6.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 6.0mm thick sheet glass and all other connected accessories. [b] Net Opening will be measured for payment purpose. 25 Supply, Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profilewilh wall thickness of 2.3mm ( ± 0.2mm). Door profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Doortransmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 6.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: The unit rate quoted by contractor shall include the cost of 6.0mm thick sheet glass and all other connected accessories. Net Opening will be measured lor payment purpose. 26 Supply, Providing and fixing factory made uPVC white colour casement (Openable) ventilators made of extruded profiles with wall thickness of 2.3mm ( ± 0.2mm). Window/ventilator profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 5.0mm thick sheet glass and all other connected accessories. [b] Net Opening will be measured for payment purpose. 27 Supply, fabricate and fix 5mm thick toughened glass (Reflective or tinted glass) structural glazing fixedto external wall with uPVC frame made out of of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window/ventilator/Structural glazing frame profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated) and 5.0mm thick glazing with selected quality glass complete all as specified and as directed.Note: [a] The unit rate quoted by contractor shall include the cost of 5.0mm thick sheet glass and all other connected accessories. [b] Net Opening will be measured for payment purpose. 28 Material and labour for preparation of old painted steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. 29 Taking down steel tubing and connections includingremoving from site of 15mm bore pipe complete all as specified and as directed. 30 Taking down steel tubing and connections includingremoving from site of 20mm bore pipe complete all as specified and as directed. 31 Supply and Fix20mm bore (UPVC) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed with solvents as per manufacturers recommendations fixed on walls, ceiling or in floors including testing etc., complete all as specified and as directed. 32 Supply and Fix25mm bore (UPVC) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed with solvents as per manufacturers recommendations fixed on walls, ceiling or in floors including testing etc., complete all as specified and as directed. 33 Cuttings chases for concealed water tubing or concealed conduit, cutting n.exc 10 cms girth and making good in CM ( 1:3) in brick walls complete all as specified and as directed. 34 Supply and Fix Gun metal globe or gate valve of size 25mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, unionetc., complete all as specified and as directed 35 Supply and Fix brass chromium plated waste coupling 32mm bore for WHB complete all as specified and as directed. 36 Supply and Fix PVC waste pipe/Flush pipe 32 mm dia, 600mm long for urinal/WHB with fitting etc.,complete all as specified and as directed. 37 Supply and fix in repair 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. 38 Supply and fix in repair Brass chromium plated shower rose of size 125mm with swivel joints fixing to 15mm dia steel pipe or union complete all as specified and as directed. 39 .Supply and Fix in repair 15mm stop cock/angle cock,cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type) complete all as specified and as directed. 40 Supply and Fix in repair 15mm bore Bib tap of cast copper alloy, fancy type, Chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 41 Supply and Fix PVC Connection pipe, 600mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed. 42 Supply and Fix in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube 8mm dia (PVC chromium plated) and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. 43 Supply and fix in repairs, fancy type looking mirror (600X750) with beveled edge mirror of selected quality glass, 6.0mm thick, mounted oncommercial plywood/MDF board and fixed with spacers to wall with wooden plugs and chromium plated brass screws etc., complete all as specified and as directed. 44 Supply and Fix in repairs of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide, 60cm long with chromium plated bracket guard and railing etc., complete all as specified and as directed. 45 Supply and Fix Soap dish brass chromium plated fixed with and including chromium plated brass screws with rawl plugs complete all as specified and as directed . 46 Supply and Fix Tubular towel rail, Brass chromium plated, 20mm dia,60cm long between flanges fixed with and including chromium plated brass screws with rawl plugs complete all as specified and as directed . 47 Supply and fix in repairs Ball brass valves of size 20mm dia, high pressure, with polythene float and fly nut complete and reducer of 25 to 20mm if required, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. 48 Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conformingto IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed. 49 Supply and fix 100mm bore dia cast iron floor trap with CP grating, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 complete all as specified and directed 50 Supply and Fix in repair stainless steel, Chromium plated grating with doom 100/110 mm dia without waste hole or with waste hole (to insert waste pipe from WHB /Sink) etc., complete all as specified and as directed. 51 Supply and Fix in repairs110mm bore UPVC (SWR) pipe of pressure not less than 6 Kg/Sqcm in single socketed, in any length with rubber ring joints,fixed to wall,ceiling and foors including distance pieces and stack clamp with nuts & bolts complete all as specified and directed. 52 Supply and Fix UPVC (SWR) bends any radius, 110mm bore complete all as specified and as directed 53 Supply and fix in repair vitreous china counter wash hand basin snow white of miniumum size560mm x 470mm (or)next higher size fixed in and including Granite slab of 20mm thick telephone black, machine polished in single piece of minimum size 900 mmx 600mm with necessary cutting and bevelling of exposed edges fixed with M-seal or Araldite to make leak proof joint and fixing of connected accessories of chromium plated brass coupling, 32mm bore Cast copper alloychromium plated Bottle traps, Cast copper alloy chromium plated brass centre hole mixer, PVC braided connection (two numbers), 15mm bore Cast copper alloyCP angular stop cock (valve) etc., complete all as specified and as directed.Note : [a]Counter wash hand basin shall be of Cat Part No. 1005A of Cera or equivalent model of other make specified in Particular specifications.[b]The unit rate quoted shall be deemed to include the cost of counter top WHB, 20mm thick telephone black machine polished granite slab, 32mm bore CP bottle trap, CP brass centre hole mixer, PVC braided connection - 2 Nos, 15mm CP angular stop cock and other fixing accessories. 54 Material and Labour for Providing precast cement concrete of 1:2:4 Type B0 using 12.5mm graded stone aggregate as in louvers and jallies 25mm thick (measured solid) and set in cement mortor 1:6including all mouldings but excluding frames complete all asspecifed and as directed.Note: Reinforcement bars shall be measured and paid separately. 55 Taking down existing cement plaster of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even (average 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate shall be provided wherever required) followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed including applying two coats of cement base paint over a coat of primer (after curing of specified time and drying the surfacesas required)over newly plastered surface including preparation of surfaces etc., complete all as specified and as directed. 56 Materail and labour for 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)complete all as specified and as directed. 57 Materail and labour for 75mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4)complete all as specified and as directed. 58 Materail and labour for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as completed as Speciifed and directed . 59 Materail and labour for 5mm thick Solid PVC wall lining consisting of Single side prelam PVC sheet of PVC sheet color inclusive of Solvent Cement without relevant and fixing at site on PVC frame as completed all as specified and directed. 60 Supply and fix Vitreous china wash down water closet pan, pedestal pattern, floor mounted, colour white with all fittings including fixing bolts, flush pipe, Plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device (excluding flushing cistern) and P/S trap including connections to drain(or outgoing pipe)andtaking down existing water closet etc., complete all as specified and as directed. 61 Supply and fix in repairsPVC low level flushing cistern, white,10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle,bracket, 32mm bore steel chromium plated flush pipe etcand connecting to WC and water pipe lines etc.,complete all as specified and as directed. 62 Supply and fix in repairs vitreous China urinal, half stalltype complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed. 63 Materail and labour for Wooden flooring for badminton court/ Squash court with Kiln seasoned First class Teak Wood board treated with special anti-termite and water resistant lacquer, finished with 21 mm thick, 55 to 90 mm width and in random length in tongue and groove shape and the edges of the boards shall have a finger lock grove and the bottom side with air pass groove fixed overframe work made of commercial quality Fir/Spruce/ Pine wood runners of 70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10 mm thick EPDM rubber air cushioning pads by nails through the two wings at 350 mm c/c and the floor shall be machine sanded with floor sander machine and finished with Non-skid, DIN-certified Polyurethane Lacquer and marking the Game line in required colours before applying the finish coat etc., conforming to the specification for sports infrastructure of Sports Authority of India (SAI) and Badminton World Federation (BWF) standards complete all as per manufacturer instruction and as directed. 64 Materail and labour for preparation ofexisting Wooden flooring of Badminton courtby machine sanded with floor sander machine and polishing with Non-skid, DIN-certified Polyurethane Lacquer and remarking the Game line in required colours before applying the finish coat etc., conforming to the specification for sports Infrastructure of Sports Authority of India (SAI) and Badminton World Federation (BWF) standards complete all as per manufacturer instruction and as directed. 65 Supply and fix 18mm thick water proof, termite proof , borer proof and corrosion free PVC sheets of600 density,prelaminated on both sides of board as inCabinet unit and over head unit (Modular type) with approvedshade and fixed with all fittings and fixtures such aslock, knobs, soft closing hinges, telescopic hinges etc.,as per manufacturers instructions complete all as specified and as directed. Note :(i) If any damages caused to the existing structure shall be made good without any cost and the rate quoted by the bidder shall be inclusive of the above provisions . 66 E/M ITEMS 67 Material and labour for point wiring complete with two runs of 1.5Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS - 694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/floor and fixed on ceiling/ roof/ truss/ columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti-corrosive paint for housing the switches, sockets, fan regulator etc and covered with 3 mm thickplastic laminated sheet cover with cadmium plated screw, cup washer etc., complete concealed in walls and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and as directed for One light point controlled by one switch. Note :(a) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (b)The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate. 68 Material and labour for submain wiring complete with two runs of 4.00 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked of suitable size not less than 20mm external dia fixed on wall/ floor/ ceiling/roof mounting system along with conduit fittings and accessories with one run of 4.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 4.00 Sqmm multistranded cable andone run of PVC conduit shall be considered as one unit length. 69 Material and labour for submain wiring complete with two runs of 2.50 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked of suitable size not less than 20mm external dia fixed on wall/ floor/ ceiling/roof mounting system along with conduit fittings and accessories with one run of 2.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 2.50 Sqmm multistranded cable andone run of PVC conduit shall be considered as one unit length. 70 Material and labour for submain wiring complete with two runs of 1.50 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked of suitable size not less than 20mm external dia fixed on wall/ floor/ ceiling/roof mounting system along with conduit fittings and accessories with one run of 1.50 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring any type complete all as specified and as directed. Note: Three runs of 1.50 Sqmm multistranded cable andone run of PVC conduit shall be considered as one unit length. 71 Supply and Fix Switch piano, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and directed. 72 Supply and Fix Switch socket combination, 2 in 1, 3/5 pin, 5 Amps Flush type 240Volts complete all as specified and directed. 73 Supply and Fix Switch socketcombination, 2 in 1, 3 pin, 5/15 Amps Flush type, universal socket 240Volts complete all as specified and directed. 74 Supply and fix Ceiling rose, surface mount type, PVC/ Polycarbonate, with face bakelite 25 x 50mm three terminals, 230 Volt, AC Single phasecomplete all as specified and as directed. 75 Supply and fixingin replacementof Factory made sheet metal enclosure forTPN MCBDBs double door (Fixed flush to the wall), TPN, 415 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed. 76 Suppy and fix MCCB 100 Amps, 415 Volts, 36 kA braking capacity with Thermal Magnetic protectionall as per Cat No.4200 95 of Legrand or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed. 77 Supply and fix of MCB TP (Triple Pole) 63 Amps, 415 Volt, , breaking capacity 16 KA C series complete all as specified and as directed. 78 Supply and fix in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , including taking out old DBs any type & size and making good the disturbed surfaces by using plaster/ PCC/ cement work & match with exiting surface etc , complete all as specified and directed. 79 Supply, fix, test and commissioning of 200Watts LED Flood Light luminaires, energy saving, environmental friendly, long life, pressure die cast aluminium housing IP66 protection Flood light with PC diffused lens enclosure over LED for glare free light suitable for sports court and general purpose lighting operation on AC single phase 220-240 Volt, 50 Hz supplyall as per Cat No.JETAADORNNXTFLS200WLED757SSYMTOTGV2 of Havells or equivalent of other specified makes with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size and taking down the old fitting complete all as specified and as directed.Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details. 80 Supply and fix 4 feet 1 x 20 Watts LED light fitting, Basic all purpose surface and wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver all as per Cat No.ENDURALINEARNEO BS20WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details. 81 Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 32 x 6mm means of bolts, nuts washers, check nuts as shown in electrical plate No. 3 connected to earthing test points including excavation and earth work PCC 1:2:4 type B-1(using 20mm graded aggregate) in PCC chamber RCC cover 50mm thick in RCC 1:2:4 type B-1 ( 20mm graded aggregate) with 8 mm TMT bars at 15 cm c/c in both ways with hooks, funnels with 20 mm dia GIwatering pipe medium grade, wire mesh and funnel 15 mm diaGI protection pipelight grade and testing on completion including taking outold u/s earthing accessories complete all as specified and as directed. 82 Earth continuity conductor or main earthing lead fixed to wall or recess or chasses or buried in groung or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron wire including taking down old unserviceable one complete all as specified anddirected 83 Supply and Fix MCB Single Pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including removing of old unserceable MCBcomplete all as specified and directed. 84 Supply and Fix MCBSPN, 32 Amps 10 KA, 240 V including removing of old unserceable MCBcomplete all as specified and directed. 85 Supply, fix, test and commissioning of Exhaust fan of size 450mm sweep, steel body, copper winding, 230V AC, single phase complete setwith metal blades, frames and louvers, connecting up including provn of threecore flexible copper wire of size 23/0.0076 from ceiling rose to exhaustfanincluding taking down old unserviceable exhaust fan and to be deposited at MES store etc., complete all as specified and as directed.
