Tender For Repair And Maintenance To New Allotment Of Qtr. No. B/3, Type-Iii In Telecom Colony Sidhgora At Jamshedpur (Jamshedpur -Ba), Jamshedpur-Jharkhand

Tender For Repair And Maintenance To New Allotment Of Qtr. No. B/3, Type-Iii In Telecom Colony Sidhgora At Jamshedpur (Jamshedpur -Ba) Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : a) 200x10 mm 1.00 Each b) 150x10 mm 1.00 Each 2 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 125 mm 10.00 Each 3 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. a) 250 mm weighing not less than 150 gms. 12.00 Each 4 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm Page 102 CONTRACTOR Executive Engineer (Civil) SI.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineerin- charge, manufacturer’s specification & drawing. a) 30 mm thick plain PVC door shutters. 3.00 Sqm 5 Distempering with 1st quality acrylic distember (Ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a) Old work (one or more coats) 250.00 Sqm 6 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a) One or more coats on old work. 52.00 Sqm 7 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer- In-Charge. a) With cement mortar 1:4 (1 cement : 4 fine sand). 2.00 Sqm 8 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 1.00 Sqm Page 103 CONTRACTOR Executive Engineer (Civil) SI.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs) 9 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 3.00 Each 10 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. a) 10 litre capacity - White 1.00 Each 11 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Semi rigid pipe (i) 32 mm dia 1.00 Each (ii) 40 mm dia 1.00 Each 12 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1.00 Each 13 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 1.00 Each 14 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 1.00 Each Page 104 CONTRACTOR Executive Engineer (Civil) SI.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs) 15 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall a) 20 mm nominal outer dia Pipes. 6.00 metre b) 25 mm nominal outer dia Pipes. 3.00 metre 16 Providing and fixing PTMT bib cock of approved quality and colour. a) 15mm nominal bore, 122 mm long. Weighing not less than 99 gms. 2.00 Each b) 15mm nominal bore, 165 mm long. Weighing not less than 110 gms. 1.00 Each 17 Providing and fixing PTMT stop cock of approved quality and colour. a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 2.00 Each 18 Providing and fixing PTMT pillar cock of approved quality and colour . a) 15mm nominal bore, 107 mm long Weighing not less than 110 gms. 1.00 Each 19 Providing and fixing PTMT grating of approved quality and colour. a) Circular type. (i) 125 mm nominal dia with 25 mm waste hole. 2.00 Each 20 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. 1.00 Each Page 105 CONTRACTOR Executive Engineer (Civil) SI.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs) 21 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. 1.00 Each 22 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. a) 15 mm nominal bore with 45 cm length. 2.00 Each 23 Easy and adjusting steel glazed window by cleaning, iron filing and oiling etc. and making good the same for easily opening and closing as per

INR 177 /-

INR 48477.0 /-