Tender For Construction Of Community Hall At Siviyampalayam Ar Colony H/O Siviyampalayam. In Namakkal Block Ofnamakkal Districtundermlacds 2025-26 Nkl-1., namakkal-Tamil Nadu

Tender For Construction Of Community Hall At Siviyampalayam Ar Colony H/O Siviyampalayam. In Namakkal Block Ofnamakkal Districtundermlacds 2025-26 Nkl-1.; 1 Construction of Community Hall at Siviyampalayam AR Colony H/O Siviyampalayam 2 Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS20 B for foundation etc complete 3 Cement Concrete in 1 : 4 : 8 mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete 4 Collection and supply ofgraveland filling in to the basement including cost and conveyanceto the siteand all labour charges for filling as per standard speecifications 5 Brick Workin CM 1:5 mix using 2nd Class Bricks(9x41/2x3) 23x11.5x7.5cm including cost and conveyance of materials and labour chargesetc complete. - 100.00 Cft 6 Below GL 7 Above GL 8 Supplying and errecting shuttering including necessary support for plane surfaceincluding all R.C.C Works etc., Complete. 9 Grade beam to basement 10 Column and Sunshade 11 …Do.. For Slab and Beam 12 Sill Slab Sides 13 R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete 14 Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate.The binding wire shall be supplied by the Contractor. 15 Floor finish with granolethic in cement concrete 1:2:4 mix using 10-12mm chips including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete 16 Weathering course with brick jelly lime concrete in the proportion of 32:12.5 by volume including cost and conveyance of all and labour charges etc. complete. 17 Finishing the top of roof with one course of pressed tiles of size 20 X 20 X 2 mm laid in CM 1:3 12 mm thick mixes with W.P. compound laid 2 % weight of cement etc., complete. 18 Paving the floor with best quality Vetrified ( Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. 19 Supply of steel doors and windows including cost and convyance and all charges etc complete.etc complete 20 Rolling shuter 21 Window W (1.20x1.30m) 22 Door (1.00x2.10m) 23 Labour charges for fixing Doors alongwith frames in position etc., complete (finished work) as per serial no 114 and item no 19 24 Labour charges for fixing Windows and Ventilators alongwith frames in position etc., complete (finished work) as per serial no 115 and item no 20 25 Plastering with C. M 1:5 mix, 12 mm thick including cost and conveyance of all materials to site and labour charges etc complete. 26 Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.The Surface shall then be allowed to dry for atleast 48 hours.It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface.Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete].The Putty shoule be got approved by the Executive Engineer before use on work.. 27 Oil Distempering Two Coats overPlastering Surface including cost and conveyance of materials and labour chargesetc complete 28 EmulsionPainting two coats with approvedPaint over one coat of Primaring coat of Cement Paint over new cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete c 29 Painting twocoats with ready mixed paint for new iron work including cost of all materials to site and all labour charges etc complete 30 Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T WClamps, Plug, Shoes, bend, Screws, nails etc., complete 31 Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 23 32 Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 38 33 Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 64 34 Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class B ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69 35 Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD EarthingSD 155 36 Supply and fixing of 440W twin street light fluorescent fitting complete with copper choke and condensor with19mm dia GI pipe (Class B) with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse uniton MS plate with PVC unsheathed copper leads with MS clarnps and aluminium painting with fluorescent tubes. SD 94 37 Supply and fixing of 1200 mm ( 48) AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 107 38 Supply and fixing of fancy glass shade and 11W CFL for BH point . SD 80 39 Supply and fixing of 440W twin street light fluorescent fitting complete with copper choke and condensor with19mm dia GI pipe (Class B) with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse uniton MS plate with PVC unsheathed copper leads with MS clarnps and aluminium painting with fluorescent tubes. SD 94 40 GST Amount for providing Service to Government Contract Works for the above RENEWALWorks. { GST Amount is the Total GST Amount for overall quoted amountabove this row in column BB for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB