Tender For Construction Of Grampanchyat Office Building At Doifodwadi Ta. Dist Beed - Excavation for foundation in earth. Soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area stacking and spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and structting etc. complete. (Lift upto 1.50 Metre) (L.NO.21.02 2 ITEM NO 2 .Excavation for foundation in earth. Soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area stacking and spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and structting etc. complete. (Lift Upto 1.50 Metre) (L.NO.21.06 3 ITEM NO .3.Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 4 ITEM NO 4. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) 5 ITEM NO.5.Providing and laying in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations ike raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Formwork, cover blocks compaction and curing roughening the Surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant With Natural Sand (I.NO.25.11-P.NO.222) 6 ITEM NO 6 Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Natural sand. (SR. NO.25.31, P.NO.224) 7 ITEM.NO.7 Providing & casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. (SR.NO.25.50, P.ΝΟ.225) 8 ITEM.NO.8. Providing masonry with conventional / Indian standard type bricks in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering 9 ITEM.NO. 9 Providing and Filling in pinth and floors with contractors soil, sand or murum in 15 cm. to 20 cm. layers including watering and compaction etc. 10 ITEM.NO. 10 Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the, formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. (I.NO.25.70, P. NO.227) 11 ITEM.NO. 11 Providing & casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting, curing, finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer) With natural sand. (Ι.ΝΟ. 26.05, 12 ITEM.NO.12. Providing and fixing in position TMT-FE-500 barreinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs (SR.NO.26.33, P.NO.236) 13 ITEM.NO 13Providing masonry with conventional/Indian standard type bricks in cement mortar 1:6 in superstructure including strikig joints, racking out joints and watering and scaffolding complete. (INO 27.05 D NO 2467 14 ITEM.NO 14 Providing masonry with conventional/Indian standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm, diameter at every third course, properly bent and bounded at ends including scaffolding racking out joints and watering complete. 15 ITEM.NO 15 Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and windows including chamfering. rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting. etc complete. I.NO 39.02 Ρ.ΝΟ. 306 16 ITEM.NO.16. Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. I.NO 39.10 P.NO. 306 17 ITEM.NO 17 Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 9538.10.9 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 31.75 1.3 mm at weight 1.070 kg/Rmt.. Top and side track section 92 31.75x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40*18* 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40* 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40181.25 mm at weight 0.417 kg/Rmt As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box Ι.ΝΟ 39.41 Ρ.ΝΟ 316 18 ITEM.NO 18Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/ Sqm. As per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. I.NO 40.01 19 ITEM.NO 19 Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. I.NO 39.68 P.NO. 323 20 ITEM.NO 20 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. I.NO 32.01 21 ITEM.NO 21Providing internal cement plaster 12mm, thick in two coat in cement mortar 1:5 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing complete using 22 ITEM.NO 22 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less han 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. I.ΝΟ 32.11 Ρ.ΝΟ. 261 23 Item No. 23Providing and fixing Vetrified Matt premium quality Finish decorative type tiles of size 590 mm to 605 mm X 590 mm to 605 mm. in size about5 to 8 to 10 mm. thick and confirming to IS 15622-2006 (Group Bla) for flooring in required positions on plaster of 1.4 cement mortar filling joints with white cement slurry, curing and cleaning complete. (I.NO. 33.42, P.ΝΟ. 271 24 Item No. 24 .Providing and fixing Vetrified Matt premium quality Finish decorative type tiles of size 590 mm to 605 mm X 590 mm to 605 mm. in size about5 to 8 to 10 mm. thick and confirming to IS 15622-2006 (Group Bla) in required positions on plaster of 1.4 cement mortar filling joints with white cement slurry, curing and cleaning complete. b) 25 Item No. 25 Providing and applying white wash in one coat on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down complete. (I.NO.36.02. P.NO.284) 26 Item No.26 Providing and fixing Orissa Pattern type white glazed earthenware 580 X 440 mm. water closet pan, including trap cast iron soil and vent pipes upto the outside face of the wall, 1:2 lime concrete / 1:5:10 cement concrete bedding etc. complete. (As directed by Engineer in charge.). I.NO 42.33 27 Item No. 27 Providing and laying ceramic tiles of RAK/Kajaria/Nitco/Asian or equivalent make having size 30 cm x 30 cm confirming LS 15822/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complate INO 22.24 D NO 268 28 Item No. 28 Providing and laying ceramic tiles of RAK/Kajaria /Nitco/Asian or equivalent make having size 30 cm. x 30 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. I.NO 33.25 29 Item No.29 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface (excluding the primer coat) 30 Item No. 30 Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to the plastered surface, including scaffolding in necessary, clening and prepering the surface, watering for two days completed. (excluding primer coat) complete. 31 Item No. 31 Providing and fixing on walls/ ceiling/floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the 32 Item No. 32 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 33 Item No. 33 Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete oundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with 34 Item No. 34 Providing and fixing 15 mm. diameter screw down bib/stop tap of brass including necessary socket union nut complete. (conforming to I.S. 781) 35 Item No. 35 Providing and fixing white glazed earthenware wash Hand Basin of 55 cm. x 40 cm, size including single cold water pillar tap/brackets, rubber plugs and brass chain, stop tap and necessary P.V.C. pipe connections including P.V.C. waste pipe and without bottled trap upto the outside face of the wall. Spec. No. Bd V.30 Page No. 565 (Item 36 Item No. 36.Providing and laying in position PVC stabilized 100 mm, outer diameter for soil/waste pipe including necessary fitting such as P.V.C, bends with door tee with door single junction with door double junction with door P.V.C. clamps, nails rubber ring and making all connections I.NO 42.52 37 Item No. 37 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (I.NO. 22.19 D ΝΟ 38 Item No. 38 Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. Granite I.NO 33.22 P. NO. 268 39 Item No.39 Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm INO 39 56 P NO 321 40 Item No. 40 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) ithout ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. (I.NO.39.58, P.NO. 321) 41 Item No.41Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, etc complete. Spec. Number As directed by Engineer in Charge (I.NO.6.36) 42 Fineness Modulus (Sieve Analysis ) Silt & Clay Content 43 A) Compressive Strength of CC Cube 44 Bricks Water Absorption, Compressive Sength Efforescence (Set of 5 bricks) 45 Royalty Charges For Sand Royalty + Sircharge 2% + Dist. Mineral Foundation Cess 10% = 211.95+4.23+21.19=237.37 46 Royalty Charges For Other Mineral Royalty + Sircharge 2% = 211.95+4.23 47 18% GST 48 ADD 0.50% LABOUR INS
