Construction Of Way Side Amenities At Kaleshwar Mahadev, Kunha, District Kangra, Himachal Pradesh” (Sh: - Civil, Ws & Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.)Ocb/ Contract Package Invitation For Bids No. Sitdp-Hp_W15/2025-26/, Kangra-Himachal Pradesh

TDR : 50725274

Tender Notice
BOQ

Expired

Kangra , Himachal Pradesh

Tender Brief : Construction Of Way Side Amenities At Kaleshwar Mahadev, Kunha, District Kangra, Himachal Pradesh” (Sh: - Civil, Ws & Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.)Ocb/ Contract Package Invitation For Bids No. Sitdp-Hp_W15/2025-26/

Document Fees
₹ 5000 /-

EMD
₹ 2430000.0 /-

Tender Value
Refer document

Submission Date
17-09-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil WorkEarth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth at approved dumping site by mechanically & manual upto all lead & liftas per direction of Engineer incharge, dumping site/disposal site shall be arranged by the contractor at their own cost and nothing shall be paid extra.All kinds of soil
2	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth at approved dumping site by mechanically & manual upto all lead & liftas per direction of Engineer incharge, dumping site/disposal site shall be arranged by the contractor at their own cost and nothing shall be paid extra.
3	Oridinary rock
4	Hard rock (blasting prohibited)
5	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil at approved dumping site by mechanically & manual upto all lead & liftas per direction of Engineer incharge, dumping site/disposal site shall be arranged by the contractor at their own cost and nothing shall be paid extra.All kinds of soil
6	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil at approved dumping site by mechanically & manual upto all lead & liftas per direction of Engineer incharge, dumping site/disposal site shall be arranged by the contractor at thier own cost and nothing shall be paid extra.Ordinary Rock
7	Stone /Boulder filling under floor dry hand packed including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
8	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
9	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters, including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
10	Filling in plinth with sand under floors including watering ,ramming, consolidating and dressing completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge..
11	Providing and laying brick bat filling in foundation andplinth including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
12	Providing and laying in position cement concrete 1:1½:3 (1 Cement: 1½ coarse sand) : 3graded stone aggregate 20 mm nominal sizeexcluding the cost of centering and shuttering completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. - All work up to plinth level:
13	Providing and layingcement concretemechanically mixed curing completeexcluding cost of form work in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer Incharge.1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
14	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.- All work up to plinth level : --- (a) 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
15	Providing and laying Cement Concrete 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer Incharge.
16	Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
17	Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oilincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
18	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smoothincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
19	Centering and shuttering including strutting, propping etc. and removal of form forincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. :
20	Foundations, footings, bases of columns, etc. for mass concrete
21	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
22	Suspended floors, roofs, landings, balconies and access platform
23	Lintels, beams, plinth beams, girders, bressumers and cantilevers
24	Columns, Pillars, Piers, Abutments, Posts and Struts
25	Stairs, (excluding landings) except spiral staircases
26	Edges of slabup to 20cm width
27	Providing and laying Steel reinforcement TATA/Jindal/ SAIL for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto Alllevel.Thermo-Mechanically Treated bars of grade Fe-500D or moreincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
28	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durabilityincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
29	All works upto plinth level.
30	All works above plinth level upto floor V level
31	Providing weep holes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
32	Backfillingwith hard stones of approved qualityincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
33	SecondClass Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizesincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. : ---- (a) Cement mortar 1:6 (1 cement : 6 coarse sand).
34	Second Class Half brick masonry with common burnt clay F.P.S. (non modular) bricks of 2nd class designation 7.5 in superstructure above plinth level up to floor V levelCement mortar 1:4 (1 cement :4 coarse sand)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
35	Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonryincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
36	Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade using Red Stoneincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
37	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 6 mm nominal size)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. and finished smooth.whiteAgaria Marble Stone
38	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.Second class Deodar wood
39	Providing and fixing 35 mm thickpanelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.(Note:- Butt hinges and necessary screws shall be paid separately inincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. Second class deodar wood
40	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shuttersincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.)
41	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screwsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (35 mm thick shutters)
42	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
43	Providing and fixing Keyless mortice door locks on toilet doors of godrej or equivalent100 mm with 6 levers and a pair of lever handles of approved quality with necessary screws etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
44	Providing and fixing Stainless steellatchhandlesheavy duty ( ISI )Mark of approved quality with necessary screws etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
45	Providing and fixingStainless steelhandlesincluding necessary screws completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
46	150mm
47	125mm
48	Providing and fixing Stainless steel Tower boltheavy duty ( ISI )Mark of approved quality with necessary screws etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
49	300x10 mm
50	200x10 mm
51	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Fixed to openings /wooden frames with rawl plugs screws etc.)
52	Providing and fixing ISI marked, Stainless steel heavy duty hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Twin rubber stopper)
53	Providing and fixing tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
54	Providing and fiing ALUK aluminiumcurtain wall glazingsystem (SL50)with GI unit(minsulated Glass Unit) for visionpannel and spandrel panel of approved make the mullionsand transoms are squre cut and assembled using a combination of factory fitted cost facefixed junction spigots and concealed anti ratation spigos. or by transom blocks. This strongconstruction is easy to fabricate and allowa greater accuracy and enhanced stability . High qualityconstruction .The mullion jointing uses a speciallydesigned sleeve spigot for each mullion for a high quality joint. Cost efficiency.All machine operations can be performed on drill jigs with punch tooliing fordrainage toreduce fabrication timeand cost and achieveconsistent quality and all extruded aluminium sections towithstand wind pressure of 150kg/sqmat all height and fabricated fixed at all levels, elevation and heightsto the masonry/RCwalls withnecessary clamps , brackets and anchor fasteners , Glass will be fixed withwith pressure plate ad cap at every vertical and horizontal grooves .All clamps and brackets shall be mild steel Hot dip galvanised minium80 microns thick.The extruded aluminiumsection shall be Powder coating of minimum60 microns . Any other fastening straps , nuts, bolts, washers shall be of HILTI or Fischer make or approved eq. and of SS 304 grade.Rate shall be include to provide Fire stops at all floorlevels. EPDM gaskets, open cellpolyethylene backer rodsetc. The structural glazing sealant shall be Dow Coming and weather sealant shall be Dow Coming including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. All sealants shall be black in colour.
55	Proviidingand fixing FixedCum Door( 1000x2440mm) area 2.44 Sqmmade of Aluk45DSSingle leaf, out Hinge L Powder Coating fabricationwith glazing1x24mm( 6+12+6)
56	Providing and fixing Door ,FixedCum Door( 2000x2440mm)Single Leaf +Fix) made of Aluk45DSSingle leaf, out Hinge L Powder Coating fabricationwith glazing2x24mm( 6+12+6)
57	Proviing and fixing FixedCum Door( 2000x2440mm)Single Leaf +Fix) made of Aluk45DSSingle leaf, out Hinge L Powder Coating fabricationwith glazing2x24mm( 6+12+6)
58	Proviing and fixing Window ( 2132x2210mm)Single Leaf +Fix) made of Aluk45DSPowder Coating fabricationwith glazing2x24mm( 6+12+6)
59	Proviing and fixing window ( 2949x2210mm)made of Aluk45DSPowder Coating fabricationwith glazing2x24mm( 6+12+6)
60	Proviing and fixing window ( 5580x2210mm) madeof Aluk45DSPowder Coating fabricationwith glazing4x24mm( 6+12+6)
61	Proviing and fixing window (500x940mm) madeof Aluk45DSPowder Coating fabricationwith glazing1x24mm( 6+12+6)
62	Proviing and fixing window (1000x940mm) madeof Aluk45DSPowder Coating fabricationwith glazing4x24mm( 6+12+6)
63	Proviing and fixing window (3000x2210mm) madeof Aluk45DSPowder Coating fabricationwith glazing2x27 mm( 6+15+6)
64	Proviing and fixing window (2500x2440)mm) madeof Aluk45DSPowder Coating fabricationwith glazing2x27 mm( 6+15+6)
65	Proviing and fixing window (2500x1440)mm) madeof Aluk45DSPowder Coating fabricationwith glazing2x27 mm( 6+15+6)
66	Proviing and fixing window ( 900x600mm madeof Aluk45DSPowder Coating fabricationwith glazing1x24 mm 6+12+6)
67	Structural steel work TATA/SAIL/Jindalriveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
68	Steel work welded in built up sections TATA/SAIL/Jindal / framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works)
69	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
70	Providingandfixingstainlesssteel(Grade304)railingmadeofHollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nutsandboltscomplete,i/cfixingtherailingwithnecessaryaccessories& stainless steel dash fasteners , stainless steel bolts etc., of required size, on the topofthefloororthesideofwaistslabwithsuitablearrangementasper approvalofEngineer-in-charge,(forpaymentpurposeonlyweightofstainless steelmembersshallbeconsideredexcludingfixingaccessoriessuchasnuts, bolts, fasteners etc.)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
71	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 4 (1Cement : 4CoarseSand)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
72	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
73	52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer\"s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
74	Providing and laying 12mm thick vitrified floor tiles in different sizeswith water absorption less than 0.08% and conforming to IS: 15622, of approved make like KAJARIA,NEXON,NITCO,STANZA, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. -- Size of Tile600X600 mm
75	Providing and layingLapttoGranite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specifiedincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
76	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. -- Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
77	Providing and fixing Ist quality 8mm thick ceramic glazed wall tiles conforming to IS: 15622 of approved make like KAJARIA,NEXON,NITCO,STANZA of size 600 x 450 mm , in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
78	Prov. & Fixing 10 mm thick Unistone/durostonecladding Tiles with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement Complete as per the directions ofEngineer / Architect. ( Extra work in temple area)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
79	Providing and laying Inter locking paver block 80mm thick ( N.T.C) or eqivalent make heavy duty precast pre-polished cement conrete inter locking paver blocks vibro compacted including border or kurb block grey or coloured of approved shade, size and quality over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub-base concrete floor to be paid for seperately 60mm thick inter locking blocks including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
80	Providing andfixing 15 cm wide, 45 cm overallsemi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
81	10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar with bhusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with machine moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neatincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690)
82	Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to aheight of 5 m above floor level, over glavanised steel work frame including necessary fitting and fixturesin between and reinforced with rabbit wire mesh fixed to wooden frame including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
83	1 Flat surfaces
84	Curved surfaces
85	Providingand layingwork in sunk or raised mouldings in the plaster of Paris(Gypsum anhydrous) ceilingincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
86	Providing 15 mm cement plaster on the rough side of single or half brick wall of mix: as Per Direction of Engineer Incharge for Heights and all levels & all locationsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. 1:6 (1 cement: 6 fine sand)
87	Providing 6mm thick ceiling cement plaster of mixincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. 1:3 (1 cement: 3 fine sand)
88	Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materialsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
89	PaintingASIAN/Nerolac with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (a) Two or more coatson new steel workover an under coat of suitablesteel primer of approved brand and manufacture)
90	Painting ASIAN/Nerolac with synthetic enamel paint of approved brand and manufacture to give an even shadeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. : (Two coat over new wood and wood based surfaces after andincluding preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting.with Ready-mix paint brushing with white lead for priming (Asian or Nerolac)
91	PaintingASIAN/Nerolacwith enamel paint to give an even shade on new wood and wood based surfaces/materials including cleaning the surface of dirt , dust and other foreign matter, sand papering and stoppingwith Readymixed paint other then whiteincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Painting two coat excluding priming coat with enamel paint to give an even shade on new wood.)
92	Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops dust, loose materials and other foreign matter sand papered smoothto give final finish to the surface complete up to all floor levelincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
93	Wallpaintingwithacrylicemulsionpaint,havingVOC (Volatile Organic Compound)contentlessthan50grams/ litre,ofapprovedbrandand manufacture,includingapplyingadditionalcoatswhereverrequired,to achieve even shade and colourincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Two coats)
94	Providing and applying primerof approved brands / Asian/ Nerolacovera prepared basze of puttyto prepare the surface even and smooth completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
95	Providing , fixing & applying POP false ceiling consisting of frame G.I. channel main, cross and L & hanging member of heavey qualitysize % shape with wiire gauge mesh. Apply P.O.P. to the expended metal of thickness 12mm thick finishing smooth to line & level including edge, moulding as per drawing anddesign including carriage of material with all lead & lifts, complete to the entire satisfaction of architect, as per engineer incharge etc including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
96	Structural steel work in single section, Supply and Erection of M.S. Insert Plates & Channels for support 10 to20mm thick including drilling holes, nut bolts & rivets, fabrication etc.
97	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubesincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
98	Providing and fixing 0.60 mm thick pre-painted steel sheet (Tata Make/century) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with self driven steel screws / pre-painted iron J or L hooks or seam bolts with pre-painted limpet and rubber washers complete with all accessories as required and as per the detailed drawingsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
99	Providing and fixing ridges or hips 60 cm overall with 0.60mm thick preprinted steel sheets in roofing (TATA /Century ) with hot dipped metallic zinc / zinc aluminium alloy coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks / self-driven screws, bolts & nuts 6mm dia & preprinted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.including carriage of material up to all lead & lift and as per direction of Engineer In charge.
100	Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coatingback coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
101	Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design.
102	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
103	Providing and fixing M.S BP Sheet 1.66mm to 2mm thick (Tata/SAIL or Jindal make) in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge (Tata Make/century)
104	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard designincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (With 20x20 mm square bar )
105	Supplying and fixing cast iron cover with frame for man holes for frame of internal rectanguler CI cover (light duty single seat pattern -I) the weight of cover to be not less than 23 Kg and of frame not less than 15 kg, including carriage of material upto all leads and lifts and as per direction of Engineer incharge. (Supplying and fixing cast iron cover with frame (total weight 38kg) for man holes for frame of internal dimension 610x610mm rectanguler CI cove)
106	Providing and fixing Hawan Kund complete including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
107	Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2024,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinc+High abrasion resistant Polymer coated, Mesh wire diameter 2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, Polymer coated wire mesh, when subjected to neutral salt spray test in accordance with ISO 9227, after 20,000 hours of exposure the mesh should not exhibit more than 5% Dark Brown Rust (DBR) and polymer should be resistant to abrasion after 300 cycles and shall not expose metal wire.(The third-party testing for abrasion resistance of polymer coating on mesh must be accredited and verified by reputed IIT/NIT in strict accordance with procedure outlined inIS 16014:2024). Confirming to codes in vogue, as per designincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
108	Supply and installation of Gabion/ Revet mattresses having thickness of 0.3 m made of mechanically woven, double twisted, hexagonal shaped wire mesh, Mesh type 6x8, with integrated double partition & prefabricated vertical - Ties, fixed with C rings, Zn + 10% Al alloy+ High abrasion resistant polymer coated wire, with minimum punch strength of 21kN & minimum tensile strength of 37kN/m, conforming to working life >120 years in C3 (Medium Aggressive) site environment level (in accordance with ISO 9223, Table 1). The permissible tractive shear force values shall be based on third party testing as per ASTM D6460 test methodology. For 0.30m thick mattress, permissible shear stress shall be 637N/mm2. Polymer coated wire mesh, when subjected to neutral salt spray test in accordance with ISO 9227, after 20,000 hours of exposure the mesh should not exhibit more than 5% Dark Brown Rust (DBR) and polymer should be resistant to abrasion after 300 cycles and shall not expose metal wire. (The third-party testing for abrasion resistance of polymer coating on mesh must be accredited and verified by reputed IIT/NIT in strict accordance with procedure outlined inIS 16014:2024), having D=60mm with tolerance of +/-10%, wire dia. ID/OD 2.2/3.2mm, mechanically edged/selvedge with partition at 1 m interval etc complete as per IS:16014:2024, IRC: SP-116:2018& MORTH -Specifications for Road & Bridge Works: Section 2500, & as per detailed technical specifications(Cost for supply of Boulder at work spot shall be payable as Extra)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
109	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
110	Design , Supply & Supervision & Installation Of Reinforced Soil Wall /Slope Structure As Per Bs 8006 And Fhwa Nhi-00-043, Comprising Of Facia Material As Per Is 16014, Reinforcing Element Bba Certified Geogrids, Geotextile Etc Complete. The Item Shall Include But Not Limited To The Following:ForParamesh Wall/Slope Height 0-4Mincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
111	Design , Supply & Supervision & Installation Of Reinforced Soil Wall /Slope Structure As Per Bs 8006 And Fhwa Nhi-00-043, Comprising Of Facia Material As Per Is 16014, Reinforcing Element Bba Certified Geogrids, Geotextile Etc Complete. The Item Shall Include But Not Limited To The Following: ForParamesh Wall/Slope Height 0-6.4Mincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
112	Supplying and installation of polyester needle punched non-woven geotextileas filter media for placing behind the Gabions and Gabion facia units as per MoRTH 700 Type-III geotextile, The width of geotextile roll shall not be less than 4.5m Completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
113	Supplying and installation of polypropylene needle punched non-woven geotextile as filter media below gabion mattress, as per MoRTH 700 Type-I geotextile. The width of geotextile roll shall not be less than 4.5 m Completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
114	Supply and installation of Self Drilling Anchors (32mm dia., yield load>230kN) with attached sacrificial drill bit, nut, washerplate200x200x10 mmm size, coupler for connecting bars, with suitable corrosion protection coating for bar and accessories and full length groutingwith admixture including all ancillary works for soil nailing/top/bottom/surface anchoring including all ancillary material, machinery, Labour etc. as per detailed technical specificationsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
115	Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member.Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compactingand SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrumentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (50mm thick in Grade M 25 with cement content not less than 330 kg per cum)
116	Land Scaping:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth at approved dumping site by mechanically & manual upto all lead & liftas per direction of Engineer incharge, dumping site/disposal site shall be arranged by the contractor at their own cost and nothing shall be paid extra. (All kinds of soil)
117	Supplying and stacking of good earth at site including royalty and carriage upto 100metres on head lead and 1 km. By mechanical transport (earth measured in stacks will be reduced by 20% for payment)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Good earth)
118	Supplying and stacking at site dump manure from approved sources (duly screened through specified sieve) including carriage upto 100 metres on head load and 1 km. By mechanical transport (manure measured in stacks will be reduced by 8% for payment)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
119	Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetationincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
120	Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid separately)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
121	Mixing earth and sludge or manure in proportion specified or directedincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
122	Grassing with \"Selection Grade-1 including watering andmaintenance of the Lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if neededincluding carriage of material up to all leads and lifts and as per direction of Engineer in charge.
123	In rows 15 cm. Apart in either direction.
124	In rows 7.5 cm. Apart in either direction.
125	In rows 5 cm. Apart in either direction.
126	Preparation of beds for hedging and shrubbery by excavating upto 1.5 metre depth and trenching the excavated base to a further depth of 30cm. Refilling the excavated earth after breaking clods and mixing with sludge or manureia the ratio 8:1 (8 parts of stacked. volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8% flooding with water, filling with earth if necessary, watering and finallyfine dressing levelling etc. including stacking and disposal of materials declared un-serviceable and surplus earth by spreading and levelling as directed with in a lead of 20 metres and lift upto 1.5 metre complete.Notes:- Earth work in excavation to be paid vide item no 07040000 depending upon classification of soil. ii) Cost of sludge, manure or extra earth to be paid for separatelyincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
127	Digging holes to specified/standard size of pit for plantation in soil and stacking the excavated soil near by the pits and then refilling the same with the excavated earth/good earth mixed with manure in the ratio of 2:1 by volume (2 parts of stacked volume of earth aftereduction by 20% 1 part of stacked volume of manure after deduction by 8% flooding with water dressing etc. complete as per requirement and direction of Engineer in charge including cost and carriage of good earth and manure up to all lead and lift through manual &mechanical meansincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
128	Half brick circular tree guard in second class bricks, internal diametre 1.25m, and height 1.20m. above ground and 0.20m. Below ground bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement: 6 sand) and the intermediate courses beingin dry honey comb masonry as per design completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
129	Providing and fixing M.S. Flat iron tree guard 60 cm. Dia, and 2 metre high above ground level, formed of 4 Nos. 25x6mm.and 8 Nos. 25x6mm vertical M.S. Flats riveted to 3 Nos. 25x6mm M.S. flat iron rings in twohalves, bolted together with 8 mm. Dia and 30mm. Long bolts including painting two coats with paint of approved brand and manufacture over a coast of priming complete in all respectsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
130	Edging with second class bricks laid dry length-wise including excavation refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 20 metresincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
131	Filling of earth work and sludge or manure in the desired proportion in trenches, floodingwith water and levelling of supplying earth and sludge or manure and mixing excludedincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
132	Supplying and planting of following trees category A of the given sampling including take proper care and necessary maintanance for a period of four months from the date of planting complete as specifiedincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
133	Bottle brush
134	Mountain Ebony
135	Dahlia (Multicoloured)
136	Supplying and planting ofshrubs/Hedgesas approved including take proper care and necessary maintanance for a period of four months from the date of planting complete as specifiedincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
137	Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
138	Providing , installation ,testing and commissioning of drinking water cooler of Model SDLX150Blue Star 150 litreor equivalent brand ,stainless steel body ,and in built purification systemcompleteincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
139	Providing and fixingSWB70L-3C Touchless Trash Bins TRIO AUTO BINS Stainless Steel 304 DustbinCapacity - 30 LitresDimensions - LxWxH 61 x 25.4 x 25.4 Centimetersincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
140	Providing and fixing C.I. (Cast iron benches Super deluxe bench based on approved of with wooden/brown/yellow colour. Stand/legs made up of decorative cast iron material for mounting, 15 inches in width and weighing approximately 85kg complete including the cost towards loading/ unloading transportation fixing if applicable at siteincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
141	Providing and fixing Shiv Pariwar Statue full granite ( 10ftht, 7ft wide and 3ft thickness)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
142	Providing and installation and commissioning ofwater falls and 9 Nos foaming Bubblers in each set with the following specifications.SAND FILTERS 650MM DIAAQVASTAR: Supply of Top mount double inflow diffuser, gilter glass commercial sand filter, inner dia 650 mm dia, bed depth 295 mm and filter area of 13 cum / LPH of Make AqvastarMULTI-PORT VALVE, Aqvastar :-6 way Multi-port valve, manual operation, Make AqvastarFILTER MEDIA :Gravel and sand media for 650 mm dia filter.SELF PRIMING 1.5 HP PUMP: Supply of Horizontal multistage self priming centrifugal pumping set of 1.5 HP, Single Phase, of Make AqvastarPUMP FOR TRICKLING WATER FALL:Imported Little Pump 500 Watt Model No HDS-5033 made in Italy .FOAMING BUBBLER NOZZLE18-:Imported European Foaming Bubbler nozzle stenless steel grade 304 Fountain Nozzle made of stenless steel grade 304 & inner part of ABS Plastic Inlet size 1\"SWING JOINT :Swing Joint 1” Size Brass Made complete in all respect Make KMC INDIACONTROL VALVE : Brass Control valve 1” ISI MarkFABRICATED WATERFALL CHANNEL:- Stenless Steel Febricated Channal for Waterfall size 6\"Length , 4\"width & height 12\" made of Stenless Steel sheet S.S. 304 Grade with argion welding.Electrical Control Panel Board: Supply of Suitable electrical panel including making necessary connections for running the following pumps with a provision of contractors, push buttons, connection strips, fuses, indicating lamps of reputed make such as L&T/Siemens/AE/Crompton/E.E. or equivalent make complete in all respects.Underwater LED Light (12V 6W):- High Reflected Low Consumption single Color Under Water LED Lights 12 V, 6 Watt , IP 68, Size :- dia 70 m, height 100 mm High Quality Aluminum pressure die casting Body, surface oxidated coating with heat resistant and tempered Glass, High quality transparent silicon Epoxy filled inside the Light to protect from heat & Water. Make CREE USALED Light (12V 10W):- LED Lights 12 V, 10 Watt , fallselling COB Light Make PhillipsUnderwater LED Light (24V 24W)Underwater24V, 20 Watt, High reflection, low consuption miro-processor based LED light with inbuilt heat resistance sensor, made of Stainless Steel grade 316 Make Cree USACOBE LIGHT :- High reflection, low consuption miro-processor based COBE light 10 watt/per mtr with Imported ABS Channel.Light Stand:- Stanless Steel SS 304 Grade Light Stand Provision of 3 Nos Light each stand.POWER SUPPLY: Power Supply ( SMPS) for the requried capacity (12V 100 W) of LED Light . Make Mean wellPOWER SUPPLY : Power Supply ( SMPS) for the requried capacity (24V 100 W) of LED Light . Make Mean wellCABLE FOR LIGHT : 1.5 mm 2 core cable ISI mark with conduit pipe. Make - KEI INDIACABLE FOR PUMP : 2.5 mm 3 core cable ISI mark with conduit pipe. Make -KEI INDIABALL VALVES : 63 mm PVC Ball valves AqvastarNON RETURN VALVES : 63 mm PVC Non return Valve AqvastarMAIN DRAIN: ABS Main DrainCOMPLETE PLUMBING WORKComplete plumbing material in PVC pipe 6 kg/10 kg cm2 ISI mark complete with all required accessories TEE, bend, reducer, socket, solvent etc Make Finolex/Supremeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
143	Providing and fixing sign board at different places in temple areaas shown in the location planincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
144	Providing and fixinghigh pressure CPVCSpigot and socket, wasteand ventilating pipesincluding fixing with approved adhesive etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
145	150 mm diameter
146	110 mm diameter
147	75 mmdiameter
148	Providing and fixing PVC/ CPVCdoor bendwith oval access door ,IS marked insertion rubber washer 3mm thick bolts and nuts completeincluding fixing with approved adhesive etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
149	Door Bend 150mm dia
150	Door Bend 110 mm dia
151	Door Bend 75 mm dia
152	PlainBend 150 mm dia
153	PlainBend 110 mm dia
154	PlainBend 75 mm dia
155	Single equal branch Teee 150mm
156	Single equal branch Teee 110mm
157	Single equal branch Teee 75mm
158	PVC/ CPVC collar 150mm dia
159	PVC/ CPVC collar 110 mm dia
160	PVC/ CPVC collar 75 mm dia
161	PVC/ CPVC Head 110mm
162	PVC/ CPVC Shoe110mm
163	PVC/ CPVCCowl 110 mm dia
164	PVC/ CPVCCowl 75 mm dia
165	Providing and fixingGI Clamps clips of approved designto PVC rain water pipes / Solil waste pipes with , screwed with M.S. screws complete in all respectincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
166	110 mm diameter
167	75 mm diameter
168	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
169	16mm dia meter
170	20mm dia meter
171	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
172	(25 mm OD ) pipe
173	(32mm OD ) pipe
174	Providingand fixing PPR Union including fixing with pipes completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
175	20mm dia meter
176	25mm dia meter
177	32mm dia meter
178	Providing and fixing PPR/Composite materailGate Vale with wheel including fixing with pipes completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
179	20mm dia meter
180	25mm dia meter
181	32mm dia meter
182	Providing and fixing viterous china water closet Jaguar makeCat No.CNS-WHT-853S220SPPSM RIMLESS SINGLE PIECEWC with PP Soft close Slim seat cover , Duel Flush Cistern Fittings , Fixing AccessoriesSet. Size 370x665x750mm S. Trap -220mmincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
183	Providing and fixing Grab bar-Vertical Swing-Satin Jaquar / Equivlent make Cat no. WAC-SAP-BG0800CS wall mounted or equivalentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.For disabled person
184	Providing and fixing Grab bar-Vertical Swing-Satin Jaquar / Equivlent make Cat no. WAC-SAP-BR06500 CS 692mm long Satin including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. For disabled person
185	Providing and fixing viterous china water closet Jaguar makeSLS-WHT-6851IPI80PPsingle piece wc with pp soft close seat cover, hinges,dual flkush cistern size 360x640x685mm including all fittings and accessories,Jaguar or equivelentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
186	Providing and fixing white vitreous china URS-WHT-13255N Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mmJaquar make, FLV-1093NSQ, Metropole Flush Valve Regular, 40mm Size (Concealed Body) with Exposed Shut Off Provision &, 100mm Square Plate or equivalent make with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
187	Providing and fixing Urinal Partitions, JSE-CHR-110UC450X, H: 900 W: 450 jaquar make or equivalent including all charges for cost, carriage,and labour for fixing and making the wall good asincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
188	Providing and fixingcounter top vitreous china wash basin Jaguar make Cat No.DRS - WHT- 37601 includingincluding CP Waste and waste pipecomplete setHindware /Cera make or equivelentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
189	Providing and fixing Stain less Steel A ISI 304(18/8) kitchen sink as per IS: fittings and brackets, cutting and making good the walls wherever requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
190	Providing andfixing 6 Kgf pvcPoly plastfloor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floorsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.110mm diameter
191	Providing and fixing32mm dia PVCpipe for wash basinincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
192	Providing and fixing 100 mm stainless steel square / circulargratingof approved brandincluding cutting and making good the walls wherever requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
193	Providing and fixing bevelled edge miror of superior glassSaint Govind/Modi guard or TATA make with C.P. set of stud and brass screws and washersincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
194	Providing and fixing 600x120x5 mm glass shelf with edges round offsupported on anodised aluminiumangle frame with CP brass brackets and guard rail complete fixed with screw , rwl plug etc.including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
195	Providing and fixing ACN-1151N, Toilet Roll Holder with Stainless Steel, Flap jaquar make or equivalent including all cost,conveyance and labour charges etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
196	Providing andfixing 6 Kgf pvcPoly plastfloor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floorsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.110mm diameter inlet &75 mm outlet
197	Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) ironpipes and making good the same with cement concrete1:3:6 ( 1 cement : 3 coarse sand :6 graded stoneaggregate 12.5 mm nominal size), including necessaryplaster and pointing in cement mortar 1:4 (1 cement : 4coarse sand)including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
198	110mm diameter
199	75mm diameter
200	Providing & fixing C.P. Towel ring Jaguar make Cat No. AKP-35721Porequivalentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
201	Providing and fixing ACN-1111SM Single Towel Rail 600mm Long, Stainless Steel Jaquar make or equivalent including all cost,conveyance and labour charges etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
202	Providing and fixing C.P. Towel rack with lower hanger Jaguar make AKP-35781 PS or equivelentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
203	Providing and fixing KITCHEN FAUCET CON-309KNM Single Lever Sink Mixer with Swinging Spout (Table Mounted) with 450mmm Long Braided Hoses, jaquar make or equivalentinwith all accessoriesincludingcutting and making good the walls wherever require including all cost,conveyance and labour charges etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
204	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank - Sintex or equivalentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
205	Providing and fixingBib cock (strainght line model) with wall flenge Jaguar make Cat No. CON-037KNor equivalent with all accessaries including cutting and making good the walls wherever requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
206	Providing and fixing C.P. pillar cock with base flenge Jaguar make Cat No.COP-011PM or equivalentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
207	Providing and fixingCOP-057PM angular stop cock with wall flange,Jaguar makeor equivalent with all accessoriesincluding cutting and making good the walls wherever requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
208	Providing and fixing ACN-1131N, Soap Dish Holder, jaquar Make or equivalent including all cost,conveyance and labour charges etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
209	Providing and fixingCOP-057PM angularconsealed cock with wall flange,Jaguar makeor equivalent with all accessoriesincluding cutting and making good the walls wherever requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
210	Providing & fixingshowermixer jagaurORP-10681KPM and concealed body of single lever shower mixer ALD - 681 and shower no OHS - 1629with shower arm 45 cm, and spout SPJ-10429 PM of Jaguarmake orequivelentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
211	Providing and fixing FAUCET RANGE OPP-15011BPM Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses, jaquar make or equivalentinwith all accessoriesincludingcutting and making good the walls wherever require including all cost,conveyance and labour charges etc completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
212	Providing & Fixing hand shower (health faucet) Jaguar make Cat No. ALD-573with 8 mm dia, 1.2 m long flexible tube & wall hook orequivelentincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
213	Construction ofbrick masonry manhole in cement mortar 1:4 ( 1 Cement : 4 Sand) with RCC Top slab with 1:1.5:3 ( 1 Cement : 1.5 coarse sand: 3 Coarse aggregate 20mm nominal size ) foundation concrete 1:4:8 ( 1 Cement : 4 Coarse Sand :8 Graded Stone aggregate 40mm nominal size ) Inside plastering 12 mmthick with cement mortar 1:3 ( 1 Cement : 3 Coarse Sand ) finished with a floating cost of neat cementand making channel incement concrete 1:2:4 (finished with a floating cost of neat cementand making channel incement concretecomplete as per standard design.With Common brunt clayFPS ( non modular ) bricks of class designation 7.5including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
214	Inside diameter 80x90cm and 60 cm deepincluding CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)
215	Inside diameter 80x90cm and 75 cm deepincluding CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)
216	Inside diameter 80x90cm and 90 cm deepincluding CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)
217	Inside diameter 80x90cm and 105cm deepincluding CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)
218	Inside diameter 80x90cm and 120 cm deepincluding CI cover with frame ( Light duty 455x610 cm internal dimensions , total weight of cover 38 kg ( Weight of cover 23 kg and weight of frame 15kg)
219	Providing and fixing Regular White Marble cladding for the entrance gate structure, including rubbing, edge rounding, and mirror polishing of all visible surfaces. The scope of work comprises cladding of the central archway or niche, stone pillars on both sides of the gate, the upper dome/shikhara structure, and the provision and installation of two intricately carved Nandi statues in matching marble. The marble used shall be of uniform white tone, free from cracks, stains, and other natural defects, and shall be machine cut to required dimensions. All edges shall be neatly rounded, and the exposed faces shall be polished to a high gloss finish. The fixing shall be carried out using suitable stainless steel clamps, adhesives, or cement mortar, ensuring long-term stability and aesthetic appeal. The work shall also include all necessary carving, dressing, finishing, curing, scaffolding, and cleaning, complete in all respects as per design, drawing, and instructions of the Engineer-in-Charge.
220	Electrical WorkWiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF)single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS-LF/PVC insulated single core copper conductor cable as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Finolex/ Havells/Polycab/Lapp makes)
221	a) Group A.
222	b) Group B.
223	c) Group C.
224	Wiring for twin control light point with 1.5 Sq. mm. PVC insulated PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF) single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Finolex/ Havells/Polycab/Lapp/ KEI) Group C.
225	Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF)single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Finolex/ Havells/Polycab/Lapp/ KEI) Group B
226	Supplying and fixing two module stepped type Modular electronic fan regulator on the existing modular plate switch box but excluding modular plate including making connections etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havell,s/Schneider )
227	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connectionsincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havell,s/Schneider )
228	Single pole 5/ 6 Amps one way Modular switch.
229	3 pin, 5/ 6 Amps Modular socket outlet.
230	Single pole 15/ 16 Amps one way Modular switch.
231	6 pin, 15/16 Amps Modular socket outlet.
232	Supply and fixing of following sizes/modules GIboxes alongwith modular base cover plate for modular switches in recess etc as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havell,s/Schneider )
233	2 Module75x75mm
234	3 Module 100x75mm
235	6 Module 200x75mm
236	Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of PVC insulated heat resistant flame retardant low smoke halogen free ( HRFRLS-LF) , single core cable in surface/ recessed medium class PVC conduit as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Finolex/ Havells/Polycab/Lapp/ KEI)
237	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for6A Sockets
238	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for circuit wiring
239	2 X 4 sq. mm + 1 X 4 sq. mm earth wire
240	2 X 6 sq. mm + 1 X 6 sq. mm earth wire as sub mains
241	4 X 6 sq. mm + 2 X 6 sq. mm earth wire as sub mains
242	4 X 10 sq. mm + 2 X 6 sq. mm earth wire as sub mains
243	4x16.0 Sq. mm.+2x6sqmm for earth connection for sub mains
244	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Finolex/ Havells/Polycab/Lapp/ KEI) 2 Pair
245	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Finolex/ Havells/Polycab/Lapp/ KEI)
246	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: AKG/BEC/Diplast/Poly plast)
247	20mm
248	25mm
249	32mm
250	40mm
251	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havells/Schneider)
252	Telephone socket outlet.
253	TV Antena socket outlet.
254	BellPush
255	USB Charger
256	Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge as required .
257	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduitincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge as required. (Make: Lapp/D Link/ Finolex) 1 run of cable
258	Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havell,s/Siemens/ L&T/Schneider ) Single pole.
259	Supplyinganderection of 40/50/63 amp rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havell,s/Siemens/ L&T/Schneider )
260	Double pole 40A.
261	TP&N MCB 40/63A
262	Supplyingand fixingoffollowingway, singlepoleandneutral sheetsteel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted,including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.(Make: Legrand/Havell,s/Siemens/ L&T/Schneider ) Double door- 8 way
263	Supplyingand fixingoffollowingway,horizontaltype triplepoleandneutral sheetsteel MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charg as requirede.(Make: Legrand/Havell,s/Siemens/ L&T/Schneider ) Double door-4 way IP 43
264	Supplyingand fixingoffollowingway, vertical type triplepoleandneutral sheetsteel MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required 18 Way for incorporating 125 A. MCCB as incomer andSP DP/TP MCBs for outgoing circuits including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.(Make: Legrand/Havell,s/Siemens/ L&T/Schneider)
265	Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Legrand/Havell,s/Siemens/ L&T/Schneider ) For 8 way, Double door SPN MCBDB
266	Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as requiredincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.(Make: Legrand/Havell,s/Siemens/ L&T/Schneider)
267	For 4 way, Double door TPN MCBDB
268	For 6 way, Double door TPN MCBDB
269	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
270	300 mm width X 50 mm depth X 2.0 mm thickness
271	150 mm width X 50 mm depth X 2.0 mm thickness
272	Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length(upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc. as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.(Make: Crompton//Havells/Bajaj/Usha/Atomberg)Ceiling Fan 1400 mm sweep.
273	Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.((Make: Crompton//Havells/Bajaj/Usha/Atomberg)
274	Exhaust Fan, Heavy duty, 380 mm sweep
275	Exhaust Fan, Light duty, 300 mm sweep
276	Providing & installation of Earthing withCopper.earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
277	Providing & installation of Earthing withG.I.earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
278	Providing & installation of Earthing withG.I.earth earth pipe 4.5m long,40mmdia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7m long etc. ( but without charcoal or coke and salt ) complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
279	Supplying and laying 6 SWG(4MM) G.I.wireOn surface or in recess for loop earthing along with existing surface/recess conduit/submain wiring/cable as required as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
280	Providing and fixing 25 mm X 5 mm copper. strip on surface or in recess for connections etc. as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
281	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
282	Providingof lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
283	Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
284	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surfaceofwallforlightningconductor completeas required.(For horizontal run) including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
285	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surfaceofwallforlightningconductor completeas required.(For vertical run) including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
286	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
287	63 mm dia (OD-63 mm & ID-51 mm nominal)
288	50 mm dia (OD-50 mm & ID-38 mm nominal)
289	160 mm dia (OD-160 mm & ID-135 mm nominal)
290	Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
291	Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts gradein the existing pipe or trench etc. of the required size:- including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. Make:Finolex/ Havells/Polycab/RR Kabel/ KEI.
292	Armoured cable 6sq. mm (2 core)
293	Armoured cable 16sq. mm (4 core)
294	Armoured cable 240sq. mm (3.5 core)
295	Armoured cable 300sq. mm (3.5 core)
296	Providing and laying of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. Make:Finolex/ Havells/Polycab/RR Kabel/ KEI.
297	Armoured cable 16sq. mm (4 core)
298	Armoured cable 240sq. mm (3.5 core)
299	Armoured cable 300sq. mm (3.5 core)
300	Extra for fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required
301	Providing and fixing of Surface mounted 200 watt wipro make LEDFlood light fixture IP 66 forlighting of Yards /Open areascat no. LF 30-272-060-57-XX including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
302	Providing and fixing of Surface mounted 10/12 watt K Lite make LED light fixture cat no.3342including connections, testing and commissioningas required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
303	Providing and fixing of Surface/ Recess mounted 7 watt K lite make LED light fixture cat no 3285.including connections, testing and commissioningas required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
304	Providing and fixing of Surface mounted 120 watt K Lite make LEDFlood light fixture for facade lightingcat no. 4201 including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
305	Providing and fixing of Surface mounted 60 watt K Lite make LEDFlood light fixture for facade lightingcat no. 4200 including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
306	Providing and fixing of Surface mounted 50 watt K Lite make LEDFlood light fixture for facade lightingcat no. 6805 including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
307	Providing and fixing of Surface mounted 30 watt K Lite make LEDFlood light fixture for facade lightingcat no. 4286 including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
308	Providing and fixing of Surface mounted 12 watt K Lite make LEDFlood light fixture for facade/planter lightingcat no. 4271/72 including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
309	Providing and fixing of Surface mounted 10-12 watt K Lite make LEDbollardlight fixture forland scapecat no. 4799 including connections, testing and commissioningas required or its equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
310	Providing and fixing fan box (nominal size) complete in all respect as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
311	Design as per technical specification and drawings manufacture, insure, pack,transport to site, store and erect in properposition , testing and commissioning of Double door with IP-65 protection lvl. cubicle pattern panel fabricatedusing 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables.Distribution panels shall be floor or wall Mounting type, having top/ bottom cableentry , front operated all complete withinterconnections by tinned copper Bus Bars Color-coded heat shrinkable PVCsleevesand painted with powder coated process only with Egg shell white coloredfrominside and light gray from outside as pershade 631 of IS-5 including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
312	Main LT Panel Incoming630A MCCB 50 KABreaking capacity: 1 Nos ( As Incomer of Transformer)630A MCCB 50 KABreaking capacity: 1 Nos ( As DG incomer)630A ATSRequired metering etc. Shell be provided along with power managers and indication lamps for all incong feedersOut going400 Amp25 KA 4P MCCB as incomer for Hotel Panel125A 25 KA TP MCCB:1 Nos80A 16 KA TP MCCB:2 Nos63A 10 KA TP MCB:2 Nos
313	Hotel Panel400A TP MCCB 36 KARequired metering etc. Shell be provided along with power managers and indication lamps for all incong feedersOut going160A Amp25 KA TP MCCB3 Nos125A 25 KA TP MCCB:1Nos80A 16 KA TP MCCB:2 Nos63A 10 KA TP MCB:4 Nos40A10KA DP MCCB: 4 Nos
314	Capacitor Panel 75 KVAR complete with 8 steps APFCRwith following capactor banks complete with MCBs and capacity duty contactors and 320A incomer MCCB.15+310+2*20 KVAR
315	Supply , Installation ,Testing & commissioningand fixing of control panel of suitable size out door mounting type made out of 1.6 mm thick MS Sheet front opnable cabinet with locking arrangement and duly powder coated for campus lighting It shall also consist 32 A DP MCB incomer and 4 No. 6Amps MCB housed in 6Way SP&N MCB DB, single dial time switch, 25 A TP contractor for the automatic switching of luminaries ,with 2 no. 9A contractor2.5 sq. mm cable complete including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
316	DG SetSupply, Erection, Testing and Commissioning of Silent DG SetThree Phase, 415Volts, 50Hz, 1500 RPM Silent (Sound Proof) Diesel Generator Set (with AMF panel). Itshould be water cooled/air collednaturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard).ENGINE:The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 ( With CPCB-II Norms) in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/electronic governor of TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 12 V/ 24 V DC ,battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.ENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication.ALTERNATOR: The alternator should be designed as per (IS4722 and IEC:34 ) standard. Rated Power Factor: 0.8 (lag), Rated voltage : 230/415 volt, SPDP (Screen Protected Drip Proof), Degree of protection: IP-23, Ventilation : Self ventilated air cooled Alternator should have 40 degree maximum class H insulation, Automatic voltage regulator unit should be provided as per standard practice of manufacturer. Its voltage dip shall not exceed more than 20% of the rated voltage at any step load or transient load as per ISO 8528 (Part-1). Its efficiency at full load 0.8 power factor, 10% overload one hour in every 12 hrs of continuous use. along with RCC foundation of DG Set of required size.(MakesSudhir Power,Kirloskar,MTU) 250 KVA Capacity including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
317	Solar Lighting SystemSupplying, installing, testing and commissioning of ALL-IN-ONE SOLAR STREET LIGHT Havells make Cat No. SOLAR AIO 24W withHigh Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially progrmmed to automatically control the dimming and brightness of light, which increases the backup time, complete in all respectincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.Make: Havells/Philips/Wipro
318	Supplying, installing, testing and commissioning of Consul make G.I. 3Mtr Octagonal Pole cat no. RROP-030, top dia 70mm, bottom dia 130mm, sheet thickness not less than 3mm, Base Plate Dimensions (L x B x T) 200 x 200 x 12mm, on road side and landscape lighting in position on required M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the flushing to the ground level including supply and fixing of foundation bolts, complete in all respectas approved by theEngineer in charge including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. Solar Light System. Make: Consul/Surya/Bajaj/Valmont
319	Supply of \" RR Ispat(Consul)/Vulcan/Bajaj Make\" 16 M High Mast lighting system withcomplete with allaccessories. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3/1987 . It shall also include accessories for high mast including head frame, steel wire rope 6 mm dia (7/19 construction) double drum winch, Galvanized Lantern carriage arrangement \"suitable for 6 Nos.luminaires symmetrically & itscontrol gear boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation.The high mast shall be complete with foundation bolts manufacturedfrom special steel and Hot Deep Galvanised along with nuts, washers, anchor plates and templates or equivalent including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
320	Supplying, installation, testing and commissiong of 300 WattCat No. Philips make BVP410 P LED300 CW NB FG PSU SPD P4278 LED Flood Light IP65 for 16Mtr High Mast. including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Philips/Bajaj/Panasonic)
321	Supply and fixing of control panel housing suitable control circuit for the operation of the mast. It shall also consist 32 A TPN MCB incomer, single dial time switch, 25 A TP contractor for the automatic switching of luminaries , power tool control with 2 no. 9A contractor and raise lowe push button, incoming 35 sg. mm and outgoing 16 & 2.5 sq. mm completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
322	Constructoin of suitable shallow foundation with \"M 25\" grade concrete suitable size foundation bolts /anchor platesfor16 mtrs high mast considering the testedsoil bearing capacity at siteat 2 mt depth with all materials & labour. Complete foundation design & calculation on basis of the load bearing capacity of the soil including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
323	Supplying and installation of 16 mtr. high mast with the help of suitable eqipments and wiring of luminaires with all wiring material & labour including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
324	Supplying and installation, testing and commissiong of Led Aviation light for 16 mtrs High Mast including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. (Make: Philips/Bajaj/Panasonic)
325	Supplying and Installation of control panel on suitable foundation including all material & labour including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
326	Provision of GI pipe earthing for High Mast with 2.5M long 40mm dia. G.I. pipe including connection ofHigh Mast earth terminal with 25x3mm GI flats with all materail & labour 2 NOS. PER MAST including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
327	Ornamental poles Providing and Fixing of L-Shape Twin Mounting 700mm each side ornamental bracket for ornamental pole, Twinkle Make Lux Max product complete in all respect andwith one coat ofpaint Complete in all respect or as approved by Engineer in charge.(Make: Twinkle/Bajaj/K-Lite )
328	Supply, erection and testing of ornamental pole 3000 mm high, cast aluminium, polyester/PU painted Black, LuxMax IMPERIAL-E Pole, Twinkle Make for road side and landscape lighting in position on required M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the. flushing the ground level. The pole should be hot dip Galvanized in single dip to average 65 micron DFT.including supply and fixing offoundation bolts (600mm length), with 1 no. 6 AMP. SP MCB with din bar arrangementand earthing links,2nos 2cX 6 sqmm AL.Armd cable gland and Himachal Tourism logo engraved at the base of the pole complete in all respect andwith one coat ofpaint Completeincluding carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge .(Make: Twinkle/Bajaj/K-Lite )
329	Supplying and fixing of Ornamental Light LED POST TOP - SQUARE Medium,LuxMax-PT-164-M 40Watts (or equivalent), 700mm in height and 295mm in Width, warm white colour as required, Complete including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge. ( Make: Twinkle/Bajaj/K-Lite )
330	Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min.efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge .
331	Lift Supplying, installing,testing and commissioning of lift, (OTIS/Schindler/JOHNSON) of following spcefications and Voice Synthesizer.SPEED (mps) : 1 mps , With (all opening on the same side), CONTROLLER TYPE : ACD3-MRL, DRIVE : VF, Regenerative (Closed Loop), POWER SUPPLY : 400/415 Volts (3 Phase AC), OPERATION : Full collective operation, CAR GROUP : One car (simplex) , MACHINE : PM Gearless (Located in shaft on top of guide rails), TRACTION MEDIA : Flat Coated Steel Belt, CAR FINISH :Rear Mid Panel = Ambiance, Rear Corner Panels = Ambiance, Side Mid Panels = Ambiance, Side Corner Panels = Ambiance, Front Panels = Ambiance, FALSE CEILING TYPE : Ambiance ceiling type, FLASE, CEILING FINISH : Stainless Steel #4(Hairline), VENTILLATION : Cross flow fan HAND RAILS : Stainless Steel Mirror Finish Handrails on rear car panels, FLOORING : granite flooring, LANDING DOORS FINISH : Stainless Steel #4(Hairline)FIRE RATED DOORS : Fire rating-120mins , PIT DEPTH : 1600mm , CAR & HOISTWAY DOOR TYPE: Central opening (CO) doors,DOOR OPERATOR : DC Door Operator, COP: Ambiance COP in Stainless steel #4 finish-SS-304, CAR POSITION, INDICATORMonochrome LCD Black background with white font, Dot matrix (LED) Scrolling Display, HALL FIXTURES : Aesthetic hall fixture type 1, Pan Type Fixture, HALL FIXTURE FACE PLATE : Hall fixture finish (Aesthetics), HALL BUTTON, ARRANGEMENT: LCD Monochrome type, STANDARD FEATURES : Anti-nuisance Car Call Protection, Independent Service (for Duplex only), Overload Device, Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of Lobby & Parking, Door Open/Close Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off: PASSENGER LIFT SUITABLE FOR UPTO 544 KGS/ 08 PERSONS (4 stops/03 opening front side open on all sides)PASSENGER LIFT SUITABLE FOR UPTO 544 KGS/ 08 PERSONS (4 stops/03 opening front side open on all sides) including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge
332	Solar PlantSupply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
333	Fire Alarm SystemSITC of 1 Loop Analogue Addressable Fire Alarm Control Panel Ceasefire make expandable upto 2 Loop, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addressable devices one each loop via fully digital communication protocol, equipped with a white backlit display (240x64 pixel resolution) graphical LCD Display with atleast 6 lines of information, 200 fire zones (soft zones), fully programmable via alphanumeric keypad or configuration software, dedicated USB and RS-232 serial port for direct or PC connection, 5500 events storage, loop current 500 mA, panel shall be equipped with in-built multimeter for live monitoring of loop current, earth voltage, loop voltage etc., installer\"s logo application, can be networked to compatible addressable panels and repeater panels by adding a network card, features battery charger status and temperature, supports programmable cause / effect on outputs, panel housing meets IP30 ingress protection classification. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
334	SITC of Intelligent Sounder Interface Module Ceasefire make allows to connect conventional Sounder or Sounder Beacon to addressable loop, with in-built short circuit isolator, allows for two stage alarm capability, addressed through auto and manual options, approved by LPCB for EN 54-17 & EN 54-18 standard. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
335	SITC of Intelligent Analogue Optical Smoke Detector Ceasefire make with advanced optical chamber and smoke inlet design to provide resistance to entry of dust to provide immunity to false alarms, programmable multiple smoke senstivity level setting, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED\"s with 360 degree view of status, auto-addressable/electronically addressed, utilises fully digital communication addressable protocol with high noise rejection approved by LPCB for EN 54-7 & EN 54-17 standard, complete with Standard Detector Base for mounting the compatible addressable detectors. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
336	SITC of Intelligent Analogue Multi-Criteria (combination of smoke and heat) Detector Ceasefire make with special algorithms to utilise information from both smoke and heat sensing elements to ensure high level of immunity to false alarms without compromising genuine alarm sensing performance, programmable multiple smoke senstivity level and 9 modes of operation, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED\"s with 360 degreeview of status, auto-addressable/ electronically addressed, utilises fully digital communication addressable protocol with high noise rejection approved by LPCB for EN 54-5, EN 54-7, & EN 54-17 standard, Complete with Standard Detector Base for mounting the compatible addressable detectors. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
337	SITC of Intelligent Analogue Manual Call Point Ceasefire make with resettable operating element, with in-built bi-directional short circuit isolator, Bi-Colour LED for local indication of device status, single action operation, reset to normal condition using special reset key, clearly visible alarm flag in the activated state. Approved by LCPB for EN 54-11 standard. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
338	SITC of Conventional Wall Sounder Ceasefire make with Beacon for providing Audible and Visual Alarms in response to the output signal from the control panel, 32 selectable tone and adjustable sound level, maximum output volume @ 1M distance 100 dB(A), output tone frequency range 440 Hz to 2900 Hz, Visual alarm device output frequency 0.5 Hz, Approved by LPCB for EN 54-3 standard. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
339	SITC of Single Loop Driver Card Ceasefire make designed for use with compatible analogue addressable panels, provides control and connection/communication to maximum 240 addressable device per loop. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
340	SITC of Intelligent Sounder Interface Module Ceasefire make allows to connect conventional Sounder or Sounder Beacon to addressable loop, with in-built short circuit isolator, allows for two stage alarm capability, addressed through auto and manual options. Approved by LPCB for EN 54-17 & EN 54-18 standard. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
341	SITC of Translator module Ceasefire make, shall allow addressable loop communication to 32 wireless field devices, system devices can be configured through translator module or software, loop powered, two orthogonal antennas for safe and reliable wireless communication, shall have high wireless tranmission range with wireless field devices of max. 150 meter in open space, maximum radiated power 5dBm (3mW), enabled with 7 operating frequency channels for bi-directional wirelesss communication, operating frequency range 865MHz, IP 65 rated. Approved by LPCB for EN 54-18 and EN 54-25 standard. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
342	SITC of follwoing items including carriage upto all lead and lift and as per direction of the Engineer in Charge.
343	Mounting Accessories like back box for detectors, devices & cable glands, etc.including carriage upto all lead and lift and as per direction of the Engineer in Charge.(MAKE: Ceasefire/Siemens/Honeywell or Equivalent),
344	24V 3A DC adapter Ceasefire make for expander. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent),
345	SITC of Response Indicators outside the rooms for getting fire indications of detectors installed above false ceiling / for particular zone / for Loop devices / as a Panel to loop cable complete as required. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.
346	CCTV & Survillance SystemSurveillnace System (CCTV) Providing and fixing HIKVISION IP 4MP COLORVU BULLET CCTV (DS-2CD1047G0-L) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V, One Year Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manualtransportincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.(Hikvision/Samsung/Sony or equivalent or as approved by the Engineer in charge)
347	Providing, fixing HIKVISION IP 4.0MP DOME NETWORK CCTV CAMERA (DS-2CD1343G0E-I) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V; One Year Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manualtransport. (Hikvision/Samsung/Sony)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
348	SITC of HIKVISION IP 4MP 25X 100MTRS PTZ SPEED DOME CAMERA (DS-2DE4425IW-DE)4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8\" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25X optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, one Year Warranty, as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manualtransport or its equivalent (Hikvision/Samsung/Sony)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
349	SITC of HIKVISION 32 CHANNEL 4K H. 265+ NVR (DS-7732NI-K4), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160) resolution, incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port of 8TB each, including minimum length of 3mtrs Honeywell make or equivalent Ultra High Speed HDMI 2.1 Cable with Ethernet, Ultra High Speed HDMI Cable 48GBPS, Supports 3D/4Kx2K/8K Ultra High Definition @60Hz and NVR with one year Warranty complete and as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manualtransport or its equivalent as approved by the Engineer in Charge. (Hikvision/Dahua/Samsung)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
350	SITC of Power Supply ISI MARK including 1 year maintenance and as per direction of Engineer-in charge and specifications as required i including carriage upto all lead and lift and as per direction of the Engineer in Charge.
351	SITC of following POE switch including 1 year maintenance as per required specifications as per direction of Engineer-in charge,including carriage upto all lead and lift and as per direction of the Engineer in Charge.
352	HIKVISION 16 Port Giga PoE Switch Cat No. (DS-3E0518P-E/M)(Hikvision/Samsung/Dlink)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
353	HIKVISION 8 Port PoE Switch (DS-3E0109P-E/M) (Hikvision/Samsung/Dlink)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
354	SITC of DC Connector including 1 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage upto all lead and lift and as per direction of the Engineer in Charge.
355	SITC of Samsung 108 cm (43 inches) Crystal 4K Neo Series Ultra HD Smart LED TV UA43AUE65AKXXL (Black) including one year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manualtransport . (Samsung /Sony)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
356	Providing and fixing Polycab cctv 4+1 wiring for fixing of cameras in the surface / recessed medium class PVC conduit as per requirement & one year maintenance and as per direction of Engineer-in charge and specifications including carriage of material up to all Lead and Liftas per direction ofEngineer-in-charge.
357	Providing Hard disk 8TB hard disk WD make including 1 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transportincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (WD/Seagate )
358	Providing and fixing of Crotomak make 6U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm)including connections, testing and commissioningas required (Plantex/Lepose)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
359	Fire Fighting SystemSupply, installation, testing & commissioning of Electric driven Hydrant Pump and Sprinkler Pump suitable for automatic operation consisting of the following:Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump.Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications:Discharge - 2250 lpmHead- 60 mNo. of stage preferred - Single / DoubleSpeed RPM - 2900Material of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease LubicatedType of pump - End suctionMake: Kirloskar, Lubi, Wiloincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
360	Supply, installation, testing & commissioning of electric driven Jockey Pump suitable for automatic operation consisting of the following:Horizontally mounted centrifugal end suction pump complete with mechanical seal and including necessary arrangement for testing of pump.Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. The pump shall be of the following specifications:Discharge - 180 lpmHead- 60 mNo. of stage preferred - MultistageSpeed RPM- 2900Mover- Electric Motor DrivenMaterial of constructiona) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease LubicatedType of pump - End suctionMake: Kirloskar, Lubi, Wiloincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
361	Supply, installation, testing & commissioning of diesel engine Hydrant Pump suitable for automatic operation consisting of the following:Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump.Water coolled Diesel Engine developing suitable BHP at 2100 RPM for the Pump,common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 200 lts with first charge and manual oil pump set.Flexible coupling and coupling guard with the Pump,Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required. Engine panel Sealed maintenance free batteries of 24 V, 88 AHExhaust pipe of required length with asbestos lagging, mufflerDay oil tank of 400 lts with first charge and manual oil pump set.The pump shall be of the following specifications:Discharge- 2280 lpmHead -60 MtrNo. of stage preferred - Single / DoubleSpeed RPM - 2150 RPMMover- Diesel engine drivenMaterial of construction a) Impeller - Bronzeb) Casing- C.I.c) Shaft & Shaft Sleeve- SS-410d) Bearing - Grease Lubicatede) Type of pump - End SuctionMake: Kirloskar, Lubi, Wiloincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
362	Supplying & fixing of Air vessel of 450 mm dia x 2 Mtr longwith dome ends on both side complete with pressure gauge, air release valves on top and drain valve of 25 mm dia on bottom for manually release. Make: MS Fabricatedincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
363	450MM x 2 MTR LONG
364	250MM x 1.2 MTR LONG
365	Design, manufacture, supply, installation, testing and commissioning of the following intergrated, cubicle type, dead front, extensible, sheet steel control panel anchoring the panel to the foundation. The panel shall be duly powder coated and suitable for 500 volts, 50 cycles, 4 wire supply. The panel will have separate compartments for bus bar and cable alleys.The following components and accessories will be mounted within each control panel. Make: Fabricated using L&T, Schneider, ABB switchgearOne No. Incoming incoming MCCB complete with the following:i. Voltmeter with selector switch and fuses.ii. Ammeter with 630/5 amps CT\"s and selector switch.iii. Over voltage and under voltage tripping mechanism for persistent voltagefluctuations of ± 10% of the rated voltage for more than 5 minutes.iv CT operated over current and earth fault realy (IDMT) with indicating lamps.v. Phase indicating lamps with toggle switches.vi. Indication lamps for ON/OFF/TRIP starters of motor.Aluminium bus bar sleeves type, rated at for three phase & neurtal phase bus bar shall have maximum current density of 1 amps per sq.cm. and the neutral bus bar of not less than 50% capacity.Outgoing feeders with Star delta starters with Single Phase Preventor and out going feeders to wet riser hydrant pump motor and Sprinkler pumpset (2No.-60 HP each-appx.). The compartment will contain CT operated ammeter with selector switch and an indicating lamp with fuse and toggle switch for`ON\"/`TRIP\"status of motor.Star delta starter with single phase preventer and outgoing feeder to jockey pump motor (2No.-10 HP each-appx). The compartment will contain CT operated ammeter and an indicating lamp with fuse and toggle switch for `ON\"/`TRIP\" status of pump motors.Star delta starter with single phase preventer and outgoing feeder to hydrant & sprinkler pump motor(2No.-50 HP -appx). The compartment will contain CT operated ammeter and an indicating lamp with fuse and toggle switch for `ON\"/`TRIP\" status of pump All Necessary equipments for Diesel Engine Pump controller with Battery Charger Rectifier complete in all respectsNecessary cable alleys space for switches, internal wiring and copper earthing of all equipment willll also be included. All switch gears/control gears will be motor duty ratingincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
366	Supply,Installation and Commissioning of Terrace Pumpsets duly coupled type bronze impeller and SS shaft on MS Channel on concrete base with discharge of 450 LPM @ 35 Mtrs Head. Make: Kirloskar, Lubi, Wiloincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
367	Providing fixing and testing and commissioning of DOL Starter panel for terrace pumpsets duly fabricated in powder coated MS Box with MCCB incoming,Voltmeter and Ammeter for auto start through Pressure Switchincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
368	Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or on cable tray as required at site. Make: KEI, Finolex, Havellsincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
369	120SQMM X 4 CORE FOR INCOMING
370	50SQMM X 4 CORE
371	35SQMM X 4 CORE
372	16SQMM X 4 CORE
373	1.5SQMM X 2 CORE FLEXIBLE CABLE FOR PRESSURE SWITCHES
374	4 SQMMX 3 CORE COPPER FOR JOCKEY PUMPSET
375	Providing and fixing of Pressure switch of approved makein MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all respects for Hydrant, Sprinkler, Standby and Jockey pump including necessary wiring upto control panel & other materialsincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Danfos or equivalent)
376	Providing, laying, fixing, testing and commissioning of \"C\" Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (Below 50mm Pipe all Pipes should be threaded type)including carriage upto all lead and lift and as per direction of the Engineer in Charge..Make: Jindal (Hisar), Tata, Surya Prakash
377	200 mm dia
378	150 mm dia
379	100 mm dia
380	80 mm dia
381	50 mm dia
382	Providing and fixing of MS Angle on wall with suitable fastner of 12mm thick x 100mm long as required for pipe supportincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
383	Supply and erection of MS perforated cable tray with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc. complete in all respectincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
384	MS perforated cable tray size 200mm x 50mm x 50mm (2mm thick)
385	MS perforated cable tray size 80mm x 50mm x 50mm (2mm thick)
386	Providing and fixing Pressure Gaugecomplete as required complete in all respect. Dial diameter 100mm calibration 0-16 Kg Make H Guru or equivalent
387	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete in all respectincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. Make: Zoloto, Leader, Sant
388	250 mm dia
389	200 mm dia
390	150 mm dia
391	100 mm dia
392	80 mm dia
393	50 mm dia
394	Proving & fixing ISI Marked Dual Type Non-return valves flanged end class PN-1.6 as per IS:5312/2004in pipe lines includingjointing & cost of Nut Bolt , rubber insertion etc completeincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Zoloto, Leader, Sant)
395	150mm dia(Dual Type NRV)
396	100 mm dia(Dual Type NRV)
397	Supplying, Installation, Testing and Commissioning ofcast iron flanged Y type strainer with stainless steelmesh in PN-1.6 including cost of Nut Bolt , rubber insertion complete in all respectsincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Zoloto, Leader, Sant)
398	150 mm dia
399	100 mm dia
400	Providing, laying, fixing, testing and commissioning of \"C\" Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (Below 50mm Pipe all Pipes should be threaded type)including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Jindal (Hisar), Tata, Surya Prakash)
401	150MM
402	100MM
403	80MM
404	65MM
405	40MM
406	Providing, laying, fixing, testing and commissioning of \"C\" Class Heavy duty MS Pipe (For External) conforming to Indian Standard IS : 1239 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. including cost of excavation and refilling complete in all resepctsincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Jindal (Hisar), Tata, Surya Prakash)
407	150 mm dia
408	100 mm dia
409	80 mm dia
410	Providing and fixing of Tie Rod of 10mm /MS Angle for above 100mm dia pipe on wall/Ceiling with suitable fastner of as required for pipe supportincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
411	Supplying, Installation, Testing and Commissioning of Stainless Steel following headed hydrant valve with instantaneous SS coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 with blank Cap and chain complete in all respectsincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni Single Hydrant Valve)
412	Supplying, Installation, Testing and Commissioning ofRRL FIRE hose Type A, IS:636, 63mm dia x 15m long with Stainless Steel male & female couplings (ISI marked) bound & riveted to hose pipes with GI rivets and GI wire as requiredincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.Make: Omex, Safex, Agni
413	Supplying, Installation, Testing and Commissioning63 mm dia Stainless Steel Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Stainless Steel nozzleconfirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as requiredincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)
414	Providing and fixing first aid hose reel full swinging type including cabinet with 30 m length x 20 mm dia rubber lined pipe with ABS plastic shut off nozzle of 6 mm dia. The hose reel will conform to IS requirements. Rate will25 mm dia pipe connection from riser to hose reel including flexible pipe, sockets, nipples, elbows including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)
415	Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etcincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)
416	900 mm x 600 mm x 500mm (For Yard Hydrants)
417	Providing and fixing standard fireman\"s axe with heavy insulated rubber handle conforming to IS: 926 complete including carriage upto all lead and lift and as per direction of the Engineer in Charge.. (Make: Omex, Safex, Agni)
418	Providing and fixing M.S. fire hose shaft door with frame fabricated from angle iron frame 40 x 40 x 6 mm thick, angle iron shutter 25 x 25 x 4 mm thick, 16 g M.S. sheet of fully welded construction with hinged double front door with locking arrangement and butt hinges, 15 x 3 mm lugs 10 cm long (6 Nos) embedded in cement conc. blocks ( 1: 3: 6 mix) or with rawl plug and screws/bolts and nuts as required, partly glass door 4 mm thick approved by local fire aurthority, painted with one coat of primer, stove enamelled fire red finished, \"Fire Hose\" written on front, suitable to accommodate 2 Nos single headed Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, 1 fire-man\"s axe, including suitably mounted on a raisedmasonry platform as required. (Approx.size 0.9m x 2.1m) including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)
419	Supplying, Laying, Testing and Commissioning ofISI marked BUTTERFLY VALVE PN 1.6, with Stainless Steel seal duly ISI marked completewith rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.Make: Zoloto, Leader, Santincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
420	150MM
421	100MM
422	80MM
423	65MM
424	Providing and fixingfire brigade inlet connection of cast iron body with Stainless Steel63mm dia instantaneous type male coupling withbuilt in check valves and 150mm dia flanged outlet complete with bolts,nuts and rubber insertionsas per IS:904including carriage upto all lead and lift and as per direction of the Engineer in Charge.(Make: Omex, Safex, Agni)
425	Four Way inlet connection
426	Two Way Inlet
427	Supplying & fixing of Air vessel of 250 mm dia x 1.2 Mtr longwith dome ends on both side complete with pressure gauge, air release valves on topincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
428	Providing and fixing of drawl out connection for drawl of water Make: Omex, Safex, Agniincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
429	Providing and fixing Pressure Gaugecomplete as required complete in all respect. Dial dia 100 mm calibration 0-16Kg/cm2 Make: H Guruincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
430	Providing, laying, fixing, testing and commissioning of \"C\" Class Heavy duty MS Pipe conforming to Indian Standard IS : 1239 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. (Below 50mm Pipe all Pipes should be threaded type)including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Jindal (Hisar), Tata, Surya Prakash)
431	150MM
432	100MM
433	80MM
434	65MM
435	50MM
436	40MM
437	32MM
438	25MM
439	Providing & Fixing of installation control valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve as per manufacturer\"s specifications completeincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)150mm dia
440	Providing and fixing Pressure Gaugecomplete as required complete in all respect. Dial dia 100 mm calibration 0-16Kg/cm2 Make: H Guruincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
441	Providing,fixing and Testing of UL Listed quartzoid bulb type Sprinklers head to operate at 68 degree Centigrade. Make: Make: Omex, Tyco, HDincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
442	Upright Type Sprinklers
443	Pendent Type Sprinklers
444	Sidewall Type Sprinklers
445	Providing,fixing and Testing of UL Listed Stainless Steel flexibles for ceiling area for sprinklers Make: Omex, Safex, Agniincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
446	1500 mm Long
447	1200 mm Long
448	1000mm Long
449	Supplying & fixing of Air vessel of 250 mm dia x 1.2 Mtr longwith dome ends on both side complete with pressure gauge, air release valves on topincluding carriage upto all lead and lift and as per direction of the Engineer in Charge.
450	Providing & fixing of Electrically Operated Flow Indicating Switches ( vane type) including tamper switch and accessories, with potential free contact with 2 Nos. NONC. Complete.including carriage upto all lead and lift and as per direction of the Engineer in Charge ( Make: Omex, Safex, Agni).
451	For 150 mm dia
452	For 100 mm dia
453	For 80 mm dia
454	Providing & fixing of 16 (12 working + 4 spare for future) zones annunciater Panel for flow control switches, providing Audio/Visual Indication of actuation of Automatic Sprinkler system / fault hooter etc., for each zone complete as per specifications. The panel should have interface for connection to complete controlled building management system including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Agni)
455	Providing and fixing of 25 mm diainspecting &testing assemblywith gunmetal sight glass& connectedto drain line including carriage upto all lead and lift and as per direction of the Engineer in Charge.(Make: Omex, Safex, Agni )
456	Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure)as per IS: 15683complete with all accessories as per Manufactures Specification. ISI Markcomplete in all respect including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni) 6kg Capacity
457	Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Markcomplete in all respect including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)4.5kg Capacity
458	Providing & fixing of CO2 Type Fire Extinguisher 22.5 Kg Capacity ISI Mark IS 16018 fitted with 5 Mtr. Hose Horn & Trolley Handle Complete in all respectincluding carriage upto all lead and lift and as per direction of the Engineer in Charge. (Make: Omex, Safex, Agni)
459	Providing fixing, testing and commissioning of PORTABLE STORED PRESSURE FIRE EXTINGUISHERS Minimax make I00014861 MMX Foam Based Watermist Low Pressure Fire Extinguisher 9L - IS:15683 (Fire Rating 4A, 75F 233 Stored Pressure Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Epoxy PowderCoated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual (Minimax/Ceasefire)including carriage upto all lead and lift and as per direction of the Engineer in Charge.
460	Providing & fixing of set of GI fire buckets set of four nos. each of 9 lt capacity including providing MS angle stand with hooks for holding buckets, painting with red paint & sign written \"FIRE\" on each bucket & filling of sand in two buckets of each set including carriage upto all lead and lift and as per direction of the Engineer in Charge. ( Make: Omex, Safex, Agni )
461	Solar Power Plant for surface Car parking areaDesign, Engineering, Supply, Installation, Testing and Commissioning of a 83 kWp Grid-Connected Solar Photovoltaic (PV) Power Plant mounted on a hot-dip galvanized steel canopy structure over car parking area, including the supply of Mono/Poly Crystalline silicon solar PV modules (minimum capacity 330 Wp or above) with conversion efficiency ≥16.5%, manufactured in India and conforming to IS 14286/IEC 61215 and IS/IEC 61730 standards. The system shall include a Power Conditioning Unit (PCU) with 97% or higher efficiency, total harmonic distortion <3%, and automatic adjustment of voltage and frequency to suit grid requirements (input 350–800 V DC, output 400 V AC, 3-phase, 50 Hz ±2.5%).The scope includes complete data monitoring system, earthing, lightning and surge protection, array and main junction boxes with IP65 rating, cable glands, lugs, conduit, all necessary XLPE insulated 1.1 kV grade armoured copper power/control cables for module-to-inverter and inverter-to-grid connections. Also includes design, supply, fabrication and installation of hot-dip galvanized (HDG) mild steel canopy structure with suitable foundations and mounting provisions, designed to support the solar modules over a car parking area. The structure shall be fabricated using standard IS sections, hot-dip galvanized to 80 microns or more, with minimum 3.2 m clearance, single-slope configuration, and structurally safe for local wind/earthquake loads as per IS 875 and NBC.Complete in all respects including civil works, layout execution, testing, commissioning, documentation, and obtaining approvals from concerned DISCOM or State Nodal Agencies. All work shall be carried out as per MNRE guidelines, relevant IS/IEC standards, and directions of Engineer-in-Charge.
462	Enterance Gate Ornamental-Electric Lighting Works:Supplying and fixing of LED spotlight luminaire of 12 Watt rating, with IP65 protection, pressure die-cast aluminium housing, suitable for outdoor façade/gate lighting, with warm white colour temperature (3000K–3500K), complete with high-efficiency electronic driver (power factor > 0.90), mounting bracket, fixing hardware, and connection to existing wiring system using copper conductor cable of required size, including all accessories as required, and as per approved specifications and direction of Engineer-in-Charge.
463	Supplying and laying waterproof LED strip light (24W/m) with driver. including all accessories as required, and as per approved specifications and direction of Engineer-in-Charge.
464	Providing and installing decorative gate-top pole light, 15W, smart/Wi-Fi enabled. including all accessories as required, and as per approved specifications and direction of Engineer-in-Charge.
465	Supplying and laying 2.5 sq.mm copper conductor PVC insulated cable (ISI marked) in surface/recess. including all accessories as required, and as per approved specifications and direction of Engineer-in-Charge.
466	Supplying and fixing IP65 weatherproof junction box with required terminals and accessories. including all accessories as required, and as per approved specifications and direction of Engineer-in-Charge.
467	Supplying and installing smart timer switchboard with Wi-Fi-enabled controller for automation. including all accessories as required, and as per approved specifications and direction of Engineer-in-Charge.
468	Provisional sumThe comparison of bid shall be done exclusive of provisional sum. The cost shall include cost of Environmental testing etc.a handling fee of 5% (five percent) shall be payable to the contractor on the actual cost of any approved expenditures under as Provisional sum items1

Also Visit

Tenders

Himachal Pradesh Tenders

Safety and Security Equipment Tenders

Fire Prevention Equipments Tenders

Fire Alarm Systems Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Way Side Amenities At Kaleshwar Mahadev, Kunha, District Kangra, Himachal Pradesh” (Sh: - Civil, Ws & Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.)Ocb/ Contract Package Invitation For Bids No. Sitdp-Hp_W15/2025-26/, Kangra-Himachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Way Side Amenities At Kaleshwar Mahadev, Kunha, District Kangra, Himachal Pradesh” (Sh: - Civil, Ws & Si, Ei, Fire Fighting, Fire Alarm System And Surveillance System Etc.)Ocb/ Contract Package Invitation For Bids No. Sitdp-Hp_W15/2025-26/, Kangra-Himachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us