Tender For Repairing/ Renovation Of Breakwater Sub Division Office At Campbell Bay In Great Nicobar Island; 1 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead of: Including all labour charges, transportation charges, minor tools, labour cess, GST etc. Complete.precoated galvanised iron profile sheets 2 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge. Including all labour charges, transportation charges, minor tools, labour cess GST etc. Complete. 3 Demolishing cement concrete 1:3:6 or richer Mix including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Including all labour charges, transportation charges, minor tools, labour cess GST etc. Complete. 4 Making plinth protection75mmthickof cement concrete1:3:6 (1cement, 3Pulveriseds and, 6graded stone aggregate 40mm nominal size) including finishing the top smooth & finished withneat cement @9.76 kgs per 10.00Sqm, including cost of cement, transportationcharges of all materials to work site, all labour charges minortools,GST,labour welfare cess etc complete. 5 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc., including cutting,hoisting,fixing in poistion and applying a priming coat of approved steel primer, including welding and bolted with special shaped washer Including all labour charges, transportation charges, minor tools, labour cess GST etc. Complete.etc. complete. 6 Painting with red oxide zinc chromate yellow or any other primer of approved brand and manufacture on steel galvanised iron/ steel to give an even shade.Including all labour charges, transportation charges, minor tools, labour cess GST etc. Complete.etc. complete. 7 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufactures specifications including appropriate priming coat, preparation of surface, etc. complete.( Steel Work) 8 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as apporved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling /self tapping screws of size(5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required, all labour charges, minor tools, labour welfare charges, all transportation charges &GST etc., complete. 9 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling /self tapping screws complete, all labour charges, minor tools, labour welfare charges, all transportation charges &GST etc., complete.a) Ridges plain (500-600mm). 10 Dismantling doors windows and clerestore windows (steel or wood) shutters including chowhats, architrave, holdfats etc, complete and stacking within 50m lead and including labour charges, labour cess, GST and minor tools etc.,complete. 11 Providing wood work (Superior Hardwood Category II) inframes of doors, windows, clerestrory windows and other frames wrought framed and fixed inposition. including cost of timber, transportation charges towork site, alllabour charges minor tools,GST, labour welfare cess etc complete. 12 Providing and fixing pannaled or panneled and glazed shutters for doors,windows and clestory windows including black enammeled Aluminium Butt Hinge10Cm with necessarys crews excluding pannelling which will be paidfor separately, including cost of timber, transportation charges to worksite,all labour charges minor tools,GST,labour welfare cess etc complete. 40mm thick SHW 13 Priming coat With ready mixed pink or grey primer Istquality of approvedbrand by EIC and manufactureor equilenton wood surface (hardand softwood). including cost of paint,brush,scaffolding arrangements, transportationcharges of all materials towork site all, labour charges, minor tools, labour welfare Cess, GSTetc.Complete 14 Painting with ready mixed paint of approved brand and manufacture in allshades to give an even shade,preparation of surface includingcleaning,scrapingof the existing painted surface, cost of ready mixedpaint,brushes, transportation charges,scaffolding arrangments,all labourcharges,minor tools, labour welfare cess,GSTetc. complete.Oldwoodwork (One coat) 15 Providing and fixing Aluminium tower bolt Size 200x10mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shape with nuts and screws including cost of all labour charges, minor tools, Labourwelfare cess, GST etc., complete. 16 Providing and fixing Aluminium Handle 100mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shape with nuts and screws including cost of all labour charges, minor tools, Labourwelfare cess, GST etc, complete. 17 Providing and fixing mirror of required shape and size with plastic moulded frame of approved make and shade with6mm thick hardboardbacking, including transportation, all labour charges, minor tools, Labourwelfare cess, GST etc, complete. Rectangular shape 453 x 357 mm 18 Providing and fixing12mm thick pre laminated three layor medium density(exterior grade) particle board Grade1. Type II conforming to IS : 12823 bonded with phenol formaldyde synthetic resin, of approved brand andmanufacture inpanelling fixed inaluminum doors, windows shuttersandpartition frames with C.P. brass/stainlesssteel screw etc.compleeasperarchitectural drawings and directions of engineer-in-charge, including cost ofall materials, all labour charges, transportation charges,scaffolding charges minor tools,GST,labour welfare cess etc complete.Prelaminated particle board with decorative finish on both side. 19 Distempering one coat with oil bound washable distember of approvedbrand and manufacture to give an even shade over old cement surface,preparation of surface including cleaning,scraping of the existing paintedsurface, cost of distemper, brushes, transportation charges, scaffoldingarrangments, all labour charges, labour welfare cess, GST & minor tools etc. complete.(Old work) 20 Painting two coat with antifungal paint of approved brand and manufacture on old wall surface give an even shade including cost paint andother materials,preparation of surface including cleaning, scraping of the existing paintedsurface,transportation charges, labour chargess, scaffolding arrangements, cost of putty. Labour welfare cess, GST and minor tools etc., complete (one or more coat) 21 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to thedumping ground, all complete as per direction of Engineer-in-Charge. includingtransportation charges, labour chargess, scaffolding arrangements, Labour welfare cess, GST and minor tools etc., complete. a) With cement mortar 1:4 (1 cement: 4 fine sand) 22 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. Includinglabour chargess,Labour welfare cess, GST and minor tools etc., complete. 23 Providing and fixing white vitreous china pedestal type water closet (European type W. C pan ) with seat and lid, CP brass hinges and rubber buffers, 10 liters low level PVC flushing cistern with fitting C.I ., MS brackets, 40 mm diameter flush pipe with fitting and Clamps, Overflow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fitting and brackets, cutting and making good the walls and floors wherever required. Includingtransportation charges, labour chargess,Labour welfare cess, GST and minor tools etc., complete. 24 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:Includinglabour chargess, Labour welfare cess, GST and minor tools etc., complete. a) All kinds of soil 25 Dismantling tile work in floors and roofs laid in cement mortar including stacking material, Includinglabour chargess, Labour welfare cess, GST and minor tools etc., complete.within 50 metres lead.a) For thickness of tiles 10 mm to 25 mm 26 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Includingtransportation charges, labour chargess,Labour welfare cess, GST and minor tools etc., complete. 27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge .Includingtransportation charges, labour chargess,Labour welfare cess, GST and minor tools etc., complete. Internal work - Exposed on walla)40 mm dia 28 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. .Includingtransportation charges, labour chargess,Labour welfare cess, GST and minor tools etc., complete. Internal work - Exposed on walla) 25 mm dia 29 Providing and fixing brass gate valve with C Iwheel of approved quality(screwedend), including all labour charges, transportation chargesLabour welfare cess, GST minor tools etc, complete. 25 mm nominal bore 30 Providing and fixing of approved quality of GI TEE of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete. 15 to 40mm Nominal Bore 31 Providing and fixing of approved quality of GI ELBOW of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete. 15 to 40mm Nominal Bore 32 Providing and fixing of approved quality of GI UNION SOCKET of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete. 15 to 40mm Nominal Bore 33 Providing and fixing of approved quality of GI NIPPLE of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete. 15 to 40mm Nominal Bore 34 Providing and fixing of approved quality of GI REDUCER of following sizesincluding cutting and threading, labour charges, minor tools, Labourwelfare cess, GST etc, complete. 15 to 40mm Nominal Bore 35 Providing and fixing brass bib cock of approved quality, including labour charges, transportation charges, Labour welfare cess, GST, minor tools etc, complete. 15mm Nominal Bore 36 Providing and fixing on wall face unplasticised, PVC (workingpressure4 kgf per sqcm) rainwater pipes conforming to IS4985 includingjointing with seal ring conforming to IS5382 leaving10mm gap forthermal expansion, Including all labour charges, Labour welfare cess,GST, mionr tools etc, complete. (110m Dia) 37 Providing and fixing of approved quality of PVC Tee of followingsizes including cutting and threading, including fittings,all labourcharges,transportation charges, Labour welfare cess, GST, minor tools etc, complete. 110mm dia 38 Providing and fixing of approved quality of PVC Elbow of followingsizes including cutting and threading, including fittings,all labourcharges,transportation charges, Labour welfare cess, GST, minor tools etc, complete. 110mm dia 39 Supply of following Semiskilled & Unskilled labourersasand whenrequired for attending misc.works as per directionof EIC which are nonsusceptible of easurement including cost of labour charges,minor tools,labour welfare Cess, GST etc complete. 40 SM 41 USM
