Tender For Renovation Of Main Receiving Station (Mrs) On Rear Side Of Electrical Maintenance Beml Factory; 1 Preparing the old Painted surface of external walls including stucco area by water washing, sand papering/wire brushing including providing necessary repairs to cracks, and cleaning the surface from dust, dirt and filling/closing the cracks with suitable crack filling compound and applying two coats of exterior emulsion paint of first quality approved brand and colour manufactured by M/s. Asian Paints (Apex ultima)/Berger Paints after successively drying each coat over a coat of primer and touch up putty wherever necessary etc., complete all as specified and directed by Engineer in Charge. Note: 1) The rate quoted is deemed to include for providing and removal of scaffolding, staging/ladder, suspending jhoola wherever required and protective measures etc. 2) Cleaning the floor surface after painting. 3) wastages. Sq.M 400.00 2 Preparing the existing old Painted surface of internal walls by scrapping, sand papering, including necessary repairs to cracks, scratches and cleaning the surface from dust, dirt and filling/closing the cracks with crack filling compound and applying two coats of Premium Plastic emulsion paint with a coat of primer and touch up putty wherever necessary of first quality approved brand and colour manufactured by M/s.Asian Paints/Berger paints etc., complete all as specified and as directed by Engineer in charge. Note: The rate is deemed to include for Providing & removal of scaffolding wherever necessary b) Wastages. 3) Removing all splashes, dirt, etc. and leaving premises in a clean state. Sq.M 350.00 3 Dismantling the existing brick masonary wall built in Cement mortar in any thickness including all quoins, arches, pillars etc.,and disposal of unusable materials or debris outside the site premises to a distance not exceeding 5.0 KM not objected by local civic authorities including lead ,lift etc,complete all as specified and directed by Engineer in charge. Note: The dismantled materials shall be removed immediately from the premises without disturbing the regular production activities . etc., complete all as specified and directed by the Engineer-in-charge. Cum 7.00 4 Providing and laying in position Plain Cement Concrete of mix proportion 1:2:4 using 20mm graded granite aggregates for flooring/other similar works, laid to a proper slope & gradient, well compacted,mechanical/manual mixing including finishing the surface neat & even by using extra cement by plastering, necessary curing etc., complete all as specified and directed by the Engineer in charge. Cum 13.00 Sub: Renovation of Main Receiving Station (MRS) on rear side of Electrical Maintenance by replacing the existing old roof sheets, with new Galvalume roof sheets, internal & external Painting and providing lean to shed roof covering for diesel generator plant and other associated Civil works in Bangalore Complex, BEML Ltd, Bangalore560075. SCHEDULE A - BILL OF QUANTITIES BEML LIMITED, BANGALORE 5 Demolition/ dismantling the existing cement concrete flooring/hardstanding concrete of any description and in any position not otherwise specifically provided etc and stacking of serviceable materials if any and disposal of unusable materials or debris outside the site premises to a distance not exceeding 5.0 KM not objected by local civic authorities including lead,lift etc,complete all as specified and directed by Engineer in charge. Note: The dismantled materials shall be removed immediately from the premises without disturbing the regular production activities . Cum 8.00 6 Removing the existing corrugated/semi-corrugated AC/GI/ FRP roof sheets including J bolts, washers carefully at a minimum height of 10Mtrs approximately, stacking the usable sheets and shifting to salvage stores inside the factory premises and carting away the unusable/broken sheets/curves outside the factory premises not exceeding 5KM which is not objected by local civic authorities etc., complete all as specified & directed by the Engineer-incharge. Note:-a) Clear area of roof sheet excluding lap length shall be measured for payment. b) The rate quoted is deemed to include for Providing & removal of scaffolding, staging/safetynets wherever necessary.c) The rate is quoted is deemed to include for arranging the vehicle for shifing the usable sheets to salvage store as shown inside the factory. d) The rate is deemed to include for carting away the broken/unusable sheets outside the site premises. Sq.M 170.00 7 Supplying & fixing 0.6mm thick galvalume single skin HIRib trapezoidal/approved profile PPGL colour coated sheet for roof of approved color & shade, 1060mm supply width, 975mm-1000mm covered width 29mm-30mm crest height, 24mm crest width with min. 195mm-200mm pitch minimum 0.50mm thick TCT, Galvalume(55% aluminum-43%Zinc Coating), 150 GSM with minimum yield strength of 550 Mpa. The sheet shall have wide pans with stiffening ribs manufactured by M/s JSW/TATA. The sheet shall be fixed by means of anticorrisive self drilling self tapping mechanically galvanised fasteners with integral EPDM washers. The scope shall include all sealing of joints, curves, edges or other accessories with silicon sealent. The sheet shall be laid with a minimum lap of 150mm at the ends and special male & female lapping at each side. The minimum lap of sheets with ridges, hips & valleys shall be 200mm. The sheets shall be secured to purlins by means of self driven screws or GI J or L hook bolts and nuts with bitumen and GI limpet washer as per the requirement of site and as directed, etc , complete all as specified and as directed by Engineer in charge. Note:- 1) The finished/Covered area of roof sheet excluding lap length shall be measured for payment. 2) The rate quoted is deemed to include for providing and removal of scaffolding, staging/ladder wherever necessary and protective measures etc. Sq.M 340.00 .... more in document
