Tender For General Repair Work Of Non Residential Buildings In District Sitapur In Year 2025-26 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) :4graded stone aggregate 20 mmnominal size) DSR-4.1.3 2 Brickworkwithcommonburntclay (nonmodular)bricksofclass-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) DSR-6.4.2 3 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading-DSR-9.7.7.1 4 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary-DSR-9.21.2 5 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.DSR 2456 6 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.DSR-10.31 7 Cementconcreteflooring1:2:4(1cement:2coarsesand:4gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 8 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., DSR-11.3 9 Providingandlayingvitrifiedfloortilesindifferentsizes(thicknesstobe specifiedbythemanufacturer)withwaterabsorptionlessthan0.08%and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 10 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) 11 Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paints & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. paint to be used should confirm. DSR-13.53.1 12 One primingcoat and twocoat of oil distemper on new work including supply of all material,labour & T&P etc. required for proper completion of the work. DSR-13.81 13 Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade, including supply of materials, labour & T&P etc. required for proper completion of the work. 13.109.1 14 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.111.2 15 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR 13.1 16 Colour washing two coat, useing approved colouring materials of buff, grey or brown shade, including supply of all materials,labour & T&P etc. required for proper completion of the work. DSR-13.39.1 17 Wall painting (twocoat) with plastic emulsion paint of approved brand and every subscquent coat of wall painting with plastic emulsion paint of approved brand etc. DSR 13.58 18 Scraping old white or colour wash including disposal of refuse as directed byEngineer in charge with in a distance of 60meters(200 feet).DSR-13.88 19 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mmsandcastIronPorStrap,10litrelowlevelwhiteP.V.C.flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR-17.1.1 20 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR-17.7.3 21 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.DSR-17.80 22 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28.1 23 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR 17.31 24 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore DSR-18.16.2 25 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore DSR-18.17.1 26 Providingandfixingballvalve(brass)ofapprovedquality,Highorlow pressure, with plastic floats complete : 25 mm nominal bore-DSR 18.18.3 27 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 25mm nominal bore DSR-18.46.30 28 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore-DSR-18.53.1 29 Laying of interlocking tiles of thickness 60 to 80 mm including levelling and dressing of surface to required level and slope, filling joints with local sand including the cost of all labour T&P etc complete but excluding the cost of all material.DSR-16.91.2
