Tender For Construction Of Munshi Prem Chand Library In Model Town, Mc Hisar., hisar-Haryana

Tender For Construction Of Munshi Prem Chand Library In Model Town, Mc Hisar.; 1 Dome Fixed Camera:Supply, installation, testing and installation of WDR 4MP IR Dome Camera, with 1/2.7” Progressive Scan CMOS H.265H.264. Resolution suppore: 4MP (2560×440), 1080P(1920x1080), 720P(1280x720), D1, CIF, 480 x 240,Focal Length 2.8mm/@F1.4,Min.IR distance upto 30m, Supports WDR, 3D DNR, HLC andBLC,Defog,Triple streams, Smart codec by ROI, Cyber Security-HTTPS / IP Filter / IEEE 802.1X / Blacklist and whitelist/ account security/ telnet access control /serial password,Video Analytics : Object removal (object left/missing detection), scene change and video blur detection, intrusion and line crossing.Edge Storage Built-in micro SD card slot, up to 128GB, Protection Level IP67 and IK10, Regulatory NDAA, Compatibility: Onvif S and G...(Make Honey well/Panasonic/Samsung) 2 Supply , Installation , Testing and commissioning of 32 Channel NVR (Network Vedio Recorder), for recording upto 64CH @ 1080P with 08 nos. SATA HDDs minimum 80TB storage or more (recording requirement all cameras recording at 2MP, 25fps for 30 days), H.265/H.264/MJPEG/MPEG4 codec decoding, Front Control Pannel with LEDs Indication, 3 nos. USB, iPhone: iPad: Android based Mobile clients, Video Export feature on USB, Search Mode: Time/ Date: Alarm: Motion Detection (MD): Exact Search (accurate to a second): Smart Search, Dual HDMI Output, Alarm Input (16 nos.), Alarm Output (4 nos.),eSATA Device, 320Mbps each Incoiming and Outgping throughput, Operating Temperature –10°C to 55°CCertification : CE, FCC and UL including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge. Redundancy features available in NVR ( If required take additionalNVR)..(Make Honey well/Panasonic/Samsung) 3 Supply, installation, testing and commissioning of 55` inches LED screensuitable for showing out puts from NVRs on a single screen(24x7)completein all respect complete as required. (Make Sony/LG/Samsung) 4 Supply, laying and and termination of CAT-6 Cable 23AWG solid bare electrolytic grade copper unshielded type cablein existing conduits/raceway/cable tray. Unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system, CM/CMR rated.cable should be ETL Verified, UL Listed and UL channel verified- All three Certificates are mandatory.It should be IEEE 802.3ab - Zero-bit Error, ETL verified .cable Frequency tested up to 500 MHz. ..(Make Hikvision/Dahua Technology/Bosch) 5 Supply, installation, testing and commissioning of 8 TB Survillance HDD for camera recording.(24*7 )..(Make Hikvision/Dahua Technology/Bosch) 6 Supply, installation, testing and commissioning of Fiber patch cord 1 mtr. complete as required(Make Hikvision/ Dahua Technology/ Bosch) 7 Supply, installation, testing and commissioning of Cat -6 Patch cord 2 Mtr. complete as required...(Make Hikvision/Dahua Technology/Bosch) 8 Supply, Installation, Testing and Commissining of4 Reader Access Controller, On-board 10/100 Mbps Ethernet Communicates directly with the central system, Structured database allows storage of large amounts of cardholder records for off-line card validation, Reader communications via standard Wiegand/OSDP, Two relays (normally opened or closed) and open collector outputs, Self resetting fuses – saves maintenance time, A supervised input can be mapped to a physical out put, Onboard LED - provides visual status, Dedicated tamper input,Flash Memory 4GB, Storage 1 million cardholders at the door, Transactions1 million transactions in offline operation, Controller should be CE, FCC, UL294 Certified...(Make Honey well/Panasonic/Samsung) 9 Supply , installation, testing and commissioning of Multi Technologycards as per specification...(Make Honey well/Panasonic/Samsung) 10 Access Control Integrated Software :Supply, installation, testing and commissioning of Access control software, and integrated security management system, with AES 128 Bit of Encryption, Software should support Unlimited numbers of Cardholders, unlimited doors, lift Control, Database Partioning, Central Alarm Monitoring and Management, Integrated Photo ID Badging Client, Time and Attendance and Visitors management, Web Client. Software should support Redundacy Failover, and Seamless integration with multiple systems including access control, video, intrusion, fire and perimeter detection. ..(Make Honey well/Panasonic/Samsung) 11 Single Leaf Electro Magnetic Lock of Suitable Capacity(600 lbs) as per specification..(Make Honey well/Panasonic/Samsung) 12 DoubleLeaf Electro Magnetic Lock of Suitable Capacity(1200 lbs) as per specification..(Make Honey well/Panasonic/Samsung) 13 Supply, Installation, testing and commissioning of Push Button as required Entry/ exit from the Access..(Make Honey well/Panasonic/Samsung) 14 Supply, Installation, testing and commissioning of Megnatic Contact as requiredfrom the Door..(Make Honey well/Panasonic/Samsung) 15 Supply installation, testing and commissioning of 8 Core x 1 sq mm multi strand, copper, armored shieldedCable as per specification (between the every card readers and the access controllers) 16 Supply installation, testing and commissioning of 4 Core x 1.5 Sq mm, multi strand, copper, shielded, armoredcable as per specification (between controller, EM Lock, and push to exit button and door sensor) 17 Supply installation, testing and commissioning of External 12V 5amp or 24V 2.5 Amp 16 terminal Power Supply 18 SITC of All-in-One Desktop-computers 13th Gen Intel® Core™ i7, Windows 11, (Make :- Dell / HP) 19 `SITC of 42U (W 800mm/ D 800mm) Floor mount with front glass door and side panels with lock and key (load bearing capacity of 40Kgs), AC main Channel 12 points 5 Amp (PDU) with Mounting Hardware (Pack of 10) as per specification etc. all completeApproved Make: Valrack / Netrack /President` 20 `SITC of Rack Mountable Patch Panel, 24 Cat 6A Loaded Ports, Copper Patch Panel, Straight, Unshielded, Durability (IDC Life) 200 termination cycles with in Built Wire Manager, Grounding Bolt included as per specification etc. all completeApproved Make: Belden / 3C3 / Commscope / Siemon / Legrand ` 21 Supply, Installation, testing and commisioning of Switch 24 ports Cisco Catalyst 1000-24T-4G-L Network Switch, 24 Gigabit Ethernet Ports, 4 1G SFP Uplink Ports, (C1000-24T-4G-L) (MAKE CISCO) 22 Supply, Installation, testing and commisioning of wireless controller Network Management Device WAN Capable Air-CT2504-5-K9 Wireless Controller (MAKE CISCO) 23 Supply, Installation, testing and commisioning of Dual Band Wireless Access Point,(MAKE CISCO) 24 Supply, Installation, testing and commisioning of OI 25 Supply, Installation, testing and commisioning of Patch Cord 26 `SITC of Single Face Plate Shuttered, Provision for accepting any Keystone Style RJ45 Outlets, Capable of providing RJ45/ RJ11 type, Label Holders with Plastic covers, Built-in Dust Covers with Back boex as per specification etc. all completeApproved Make: Belden / 3C3 / Commscope / Siemon / Legrand ` 27 `SITC of Dual Face Plate Shuttered, Provision for accepting any Keystone Style RJ45 Outlets, Capable of providing RJ45/ RJ11 type, Label Holders with Plastic covers, Built-in Dust Covers with Back boex as per specification etc. all completeApproved Make: Belden / 3C3 / Commscope / Siemon / Legrand ` 28 Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)…………… 30 Watt - 2x2 Recessed Mounted LIGHT MAKE - Philips 29 Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)…………… 26 Watt - 1x4 Hanging and Pendant Lights MAKE - Philips 30 Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)…………… 12-Watt Recessed LED (ROUND TYPE LED LIGHT) Philips 31 Supply, Installation, testing and Commissioning of the following lighting fixtures with all fixing accessories etc. complete as required.(NS)…………… 100-Watt FLOOD LIGHT Philips 32 Supply, erection, testing of 1200mm diaCeiling fans Stealth ES Wood Colourwith suitable GI pipe complete in all respects complete. Make (Havells / crompton) 33 MAIN LT PANEL (INBUILT CAPACITOR PANEL)Incoming Transformer400 amps 25 kA 440 volt FP EDO MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link Metering for incoming:3 nos 2500/5A Class 1, 15 VA Burden CT`s for metering and 1 nos associated Neutral CT for earth fault module. Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port for measurement of THD, KVARH KW, KWH, KVAR, PF, V, A, Hz, equivalent to EM6400 NG, with 3 Nos. current transformers of required ratio, 15 VA Class 1.0 Phase indication Lamp and ON/OFF indicating lamps with3X2A SP MCB as backup protection.Incoming DG400 amps 25 kA 440 volt FP EDO MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link Metering for incoming:3 nos 2500/5A Class 1, 15 VA Burden CT`s for metering and 1 nos associated Neutral CT for earth fault module. Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port for measurement of THD, KVARH KW, KWH, KVAR, PF, V, A, Hz, equivalent to EM6400 NG, with 3 Nos. current transformers of required ratio, 15 VA Class 1.0 Phase indication Lamp and ON/OFF indicating lamps with3X2A SP MCB as backup protection.Bus Bars:TPN Aluminium busbars aluminium three phase and neutral busbars rated at 600 amps, 25 KA, insulated with heat shrinkable coloured PVC sleeves and clip on shrouds for joints. Current density of Bus Bar to be 1.0 sq.mm / amp.Outgoing 1 nos. 315amps 25 kA 440 volt FP MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link complete with:Phase indication Lamp and ON/OFF indicating lamps with MCB as backup protection.Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port for measurement of KWHr,V, A, equivalent to EM6433 NG, with 3 Nos. current transformers of required ratio, 15 VA Class 1.0 1 nos. 100amps 25 kA 440 volt FP MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link complete with:3 nos. 40amps 25 kA 440 volt FP MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link complete with:1 nos. 200amps 25 kA 440 volt FP MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link complete with: (8 Nos. 63 Amp 4PMCB With breaking capacity of10KA MAIN LT PANEL complete as aboverequired. 34 VRV ODU PANEL (IP 55)Incoming:1 Nos. 315 Amp FP MCCB OF 16 KA Breaking CapacityMetering for incoming:3 nos 315/5A Class 1, 5 VA Burden CT`s for metering and 1 nos associated Neutral CT for earth fault module. Digital flush type class -1.0 accuracy multifunction meter with RS-485 communication port for measurement of PF, V, A, Hz, equivalent to EM6459 NG, with 3 Nos. current transformers of required ratio, 5 VA Class 1.0 Phase indication Lamp and ON/OFF indicating lamps with MCB as backup protection.Bus Bar:TPN Aluminium busbars aluminium three phase and neutral busbars rated at 400 amps, 16 KA, insulated with heat shrinkable coloured PVC sleeves and clip on shrouds for joints. Current density of Bus Bar to be 1.0 sq.mm / amp.Outgoing :5 nos. 100amps 16 kA 440 volt FP MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link complete with:1 nos. 100amps 16 kA 440 volt FP MCCB with overcurrent and short circuit and earth fault module, with heavy duty solid detachable neutral link complete with:1 Nos. 40 Amp 4PMCB With breaking capacity of10KA Complete Set as required above 35 Supplying installation testing and comissioning offollowing capacity True Online dual conversion(Pure Sine Wave), microprocessor based Online UPS System with five years warantee having pollution free instantaneous true sinewave control and without inbuilt isolation transformer, 3 Phase AC input and 3 phase AC output, LCD display and indication for various electrical parameters, LED indication with alarm for major fault, provision for remote indication and provision of communication to BMS system through RS 485/RS232/Modbus port etc. The UPS system shall be as per detailed specifications and shall be complete with parallel redundant kit, battery bank for providing 30 minutes backup time with SMF batteries having minimum 2 years warrantee, with all connections interconnections cables, MS stand for battery bank etc. complete as required Specifications of UPSa) Capacity : 20 KVA Capacity Online UPS System b) Technology : True Online dual conversion(Pure Sine Wave) Input Parametersa) Input Voltage range : 352-475VAC, 3-F AC Supply b) Rated frequency : 50Hz/ 60 Hz ± 10%c) UPS Power factor: 0.99 or better laggingd) Harmonic distortion: with Linear load =3%Output Parametersa) Rated Voltage: 415 V ± 10%b) Frequency: 50Hz ± 0.5Hzc) Output wave form: Pure sine wave`d) Overload capacity: 150% of rated load for 1 minutes125% of rated load for 10 minutes`General Parametersa) Ambient operating temp: Upto 40º C or betterb) Noise Level : = 65 db at 1.5m distance or betterc) Overall efficiency: 94% or betterd) Computer interface: RS232 / RS485e) Cooling: Forced Coolingf) Bypass: Manual/Static 36 GI RACEWAYIN FLOOR/ SCREED RACEWAYSupply and Fixing of factory fabricated pre-galvanised sheet steel raceway in 2mm thickness for bottom and sides and 2mm/ 3mm thick top cover including openable top cover floor junction boxes made from 2mm thick pre-galvanised GI sheets for bottom and sides and 3mm thick GI top cover complete with rubber gasketing beneath the top cover. The junction box shall be suitable to accommodate GI floor raceways as specified above, as called for including necessary civil work such as chase cutting in screed, fixing/ jamming the raceway, aligning and leveling and finishing with sand cement plaster and chicken wire mesh:40mm Depth100mm x 40mm (2mm top cover) 37 GI RACEWAYIN FLOOR/ SCREED RACEWAYSupply and Fixing of factory fabricated pre-galvanised sheet steel raceway in 2mm thickness for bottom and sides and 2mm/ 3mm thick top cover including openable top cover floor junction boxes made from 2mm thick pre-galvanised GI sheets for bottom and sides and 3mm thick GI top cover complete with rubber gasketing beneath the top cover. The junction box shall be suitable to accommodate GI floor raceways as specified above, as called for including necessary civil work such as chase cutting in screed, fixing/ jamming the raceway, aligning and leveling and finishing with sand cement plaster and chicken wire mesh:40mm Depth150mm x 40mm (2mm top cover) 38 `Supplying and placing in position 6 seater PU coated canteen table.Over all size of table shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick( plus /-1mm) base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass.Combination color of graphics shall be on the centre . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia shall be of 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs shall be fixed with understructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top` 39 `Supplying and placing in position canteen chair. The seat and back shall be made up of injection moulded high impact strength polypropylene polymer with indoor gate UV resistance. The dimensions of back shall be 51.6cm. (W) X 40.5cm. (H) and of seat shall be 52.5cm. (W) X 53.2cm. (D). The powder-coated (DFT 40-60 microns ) frame structure shall be made of 3.5±0.03cm x 1.5±0.03cm x 0.16±0.0128cm thk M.S. E.R.W. tube and welded connecting tube made of dia 2.22±0.03cm x 0.16±0.0128cm thk M.S. E.R.W. SQUARE tube. The shoes shall be made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. Product shall be Green Guard (UL)` 40 `Supplying and placing in position Library table. Over all size of the table shall be 1800 W x 900 D x 740 H mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading. Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube .` 41 `Supplying and placing in position revolving chair. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall be moulded with density =45 plus /-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min89.5 to max 100.5cm, Width and Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm` 42 `Providing and Placing in position 3 seater Sofa. Upperstructure shall be a single shell 1.2 ±0.1cm. thick hot pressed plywood. Dia 4mm zig-zag type assembly is mounted in the understructure for support and additional cushioning purpose. The seat is made up of PU foam with density 32 plus /-2 Kg/m3 having an additional top layer of PU foam with density 28 plus /-2 Kg/m3, upholstered with fabric or leatherette. The back is made up of 28 plus /-2 Kg/m3 with additional top layer of PU foam with density 23 plus /-2 Kg/m3, upholstered with fabric or leatherette. The leg is a welded assembly made up of stainless steel (grade SS 202) tube and plate. Overall Dimensions of Chair shall be Seat Height - 45.0 cm, Height - 82.0cm, Width and Depth of Chair as measured from pedestal - Width-205.5 cm and Depth-92.0 cm.` 43 `Supplying and placing in position of Center Table. Overall size of the table shall be 1000mm(L) x 600mm(D) x 425mm(H). Understructure of the table which includes Legs, top wooden frame and bottom tie members shall be made out of first quality rubberwood of approved make without knots and defects on all faces. Legs shall be provided of size 75mm(W) x 35mm((D) at the top side and 35mm(W) x 20mm(D) at the bottom. Bottom tray shall be made of 1.2mm thick MS sheet. Metal brackets shall be used for assembly purpose. Top: 8mm thick toughened glass with crystal edge polish finish. Construction: Knock down assembly.Wooden members shall be PU painted with hardness-2H. Metal components shall be powder coated. Bottom MS metal tray shall having floral pattern laser-cut. Top glass shall having sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush.` 44 `Supplying and placing in position of Corner Table. Overall size of the table shall be 500mm(L) x 500mm(D) x 425mm(H). Understructure of the table which includes Legs, top wooden frame and bottom tie members shall be made out of first quality rubberwood of approved make without knots and defects on all faces. Legs shall be provided of size 75mm(W) x 35mm((D) at the top side and 35mm(W) x 20mm(D) at the bottom. Bottom tray shall be made of 1.2mm thick MS sheet. Metal brackets shall be used for assembly purpose. Top: 8mm thick toughened glass with crystal edge polish finish. Construction: Knock down assembly.Wooden members shall be PU painted with hardness-2H. Metal components shall be powder coated. Bottom MS metal tray shall having floral pattern laser-cut. Top glass shall having sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush` 45 `Supplying and placing in position 6 Door Locker unit. Overall size shall be 375W x 470D x 1950H mm . Height shall be including of leveler which shall be 50mm H and possible adjustment shall be 15mm. Construction shall be knock down type. Legs shall be fitted with screw type leveler. Top, side, bottom, back panel and end cover shall be made form 0.5 mm CRCA sheet D Grade as per IS -513. Top bottom stiffner shall be made from 1.2mm CRCA sheet D Grade as per IS -513. Doors shall be made from 0.6mm thick CRCA (D Grade , IS -513). Soft closing hinge shall be provided. Door size shall be 373W x 18T x 314H. Shelve shall be a 10 bend panel made of 05 mm thick CRCA ( D Frade as per IS - 513) . Uniformly distributed load capacity of each shelf shall be 20 kg. 5 shelves shall be provided for 6 door locker unit. Lock shall be of cam lock with follwing specification : Oval knob that shall be function as a handle. Click action mechanism there. Key removal in locked and unlocked position. Zinc alloy die cast housing. Product shall be Green Guard (UL) certified.` 46 `Providing and Placing in position meeting Table. Overall size of the Table shall be 3600 W mm x 1500 D mm x 740 H mm. Top shall be made of 36mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and shall have chamfered edge. Plastic ABS access flap shall be provided for easy access to wires and cables. The Understructure shall be made of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile shall be used for connecting panels together. Modesty Panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip shall be provided below work surface to enhance aesthetics. It shall be made of 0.8mm CRCA as per IS 513, and shall be epoxy polyester powder coated (DFT 40-60 microns). Wire Management shall be an array of panels made of 0.8mm CRCA MS IS:513, and shall be epoxy polyester powder coated (DFT 40-60 microns) shall be used for flow of wires and cables. Provision to mount 6 module switch plate shall be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component shall be fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. Product shall be Green Guard (UL) certified..` 47 ` Providing and Placing in position High Back Chair. Overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer and inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, and hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Product shall be Bifma level 2 certified.` 48 ` Providing and Placing in position Chair for visitor. Overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114.0 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer and inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, and hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 60.1 D cm. The armrest top is molded from polyurethane and mounted on to adrop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Product shall be Bifma level 2 certified.` 49 `Providing and placing of panel and tile based modular workstations with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. Product shall be Bifma level 2 certified.` 50 `Supplying and placing in position Main Table and ERU of the following specifications.1650x1650x750 Primary Work Surface shall be Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with0.4mm PVC membrane pressed on to top.Softclosing access flap with in-build power box are provided on work surface for wire management.Secondary Work Surface shall be Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel shall be Made of 25mm thick MDF one side pre laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.understructure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.integrated pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction shall be BOX-BOX-FILE type which Uses powder coated 400 MM long metal. Panel Drawer Slides. Drawer extension shall be 325 MM.Drawers have a soft closing and anti slam mechanism.Handles shall be provided for ease of opening.Pedestal is provided with lock for security. Product shall be Green Guard (UL) certified.` 51 `Supplying and placing in position Revolving Chair. SEAT/BACK ASSEMBLY: The seat shall be made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat shall have extra thick foam on front edge to give comfort to popliteal area. The Back shall be injection moulded in glass filled Polypropylene which shall be upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat and back size shall be *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shal be moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range). Armrest top shall be mounted on Armrest structure made of glass filled Nylon· Armrest Top shall be PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism shall be designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. The complete headrest assembly shall be retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. Product shall be Bifma level 2 certified.` 52 `Supplying and Placing in position Visitors Chair. The cushioned seat assembly shall be made of injection molded plastic inner and outer. Plastic inner shall be upholstered with foam laminate fabric and moulded high resiliance polyurethane foam of density 45 plus /-2 per cubic metre and hardness load of 16 plus /-2 Kgf. Seat size shall be 46 cm W x 48 cm D. Thecushioned back shall be made of PU foam with insitu molded MS ERW round tube of size 1.9 plus /-0.03 x 0.16 plus /-0.0128 cm. it shall be upholstered with foam laminate fabric. Back size shall be 46.6 cm W x 59.6 cm H. The powder coated tubular frame shall be cantilever type and shall be made of 2.54 plus /-0.03 x 0.2 plus /-0.016 cm thick MS ERW tube. The back shall be connected to the frame through powder coated high pressure die cast connector piece.` 53 `Supplying a d placing in position of Almirah. Overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It shall have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It shall have a Mazak handle and Three way locking mechanism with Shooting Bolts. It shall have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It shall also have a M10 Screw type Leveller with Hex plastic base. The finishing shall be include Epoxy powder coated to the thickness of 50 microns ( plus /- 10). Product shall be Green Guard (UL) certified` 54 `Supplying a d placing in position activity table. Worktop shall be made from 18mm thk Pre-laminated twin board (E1/P2GRADE) with 1.3mm thk PVC lipping on all sides. Worktop corners shall be rounded for safe usage. Top fixing plate shall be of 5mm thk HR (IS2062) plate shall be used for fixing the worktop with the leg assembly. LEG ASSEMBLY shall be Dia 76.2mm x 1.2mm thk MS ERW Round tube (IS:7138) shall be Argo Welded with 5mm THK HR (IS:2062) plate on both ends. It shall be coated with min. 45 micron thickness of epoxy polyester coating. BASE PLATE - 8mm thk HR (IS:2062) sheet shall be Argo welded with Dia 20mm MS Rod Bushes and shall be coated with min. 45 micron thickness of epoxy polyestercoating. Set of castors with and without lock shall be used for ease of mobility of the table. Overall size of tha table shall be 834W x 750D x 583 H` 55 `Supplying a d placing in position chair. Seat back shall be made of blow molded High-density polyethylene and is fixed on the understructure assembly with the help of Stainless steel pop rivets. Seat shall be made of blow molded High-density polyethylene and is fixed on the understructure assembly. All side metal frames and cross connectors shall be made from Mild steel ERW Oblong tubes , 40 x 20 x 1.6mm thk as per IS:7138 which shall be welded together. The Welded structures and cross connectors shall be coated with min 45 micron thickness of epoxy polyester coating. Seat support channelshall be made of 1mm thk Mild steel sheet (as per IS:513) shall be welded to the understructure for fixing seat. The understructure shall be provided with fixed caps on front side and shoes with adjustable levelers on rear side that shall be fixed with the help of stainless steel pop rivets. The caps and shoes shall be injection molded in co-polymer Polypropylene . The levelers shall be injection molded in Nylon providing adjustability from 5mm to 10mm. Over all size of the chair shall be 473 W1 x 474 D1 x 334D2 x 722 H1 x 351 Seat Height (H2).` 56 `Supplying a d placing in position pouff seating The inner structure shall be made with a combination of 12mm thk Plywood (As per IS:303) and Pine-Wood members. It shall be covered from the sides using 2mm kraft-board. Complete understructure is made by gluing, nailing and stapling. Seat shall be made of 100 mm PU Slab-stock Foam pasted on top of this structure. The understructure shall be covered with a layer of 12mm PU Slab-stock Foam around the sides. The structure shall be upholstered with Leatherette on the sides and top. Over all size shall be 420Dia x 330 H.` 57 `Supplying a d placing in position cubby . Overall size shall be 1378W x 460D x 1556 Height with leveller. Construction shall be rigid knock down type. All side panels,top/bottom panels, and shelf panels shall be made from 18mm thick pre–laminated board of E1-P2 grade and approved shade confirming to IS 12823:1990 with 2mm thick PVC edge lipping. Back panel shall be made from 9mm thick pre–laminated board with 0.8mm thick PVC edge lipping.. Metal Frame : The Metal Frame shall be fabricated by Argo Shield welding of MS ERW Tube 40 mm x 20 x 1.2 mm thk (IS:7138) along with 3mm thk HR (IS 2062) L-shaped plate on both sides of the frame. Dia 28 MS Bar shall be used as a bush for supporting the levelers at the bottom of the frame. M10 leveler molded with Nylon-6 along with a circular powder coated aluminium extrusion shall be used for height adjustment upto 20mm. Name Tag shall be made out of Clear Polycarbonate is provided with 200 GSM paper. 12 nos. of fixed shelves shall be providded with 350 mm clear space. Uniformly distributed load capacity per each shelf shall be 24kg` 58 `Supplying a d placing in position activity table. Worktop shall be made from 18mm thk Pre-laminated twin board (E1/P2GRADE) with 1.3mm thk PVC lipping on all sides. Worktop corners shall be rounded for safe usage. Top fixing plate shall be of 5mm thk HR (IS2062) plate shall be used for fixing the worktop with the leg assembly. LEG ASSEMBLY shall be Dia 76.2mm x 1.2mm thk MS ERW Round tube (IS:7138) shall be Argo Welded with 5mm THK HR (IS:2062) plate on both ends. It shall be coated with min. 45 micron thickness of epoxy polyester coating. BASE PLATE - 8mm thk HR (IS:2062) sheet shall be Argo welded with Dia 20mm MS Rod Bushes and shall be coated with min. 45 micron thickness of epoxy polyestercoating. Set of castors with and without lock shall be used for ease of mobility of the table. Overall size of tha table shall be 834W x 750D x 763 H` 59 `Supplying and placing in position 4 door bookcase. Overall size shall be 914mm(W)x320mm(D x1742mm(H). The unique design shall provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism shall be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door shall be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The finishing shall include Epoxy powder coated to the thickness of 50 microns ( plus /- 10). Product shall be Green Guard (UL) certified.. ` 60 `Supplying and placing in position 3seater bench. The seat shall be a welded assembly of seat,back and side frame. The seat and back shall be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They shall be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel. The welded assembly shall be powder coated ( DFT 40-60 microns). The seat shall has a front water fall edge to provide popliteal clearance for comfortable seating. It also shall has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back shall aids in easy maintenance. The dimensions of seat shall be 47.8 cm (W) x 44.6 cm (D) and of back shall be 41.6 cm (W) x 23. cm (H). Understructure assembly shall consists of connecting beam and leg assembly made of M.S.E.R.W. oblong tube of size 7.5±0.03cm x5.0±0.03cm x 0.02±0.016cm thk.The welded structure assembly shall be powder coated (DFT 40-60 microns ).The leg assembly shall be fitted with shoes and levellers in Nylon. The leg structure shall be designed with minimal area of contact close to ground providing easy access for cleaning purposes. The shoes fiited to leg assembly shall help inaligning the structure for back to back arrangements. Levelers should take care of uneven flooring .Connecting beam shall be fitted with snap locking end cap.It also aids in side-by-side understructure alignment. Armrest assembly shall consists of armrest frame and armrest pad. The armrest frame shall be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it shall be powder coated (DFT 40-60 microns). Armrest pad shall be injection molded in Nylon and shall be fitted onto the armrest frame. Overall Dimensions shall be Seat Height - 44.1 cm, Height - 78.5 cm, Width and Depth of Chair as measured from pedestal - Width-169.5cm and Depth-63.8 cm.` 61 `Providing and placing in position double sided book rack: Overall Size shall be WxHxD - Double Body 1200W x 600 D x 2078HBody - Side panels, Frame and Cross L bracket are made using 0.8 mm CRCA (IS:513). The assembly shall consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles in each body. The tie rods shall be fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. Under Structure - Under structure shall be made of 0.8m CRCA (IS:513). b. Sizes of under structure for Double body : 1200W x 595D x 80H. Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). Shelf panels shall be placed on shelf support and then fixed using nut and bolts from below. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for eachunit. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- construction shall be Completely Knock down Finish- All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns. Label Holder -It shall be an aluminum extrusion of length 596mm for double body bookrack , fitted on to front of body. The Paper shall be 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper shall be 596mm for double body bookrack. Wooden panel of 25mm thk PLT, E1-P2 grade board for PLTr should be provided. Edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Product shall be Green Guard (UL) certified` 62 Providing and placing in position mattress. Mattress shall be of two layers foam mattress. Over all size of matress shall be1980 L x 914W x 125 H mm. Mattress cover fabric composition shall be polyster. 63 `Providing and placing in position Reception table. Work Surface shall be Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap along with a Gromett shall be provided on work surface for wire management Wire Management - Power box shall be made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 plus 3 Module cut out provision for Anchor Roma) which is fixed with worktop along the width at Access Flap position. Modesty Panel and Side Skirting shall be Made of 25mm Thick Pre laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure -Understructure shall be Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf shall be Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge DoorplusDrawer unit shall be Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom shall be made of 5.5thk MDF whiteboard. Handle shall be provided for ease of opening. HDU and Drawer shall be provided with cam lock for security. Wire Riser shall be made of 0.8mm CRCA (IS-513) shall be provided for proper wire management. Organizer Plateshall be made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook shall be made of 1.2mm CRCA (IS-513) is provided for bag hanging. Overall size of the table shall be 2400 Lmm x1770Dmm x740Hmm. Product shall be Green Guard (UL) certified.` 64 `Providing and placing in position Chair with Desklet. The seat and back shall be made up of injection moulded high impact strength polypropylene polymer with indoor gate UV resistance. The dimensions of Back shall be 51.6cm. (W) X 40.5cm. (H) and of seat shall be 52.5cm. (W) X 53.2cm. (D). The powder-coated (DFT 40-60 microns ) frame structure shall be made of 3.5±0.03cm x 1.5±0.03cm x 0.16±0.0128cm thk M.S. E.R.W. tube and welded connecting tube made of dia 2.22±0.03cm x 0.16±0.0128cm thk M.S. E.R.W. SQUARE tube to form the Mainframe assembly. The shoes shall be made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. The paper tray shall be made of dia 0.4plus /- 0.005cm M.S. rod which is spot welded to form a mesh typestructure. It shall be powder coated(DFT 50 plus /-10 microns). The size of the tray is 40.1 (W) x 36.1 (D) x 22.0 (H) cm. Product shall be Green Guard (UL) certified.` 65 Supplying, installing, testing and commissioning of gun metal chrome finished Ball Valve for Drain connection.50mm dia. 66 ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling (Mono Ammonium Phospate Powder) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose and Nozzle , confirming to IS:15683:2008. 67 Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, Co2 gas as per IS 15222 with controll discharge mechanism fitted with Hose and Horn applicable on Class B fire rating 21Bconfirming to IS: 15683:2008. CO2 Cylinder as per IS 7285 with ISI mark. 68 Signages with printed `IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE` of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm * 30cm and shall be fixed at the height of 2mts, from finished floor near Manual Call Points. 69 Floor indentification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. 70 Providing and fixing in position the signage of ` Fire Extinguisher ` to be pasted immediately above the every extinguisher. Sticker type 71 Providing and fixing in position the signage of ` Fire Hydrant and Hose Reel ` to be pasted on door of the every fire shaft at all floors. Sticker type 72 Supplying and fifing of fire brigade connection of cast iron body with gunmetalmale instantaneousinletcouplingscomplete withcapand chain asreqd. forsuitable diaMS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe 73 Supplying and fifing of fire brigade connection of cast iron body with gunmetalmale instantaneousinletcouplingscomplete withcapand chain asreqd. forsuitable diaMS pipe connection conforming to IS 904 as required :2 way - 150 mm dia M.S. Pipe 74 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.25mm Dia with 8mm rod size 75 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.32mm Dia with 8mm rod size 76 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.40mm Dia with 8mm rod size 77 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.50mm Dia with 8mm rod size 78 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.65mm Dia with 10mm rod size 79 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.80mm Dia with 12mm rod size 80 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.100mm Dia with 12mm rod size 81 Supply and fixing of following size sprinkler hanger with threaded rod , hanging rod , fasteners Rubber lining zinc plated suitable to hang follwing size sprinkler pipe as required.150mm Dia with 16mm rod size 82 4 w inlet breeching C.I. Body having 04 way gunmetal 63 mm male instantaneous conforming to IS:903, fitted with non return valves, flange outlet 280m OD, 240mm PCD, eight holes of 22 mm dia complete with gunmetal 25mm size. 83 Hose reel drum of swinging type with 19mm dia Rubber braided hose of 30m length with Ball valve and Shut off nozzle, complete. 84 Fire duct Shutter fabricated out ofM.S. sheet and frame, door shall be 600mm x 1200 mmx2100mm min. and fixed with 4 mm thick Glass, suitable Rubber beading and Locking arrangement. Quoted rate shall be includes all fasteners etc, and complete shutter shall be powder coated finish of red colour both inside and out side. 85 M.S. Hose cabinet stand/ wall mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beading) door and size of the cabinet shall be 600mm x 750 mm x 250 mm. Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated finish of red colour both inside and outside. 86 Supplying and fixing of approved make 25mm dia. automatic air release valve with unions etc. complete. 87 Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valveswith fittings of screwed end type.25mm nominal dia. 88 Supplying, installing, testing and commissioning ofM.S. puddle flenge complete with all accessories.150mm nominal dia 89 Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valveswith fittings of screwed end type.25 mm nominal dia ( Air vessel tank and Pressure switch manifold) 90 Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum sheeting and Pipe supports also. 91 Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for supporting suction and delivery pipe of each fire pump and delivery pipe to hydrant and sprinkler pipe within the pump room. 92 Supply and installation testing and commissioning of Pressure gauges of suitable range (0-16 bar), 100 mm diameter dial for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / reducers etc. 93 Providing, fixing, jointing and testing uPVC mineral filled floor traps of self cleansing design with water seal not less than 50 mm., with or without vent, jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirtentry..(Make..Supreme/Astral/Ashirvad) 94 `Providing and fixing health faucet with 1.2 m long flexible tube and wall hook including all fittings.(Make..Jaguar/Woyo/Hindware)` 95 `Providing and fixing water tank filling alram system complete in all respect as per entire satisfaction of engineer-in-charge(Make..Anchor/Goldmedal/SSM Aquamax)` 96 Providing and fixing25 mm dia motorize valve ..(Make..Leader /Honeywell/Zoloto) 97 Providing and Fixing of stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Floor Trap/Floor Drain)..(Make..Camry /Chilly/Neer)125 mm dia 98 INTERNAL SOIL, WASTE and VERTICAL RAIN WATER PIPEProviding and fixinguPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.(Make..Supreme/Astral/Ashirvad)40 mm 99 Providing and fixinguPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.(Make..Supreme/Astral/Ashirvad)50 mm 100 Providing and fixinguPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.(Make..Supreme/Astral/Ashirvad)110 mm,,,, 101 Providing and fixinguPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.(Make..Supreme/Astral/Ashirvad)150 mm 102 Providing and fixinguPVC pipe conforming to IS:4985 (10 kg/sq cm) including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge and as per layout.(Make..Supreme/Astral/Ashirvad)200 mm 103 Providing and fixing floor drainfixed with cement mortar complete in all respect...(Make..Supreme/Astral/Ashirvad)110 x 50 104 Providing and fixing 100 mm dia uPVC hopper approximately 300 mm long with maximum 3 inlets 32, 50 or 63 mm size fabricated from uPVC heavy duty pipes , sockets, fixed to UPVC trap withjoint and set in cement concrete mix 1:2:4 complete as per standarddrawing..(Make..Supreme/Astral/Ashirvad)100 mm dia 105 Providing and fixing 15mm flexible pipe 15 mm dia..(Make..Supreme/Astral/Ashirvad) 106 Providing and fixing water cooler of 2 kl in silver colour of stainless steel material complete in all respect as per the direction of engineer-in-charge ..(Make..Bluestar/Orient electric/Bajaj) 107 1`Supply, Installation, testing and Commissioningof modular type Variable Refrigerant Flow/ Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R407c/R410a/EQUIVALENT Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /-10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.- The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5...(MakeDaikin/Bluestar/Voltas/Mitsubishi)`1.1 NS-1 34 HP 108 `Supply, Installation, testing and Commissioningof modular type Variable Refrigerant Flow/ Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R407c/R410a/EQUIVALENT Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /-10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.- The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5...(MakeDaikin/Bluestar/Voltas/Mitsubishi)`36 HP 109 `Supply, Installation, testing and Commissioningof modular type Variable Refrigerant Flow/ Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R407c/R410a/EQUIVALENT Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /-10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.- The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5...(MakeDaikin/Bluestar/Voltas/Mitsubishi)`18 HP 110 `Supply, Installation, testing and Commissioningof modular type Variable Refrigerant Flow/ Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R407c/R410a/EQUIVALENT Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /-10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.- The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5...(MakeDaikin/Bluestar/Voltas/Mitsubishi)`36 HP. 111 `Supply, Installation, testing and Commissioningof modular type Variable Refrigerant Flow/ Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R407c/R410a/EQUIVALENT Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /-10%, 3Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required.- The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5...(MakeDaikin/Bluestar/Voltas/Mitsubishi)`32 HP 112 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless/corded remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 DegreeC DB and 19 DegreeC WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)0.8 TR 113 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless/corded remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 DegreeC DB and 19 DegreeC WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)1.3 TR 114 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless/corded remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 DegreeC DB and 19 DegreeC WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)1.6 TR 115 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless/corded remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 DegreeC DB and 19 DegreeC WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)2.0 TR 116 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless/corded remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 DegreeC DB and 19 DegreeC WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)2.6 TR 117 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless/corded remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 DegreeC DB and 19 DegreeC WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)3.2 TR 118 `Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibrationisolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230V±10%, 50Hz complete as required. The unit shall have automatic force shutdown provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.(MakeDaikin/Bluestar/Voltas/Mitsubishi)`6.4 TR 119 Supply, installation, testing and commissioning of following minimum capacity VRV/VRF Highwall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil ection with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shutdown provision in caseof fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature...(MakeDaikin/Bluestar/Voltas/Mitsubishi)1.0 TR 120 Supply, installation, testing and commissioning of following minimum capacity VRV/VRF Highwall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil ection with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shutdown provision in caseof fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature...(MakeDaikin/Bluestar/Voltas/Mitsubishi)AHU KIT..(Make Zeco/Edgetech/Avantec) 121 `Supply, Installation, testing and Commissioning of following capacities of ducted inline fans as per specification and complete with suitable 1 phase Motor with 3 speed control, bird screen etc. and required for complete installation include Lifting, shifting, assemblling and positioning of the equipment comprising of the following and complete as per specification/drawingsand as directed by Engineer InCharge.The fan casing shall be made of galvanised steel casing with min. 200 GSM zinc coating.The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point. Max. noise level shall be 65 dBA at 3.0 meter...(Make Kruger/Caryaire/Airflow)`250 CFM @ 8 mmWG ESP 122 `Supply, Installation, testing and Commissioning of following capacities of ducted inline fans as per specification and complete with suitable 1 phase Motor with 3 speed control, bird screen etc. and required for complete installation include Lifting, shifting, assemblling and positioning of the equipment comprising of the following and complete as per specification/drawingsand as directed by Engineer InCharge.The fan casing shall be made of galvanised steel casing with min. 200 GSM zinc coating.The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point. Max. noise level shall be 65 dBA at 3.0 meter...(Make Kruger/Caryaire/Airflow)`300 CFM @ 15 mmWG ESP 123 `Supply, Installation, testing and Commissioning of following capacities of ducted inline fans as per specification and complete with suitable 1 phase Motor with 3 speed control, bird screen etc. and required for complete installation include Lifting, shifting, assemblling and positioning of the equipment comprising of the following and complete as per specification/drawingsand as directed by Engineer InCharge.The fan casing shall be made of galvanised steel casing with min. 200 GSM zinc coating.The Fan must be selected for minimum power consuption and Maximum efficiancy at respective duty point. Max. noise level shall be 65 dBA at 3.0 meter...(Make Kruger/Caryaire/Airflow)`650 CFM @ 8 mmWG ESP 124 Y JOINT..(Make Kruger/Caryaire/Airflow) 125 `Supply and laying, testing and commissioning of following sizes of Copper conductor control cables through conduit on existing tray including fixing clamps and proper connections to equipments etc. complete as required. As per specification/drawingsand as directed by Engineer In Charge.....(Make Paramount/RR Kabel/KEI`2C x 1.5 sq.mm. 126 Supplying and fixing of powder coated extruded aluminium supply eye ball diffuser with aluminium volume control dampers as per specifications...(Make Airflow/Caryaire/Metal Joint 127 `SUPPLYING , INSTALLATION , TESTING and COMMISIONING OF 13 PASSENGER LIFTS HAVING 4 STOPS with all opening on the same sideFOLLOWING SPECIFICATIONSPassenger Elevator (Not less than 884 kg) elevator having speed of 1 meter per second Serving different floors in the existing lift shaft of size 1.8m x2.3mhaving stainless steel doo finish with a car dimension of 1400x1450x2300mm having central opening with door opening of 900x2100mm with DC door operator with monochrome LCD-Blue Background and white font. Complete in all respect as per Satisfaction of Engineer-in-charge.(Make: OTISJohnson,Schindler)` 128 Providing and installation of RFID based Automation Solution for Library Management System. Complete in all respect as per Satisfaction of Engineer-in-charge...(Make: Rapid Radio Solutions , Vast Electronic and Services , Rockwell Automation) 129 Providing and fixing of MUNSHIPREMCHAND LIBRARY in Acrylic Letters with light of 24` Height with power Supply and Warrenty of 2 yearswith fittings complete with all respect. 130 Providing and fixing ofLIBRARY in Acrylic Letters with light of 24` Height with power Supply and Warrenty of 2 yearswith fittings complete with all respect. 131 Providing and fixing of floor vinyl strickring 3m pasting on floorcomplete in all respect as per the entire satisfaction of engineer in-charge 132 Providing and fixing of 8mm Toughened Lacquered glasscomplete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 133 Providing and fixing of carpet flooring of 5MM thick with installation of 504 grey colour complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 134 Providing and fixing of Slim profile (25 MM X45MM) with monish black powder coating (Akzonobel 0.5 micron) with 10mm saint Gobine glass added with Gobian bar (16mmx16mm) black colour and milky film on clear glass with machine set ofGlass Max with warrenty of 5 years. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 135 Providing and fixing of terracota bricks of size 75x230x10mm as per design complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 136 Providing and fixing of signages of toilet of size 300x450mm as per design complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 137 Providing and fixing of signages of department names of size 600x1200mm as per design complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 138 Providing and fixing of signages of fire exitnames of size 800x300mm as per design complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 139 Providing and fixing of signages of drinking water / liftnames of size 300x300mm as per design complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 140 17.1.1 Supplying, installation, testing and commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. 141 17.1.2 Supplying, installation, testing and commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required. 142 17.1.3 Supplying, installation, testing and commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain and hammer assembly complete with glass and push button etc. as required. 143 17.1.5 Supplying, installation, testing and commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. 144 17.1.6 Supplying, installation, testing and commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc. complete as required. 145 17.1.8 Supplying, installation, testing and commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob and speaker/microphone enclosed in a M.S. (16 SWG)/ ABS box with break glass in front etc. complete as required. 146 17.1.9 Supplying, installation, testing and commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc. complete as required.6 Zone 147 17.1.11 Supplying, installation, testing and commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc. complete as required. 148 17.5.1 Supplying and laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring and LSZH outer sheath complete as required. 149 `Supplying, installation, testing and commissioning ofElectric driven Main Fire Pump suitable for automaticoperation and consisting of following, complete in allrespects, as required : (a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body and bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC,synchronous speed 1500 RPM, suitable for operationon 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads...2280 lpm at 70 m Head ... 2280 lpm at 70 m Head` 150 `Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel DrivenPump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thickaluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office redcolour etc. as required.M.S fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads....1620 lpm at 70 m Head` 151 `Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure,horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads...180 lpm at 70 m Head` 152 `Fabrication, supply, Insallation testing and commissioning of Electrical control panel of cubical construction, floormounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors,dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears andaccessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect,suitable for main fire pump, pressurisation pump and diesel pump set complete as per CPWD specificationwith following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :` 153 `Supplying, fixing, testing and commissioning of butterflyvalve of PN 1.6 rating with bronze/gunmetal seat duly ISImarked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :....100mm nominal dia` 154 `Supplying, fixing, testing and commissioning of butterflyvalve of PN 1.6 rating with bronze/gunmetal seat duly ISImarked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :....150mm nominal dia` 155 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange...200mm dia. 156 Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required. 157 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shadev as required. 158 `Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases,strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :..150mm dia. ` 159 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.200mm nominal dia ` 160 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.150mm nominal dia ` 161 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.100mm nominal dia ` 162 `Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steelcoupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blankGunmetal/Stainless Steel cap and chain as required :..Single headed Gunmetal` 163 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :..Gun Metal 164 Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneousconnection to interconnect hose pipe coupling as required :...Gun metal 165 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.80mm nominal dia ` 166 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.65mm nominal dia ` 167 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.50mm nominal dia ` 168 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.40mm nominal dia ` 169 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.32mm nominal dia ` 170 `Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.25mm nominal dia ` 171 Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :...Pendent Sprinkler 172 `Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steelcomplete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required...700mm` 173 Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required..150mm Dia 174 Supply, Installation, testing and commissioning including vaccumiazation andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required. 175 Supply, Installation, testing and commissioning including vocalization andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastomeric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required. 9.5mm dia 176 Supply, Installation, testing and commissioning including vocalization and Nitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for DX/VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required. 12.7 mm dia 177 Supply, Installation, testing and commissioning including vaccumiazation andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required 15.86 mm diameter 178 Supply, Installation, testing and commissioning including vaccumiazation andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required19 MM DIA 179 Supply, Installation, testing and commissioning including vaccumiazation andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required 22.2 mm dia 180 Supply, Installation, testing and commissioning including vaccumiazation andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required.25.4 MM DIA 181 Supply, Installation, testing and commissioning including vaccumiazation andNitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerantpiping for DX/VRV/VRF system, complete with fittings, with suitable adjustablering type hanger supports, jointing/ brazing including accessories, insulated withXPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrilerubber tubular sleeves sections of specified thickness as given below for Suctionand Liquid lines, all accessories as per specifications etc. as required : 25.58mm diameter 182 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for DX/VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 31.8 mm dia 183 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for DX/VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 34.9 mm dia 184 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for DX/VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 38.1 mm dia 185 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/ hard drawn copper refrigerant piping for DX/VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing including accessories, insulated with XPLE Class-O tubular insulation/ with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 41.3 mm dia 186 Supplying, installation, testing and commissioning of duct damper complete withneoprene gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications... 187 Supplying and applying of following thickness duly laminated foil of mat finish closed cell Nitrile Rubber (Class O) thermal insulation on ducts after applying suitable adhesive. The joint shall be sealed with 50mm wide and 3mm thick self adhisive nitrile rubber tape insulation completer as per specs and as required.9 mm thick 188 Supply and fixing of acoustic lining of supply air duct initial minimum 3mtr length from each AHU / TFA using 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI secton of 1.25 mm thick at 600 mm centre to centre covered reinforced plastic tissue paper and 0.5 mm thick perforated al. sheet fixed to inside surface of duct with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required. 189 Supply, installation, testing and commissioning of factory built floor mounted DXtype double skin type horizontal air handling unit made of 25mm thick panelsconsisting of pre plasticised G.I. casing of thickness 0.8mm outside layer and0.8mm inside layer with PUF insulation factory injected between them, thermalbreak profile complete with blower section with blower suitable for static pressureas required, min 2 bend GSS/PVC eliminators, cooling coil section withaluminium finned copper tubes (tubes thickness not less than 0.5 mm) coolingcoil 8 RD, filter section with washable synthetic air prefilter, belt drive packagewith TEFC drive motor of eff class IE3 suitable for 415 ± 10% volts, 50Hz, 3 PhaseAC supply suitably designed for VFD, drain connections, 18G SS drain pan with19mm nitrile rubber insulation, necessary vibration isolation arrangement etc.complete as per specification and following capacities. 190 Providing and fixing customize Wisteria Feather Paper Wall coveringin non-woven paper having width of 108 inches of 260 GSM as per design complete in all respect as per the entire satisfaction of engineer in-charge (Make: Nilaya , Ekvin Decor, Jaypore) 191 Providing and fixing of wooden polymer composite panel and WPC Louvers of size 160 x 2900 x 8.5mm as per design complete in all respect as per the entire satisfaction of engineer in-charge(Make: Alstone , Fairflow , Duraflo) 192 Providing and fixing 50mm Wooden Blinds with single cord operator complete with all respect.. 193 Providing and fixing of grafity on wall as per design complete with all respect as per the direction of engineer-in-charge 194 `Providing and Fixing of Envirotech Systems Acoustical Sound Suspenders™ made of Acoboard™ and Woodperf™Acoustic Panels for achieving the best NRC Value up to 0.90. Size of the Acoustical Sound Suspenders™1200*300*30mm. Construction details are as follows 9mm thick Acoboard fixed over 12mm thick Woodperf Acoustic Panels both the sides with rigid fixation. Design of the Acoustical Sound Suspenders as per the size (1200*1200*30mm)with Top and bottom side flat. The Acoustical Sound Suspenders™ marked with hanging arrangement on the rear sides, each Clouds having distancing from each Clouds as per the design intended to the architect. The Suspenders to besuspended over required accessories loike Uni strut channel using the locking Clip tied by Thread rod or Hanger Wire kit, cable finishing hook. Acoboard and Woodperf Panels are Certified by GRIHA V.2019 criterion: 11, GRIHA V.2015 criterion: 11 and GRIHA V. 3.1 criterion: 29. Installation of the Sound Suspenders as per the instruction lay Down By the manufacturer as per design complete with all respect . as perthe entire satisfaction of engineer in-charge ` 195 Providing and fixing of 6mm Toughened glass comply with the requirement of BS EN 572 parts 1,2 and3 or ASTM C1036 assessed for optical and visual faults as described in BS EN 572-2. Spot faults to be no worsethan category C. There will be no linear /extended faults. Optical faults to be within the limits set in BS EN 572-2 of model no. ET 150 Toughened glass complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. 196 Supplying and fixing of powder coated extruded aluminum door transfer grilles without aluminum volume control dampers as per specifications. 197 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of requiredshade complete as required :.100 mm nominal dia 198 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on thewall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of requiredshade complete as required :.150 mm nominal dia 199 Supply, installation, testing and commissioning of 27` All-in-One Desktop-computers 13th Gen Intel® Core™ i7, Windows 11, microprocessor, 16 GB RAM, 1 TB SSD, Windows latestembedded OS and SQL Data Base, serial Interface port,USB Ports, compatible display card,keyboard, Mouse. (Make :- Dell / HP/LENOVO) 200 Providing and installation of Efficiency Engineered - A3 Refill Ink Tank Printer with A3,A4, A5 tray with Wireless and Ethernet Connectivity, Automatic 2-sided Colour Print,Professionally Designed for Fast Print Speeds, Low Cost High Photo Quality with UltraHigh Yield Ink Bottles, Wi-Fi Direct, Mobile and USB Print Complete in all respect as perSatisfaction of Engineer-in-charge..(Make: HP, Brother, Canon) 201 Providing and installation of Laserjet A4 Black and White Printer with scanner ,wifidirect. Complete in all respect as per Satisfaction of Engineer-in-charge...(Make: HP,Brother, Canon) 202 Providing and installation of Laserjet A4 Black and White Printer with scanner ,wifidirect,fax with auto front and back paper print technologyComplete in all respect as perSatisfaction of Engineer-in-charge...(Make: HP, Brother, Canon) 203 Deduct - Credit of half brick bats / brick malba 204 Deduct - Recovery Of 80mm Old Interlocking Paver Blocks.

INR 21000 /-

INR 8.06 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB