Tender For Special Repair/Annual Repair And Maintenance Of Punjab And Haryana High Court Building Under C-9 Sub Division, Chandigarh (Replacement Of Wooden Almirahs In The Oath Commisioner/Notary Room In The Premises Of The Honble Punjab And Haryna H, Chandigarh-Chandigarh

Special Repair/Annual Repair And Maintenance Of Punjab And Haryana High Court Building Under C-9 Sub Division, Chandigarh (Replacement Of Wooden Almirahs In The Oath Commisioner/Notary Room In The Premises Of The Honble Punjab And Haryna High Court,- 1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand andmanufacturerincluding applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) DSR 13.81.1 2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture,including applying additional coats wherever required, to achieve even shade and colour. One coat DSR 13.82.1 3 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work DSR 13.99.1 4 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm). DSR 13.112.2 5 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2 6 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.5.2 7 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1 8 French spirit polishing : Two or more coats on new works including a coat of wood filler DSR 13.68.1 9 Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI)non-decorative type,core of blockboardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1 10 Providingand fixingaluminiumdie cast body tubular typeuniversal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83 11 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm DSR 9.100.1 12 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 13 French spirit polishing : One or more coats on old work DSR 13.103.1 14 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. DSR8.6 15 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 13.80 16 Providing andfixing 1mm thick mica (Formica, Kit, Archid or tis equivalent) of approved shade and quality on commercial surface fixed in position by means of fevicol and nails etc. (As per sample approved by Honble Building Committee, Punjab and Haryana High Court, Chandigarh) complete in all respect to the entire satisfaction of Engineer in Charge. NS 17 Providing and fixing 4mm thick teak ply (ISI marked) with exisitng wooden members including the cost of nails, fevicols etc.complete in all respect to the entire satisfaction of Engineer-in-charge. 18 Providing and fixing 4 mm thick commercial ply (ISI marked) on the exisitng wooden members including the cost of nails, fevicols etc.including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. NS 19 Providing and fixing 6mm thick commercial ply (ISI marked) on the exisitng wooden members including the cost of nails, fevicols etc.including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. 20 Providing and fixing of plyboard consisting of 18 mm thick commercial ply(ISI marked) phenol bonded fixed with hard wood battens and guttiesincluding the cost of necessary lipping screws, nails,fevicol complete in all respect and to the entire satisfaction of the Engineer in charge. N.S

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB