Tender For Internal Electrical Work New Waiting Hall Building At Magistrate Office Ecotech-2, Greater Noida. - Supply And Fixing Of Led Tube Light With Batten Suitable For Up To 1 X 22 Watt Led Tube Light Fitting Including Tube On Surface Complete In All , noida-Uttar Pradesh

Tender For Internal Electrical Work New Waiting Hall Building At Magistrate Office Ecotech-2, Greater Noida. - Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AA (UPPWD-2018/1413) 3 Wiring point for light with 1.5 sq. mm.FRLSH PVCinsulated multistrand copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box with modular type switch in place of piono type switch etc., complete in all respect, as directed including matching colour wash.(UPPWD-2018/131 (C) + 187 (A)) 4 Supply and wiring of 3 numbers 4 sq. mm. FRLSH PVCinsulated 1100V grade multistrand copper/conductor cable in 25 mm dia heavy duty (2mm thick) PVC conduit, with two number 2.5 Sqmm FRLSH copper PVC insulated multistrand conductor cable earth continuity wire drawn in conductor etc., complete in all respect. (UPPWD-2018/231 (C)) 5 Supply and wiring of submain with two number 2.5sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 Nos. 1.5 Sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduitpartly laid in slab along with reinforcement before connecting and partly concealed in wall complete in all respect. (UPPWD-2018/1307 (C)) 6 Supply and wiring of 3 number 6 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25 mm dia heavy duty (2mm thick) PVC insulated multistrand copper conductor cable as earth continuity wire drawn i conduit partly concealed in wall and partly laid in slab along with wire reinforcement before connecting complete in all respect. (UPPWD-2018/262 (C)) 7 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(UPPWD-2018/501 (I)) 8 3.5Cx25 Sqmm Cable 9 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (UPPWD-2018/504 (E)) 10 3.5Cx25 Sqmm Lug 11 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. (UPPWD-2018/701) 12 S & F surface/Flush mounting 8 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. (UPPWD-2018/1028 (A)) CAT-A 13 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve (UPPWD-2018/1002) CAT-B 14 S&F of 63 Amp. 4 Pole Isolator (UPPWD-2018/1007 (B)) CAT-B 15 Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. (UPPWD-2018/1203 (C)) 16 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.(UPPWD-2018/716) 17 Supply and fixing of switch box 250 x 250 x 65 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed& brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.(UPPWD-2018/163) 18 Same as above item No 14 but of 150 x 150 x 65 mm size (UPPWD-2018/160) 19 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (DSR-2018/1.24.1) 20 5/6 A switch 21 3pin 5/6 A socket outlet (1.24.4) 22 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (DSR-2018/1.32) 23 Supply, Installation, Testing and Commissioning of 1200mm dia sweep ceiling fan with standard down rod. Complete in all respect, as per direction of E-I/C. (UPPWD-2018/1501) 24 Supply, Installation, Testing and Commissioning of 300mm dia heavy duty 900 RPM exhaust fan Complete with louvered shutters. Complete in all respect, as per direction of E-I/C. SOR-2024/52 25 Supply and fixing and concealing of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.(UPPWD-2018/149 (a)) 26 Labour Cess and GST will be paid extra as per govt. orders

INR 840 /-

INR 5.63 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB