Tender For Proposal For Floating Public Tender (Two Bid) For Construction Of 4 Nos Stalls Of Beml Township Beml Ltd And Construction Of Estate Office At Beml Township; 1 Demolition/dismantling the existing Size Stone masonry wall in any thickness etc., including stacking the serviceable material at a place as shown and disposal of unserviceable material / debris outside the site premises to a distance not exceeding 5.0KM which is not objected by any local civic authorities etc., complete all as specified and as directed by Engineer in charge. Note: The dismantled materials shall be removed immediately from the premises without disturbing the regular public / traffic movement on the road and the quoted rate is deemed to include for all lead & lift etc cum 15.00 2 Earthwork excavation by mechanical/manual means not exceeding 1.50m in width and not exceeding 1.50m in depth and not exceeding area 10 sqm on plan in all kinds of soil but excluding hard rock for foundation/ pits including getting out the excavated earth, with a lead upto 50 mts, including dressing of sides, dewatering ground water/rain water, compaction including disposal of debris outside the site premises to a distance not exceeding 5.0KM which is not objected by any civic authorities etc., complete all as specified and directed by Engineer in charge. Cu.M 100.00 3 Providing and laying in Position Plain cement concrete of mix proportion 1:4:8 using stone aggregate of 40mm down graded granite aggregate, laid in layers not exceeding 15cms well compacted for foundation bed, under floors and other similar works including curing etc.,complete all as specified and as directed by Engineer in charge. Note: The rate quoted for the item shall be deemed to include for providing and removal of centering/shuttering wherever necessary. Cu.M 30.00 4 Providing and constructing size stone masonry in cement mortar 1:6 for foundations with courses not less that 20cms height and providing bond stones at every 1.5mtrs apart in each course including chisel dressing and curing etc, complete all as specified and directed by engineer in charge. Cum 21.00 5 Providing & laying in position TMT bars (Fe 500 grade) in reinforcement conforming to relevant IS in various diameters for various locations & levels as shown in drawing, cut to length and bent to shape required, binding spirally with MS wire (annealed) of size not less than 0.9 mm dia including all lead, lift, etc., complete all as specified and directed by Engineer in charge. NOTE: a) The rate quoted by the Contractor for the item is deemed to include for cement mortar cover blocks as per the requirement at site and providing and removal of scaffolding/staging wherever necessary. b) Reinforcement will be measured based on actual qty placed in position on standard weight basis, no allowance will be made for rolling margin. c) Only authorized laps, chairs and spacers shall be measured and paid. Kgs 2330.00 6 Providing, mixing and laying in position Reinforced Cement Concrete M20 grade of mix proportion 1:1.5:3, using 20mm graded down size granite aggregate for Plinth Beams,etc complete including curing, Vibrating, compacting, finishing,dewatering wherever necessary including lead, lift etc., complete all as specified and directed by Engineer in charge. Note: a) Reinforcement shall be measured and paid separately under relevant item. b) The rate quoted by the Contractor for the item is deemed to include for providing and removal of form work/centering/shuttering wherever necessary. Cum 55.00 7 Providing and laying Plain Cement Concrete of mix proportion 1:2:4 average 75mm thick using 20mm/12.5mm graded granite aggregates for flooring, plinth protection etc., laid to a proper slope & gradient, well compacted,mechanical/manual mixing including curing etc., complete all as specified and directed by the Engineer in charge. Cu.M 30.00 8 Providing & constructing Burnt brick masonry of required thickness in Cement Mortar 1:6 using first class table moulded bricks including necesssary curing etc., complete all as specified and directed by Engineer in charge. Note: The rate quoted is deemed to include for providing and removal of scaffolding/staging wherever necessary. Cum 90.00 9 Rendering 15mm thick in Cement Mortar 1:4 on internal walls on fair faces of brick or concrete surfaces including finishing the surface even &smooth, curing, tools & tackles etc., complete all as specified and directed by Engineer-in-charge. Sqm 370.00 10 Rendering 20mm thick in Cement Mortar 1:4 on external walls on fair faces of brick or concrete surfaces including finishing the surface even &smooth, curing, tools & tackles etc., complete all as specified and directed by Engineer-in-charge. Sqm 425.00 11 Rendering 12mm thick in Cement Mortar 1:4 on ceiling on fair faces of brick or concrete surfaces including finishing the surface even &smooth, curing, tools & tackles etc., complete all as specified and directed by Engineer-in-charge. Sqm 140.00 12 Preparing of internal walls by scrapping, sandpapering, removing dust & and supplying and applying 2 or more coats of Premium Plastic emulsion paint of approved colour/shade manufactured by M/s. Asian Paints/Berger Paints over a coat of primer and 3mm thick full putty etc., complete all as specified and as directed by Engineer in Charge. Note: The rate is deemed to include for Providing & removal of scaffolding wherever necessary b) Wastages. 3) Removing all splashes, dirt, etc. and leaving premises in a clean state. Sqm 375.00 13 Preparing the new external wall surfaces by removing dust , scrapping etc., and supplying and applying two coats of exterior emulsion paint of first quality approved brand for extertnal walls and colour manufactured by M/s.Asian Paints (ACE) /Berger Paints over a coat of exterior primer and 3mm full putty of M/s. Birla White Wall seal waterproof putty etc., complete all as specified and as directed by engineer in charge. Note.1) Contractors quoted rate is deemed to include for providing and removal of scaffolding/ suspending jhoola for painting, crack filling compound. etc Sqm 200.00 14 Preparing of internal ceiling surfaces by scrapping, sandpapering, removing dust & and and supplying and applying two coats of emulsion paint of first quality approved brand and colour manufactured by M/s.Asian Paints/Berger Paints over a coat of primer and 3mm full putty etc., complete all as specified and as directed by engineer in charge. Note. Contractors quoted rate is deemed to include for providing and removal of scaffolding/ suspending jhoola for painting, crack filling compound. etc Sqm 150.00 15 Providing & laying 10mm thick premium quality glazed/matt vitrified tiles of approved size, shade, pattern, manufactured by M/s. Naveen/ Johnson/ Kajaria/Somany/RAK in flooring & skirting (for skirting 150 mm height approximately), & fixed over a bedding layer of 20 mm thick cement mortar 1:4 and Cement mortar 1:4 15 mm thick backing coat for skirting. etc., complete all as specified & directed by the Engineer in Charge. Note: (1) Skirting tiles will be measured and paid on area basis. (2) The quoted rate is deemed to include for all wastages.(3) The basic cost of tiles shall range between Rs.75/sft to Rs.100/Sft inclusive of GST. Sqm 155.00 16 Supplying and fixing rolling shutters made of 80x1.25mm MS laths, interlocked together through their entire length and jointed at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454-part-1 including 1.25mm thick MS top cover for rolling shutters, safety lever locks mild steel with 4 levers, ball bearings including all surfaces painted with 2 two coats of synthetic enamel paint of approved colour over a coat of primer, all fitted and fixed including all accessories etc.,complete all as specified and directed by Engineer in charge. Note:- Clear area of shutter shall be measured for payment. Sqm 50.00 17 Providing and fixing 15 mm thick Tiled false ceiling with tegular edge manufactured by M/s. Armstrong in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections. The tiles shall be fixed in position on STICHED TRULOK/24 mm PRELUDE exposed system hot dipped galvanized steel with white precooked exposed can and the frame shall comprise of:- 24mmX38mm- Main Tee of 3600mm 24mmX30mm-Cross Tee 0f 1200mm 24mmX25mm-Cross Tee of 600mm 22mmX22mm-Wall Angle of 3000mm length The G.I. Wall angle to be fixed the G.I. Wall angle to be fixed along the perimeter fixed with screws/rawl plugs. The GI Main runners spaced at 1200 mm counters securely fixed to the structural soffit by approved hangers of 2.0mm GI wire pre stressed at 1200mm Max. centers. Flush fitting 1200mm long cross tee. To be interlocked between main runners at 6oo mm centers. The 600mm cross tees are placed between 1200mm Cross Tee (parallel to main runner) to form a 600 X 600 mm module. Extra suspension to be provided around light fixtures. Make: M/s. ARMSTRONG Sqm 95.00 18 Supplying, hoisting & fixing in positing triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of capacity 1000 litres of M/s Sintex / Astral/ Kaveri /Equivalent including connecting up pipes, with all necessary hardware items etc., complete all as specified and directed by Engineer in charge. Nos. 2.00 19 Supplying and fixing 15mm diameter brass chromium plated quarter turn Pillar cock of first quality approved brand manufactured by M/s.ESS ESS /Parryware/Johnson/ Hindware or equivalent make including all accessories conforming to relevant IS etc., complete all as specified and directed by Engineer in Charge. Nos. 6.00 .... more in document
