Tender For Comprehensive Maint To Bldgs Of Group Ii Units/Loc At Rms.; 1 S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 2 S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 3 S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer boardE-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid (605 x 605mm) fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. 4 M & L Water Proofing treatment on RCC roof etc comprising with the following operations and as specified here-in below :- (i) Taking down/scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m.(ii) 15mm thick plastering in cement mortar (1:4) mixed with WPC @3% by weight of cement finished even & smooth and curing for minimum 7 days (iii) Cleaning of plastered roof surface and applying one coat of bituminous primer@ 0.25 litre/Sqm conforming to IS:3384-1986(iv) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.00 Kg/Sqm by torch application method.(v)Applying a coat of solar reflective bituminous aluminium paint @ 0.11Kg/Sqm over mineral surface. 5 M&L for second class hardwood plain fillets exc 13sqcm and notexc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads complete all as specified and as directed. 6 Material and labour forbrick work with sub class `B` bricks, (using old size burnt bricks),straight or curved on plan exc 6m mean radius built in cement mortar (1:6)etc including demoilition of old brick work complete all as specified and directed. 7 Material & labour for brick work with sub class B bricks (using old size burnt bricks)straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc including demoilition of old brick work complete all as specified and directed. 8 M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement including taking down old plaster form its position complete all as specified and directed. 9 M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick or concrete work even and smooth without using extra cementincluding taking down old plaster form its position complete all as specified and directed. 10 M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement)including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.Note:(WPC will be measured and paid separately) 11 M&L for10 mm thick plastering in CM (1:6) on the other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. 12 M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and as directed. 13 M& L for Preparation of new wall surface and applying two coats white washcomplete all as specified and as directed. 14 M&L for preparation of new plastered surface and applying two coats ofcement base paint over a coat of primerof approved shade on walls complete all as specified and as directed. 15 M&Lforcomplete removal of existing treatement on old plastered surface of wall & applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed. 16 M&Lforcomplete removal of existing treatement on old plastered surface of wall & applying two coats of oil bound distemper over a coat ofprimer complete all as specified and as directed. 17 Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 18 M&L for cement concrete type B-1, (1:2:4) (using 20 mm graded stone agg) as in surface channels and drains complete all as specified and as directed. 19 M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms mouldscomplete all as specified and as directed. 20 M&L for RCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. 21 M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping including necessary formwork complete complete all as specified and as directed. 22 M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bedfor laying floor finishes in cement mortar (1:6), etc, set, jointed and pointed in neat cement slurry with grey cement and pigments including dismantling of tiles including cement mortar bedding removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. 23 M & L for PCC (1:4:8) type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in hardstanding complete all as specified and as directed. 24 S&F for4 mm thick veneered decorative Plywood (no of ply 05),grade-I (with BWRresin) with decorative face veneers on one face, fixedwith screws/nails to timber frame work including takind down old unsv one complete all as specified and directed. 25 M&L for light shade/coloured vitrified ceramic tiles 9-10mm thick (Square / rectangular) of area exc 0.18 sqm but not exc 0.36 Sqm each, in floors laid over and including 15mm thick screed bedfor laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etcincluding dismantling of tiles including cement mortar bedding removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. 26 All as per Item No. 25.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM (1:4). 27 M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including backing coat of 10 mm thick in CM (1:4) including dismantling of tiles including cement mortar bedding removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. 28 M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular),area of each tiles exceeding0.06 sqm but not exceeding 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in whitecement mixed with pigment to match shade of tiles,laid over and including 15 mm thick screed bed in CM (1:6)including dismantling of tiles including cement mortar bedding removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. 29 M&L for second class hardwood as in scantlings clean sawn timberfixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. 30 All as per Item No. 29.00 (here-in-before) but except timber. 31 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 310) quality-Aincluding dismantling of old unsv wrought iron or mild steel work of any description complete all as specified and as directed. 32 M&L forPlates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality- Bincluding dismantling of old unsv wrought iron or mild steel work of any description complete all as specified and as directed. 33 M&L forsteelworkintubulartrusses, post, purlinsincludingspecialshapedwasheretc.CompleteusingERWorinductionbuttweldedtubesconformingtoIS1161-1979gradest-240 including dismantling of old unsv wrought iron or mild steel work of any description complete all as specified and as directed. 34 Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. 35 Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and as directed. 36 Taking down shutter not exceeding 1 Sqm each complete all as specifed and as directed. 37 Taking downshutter of any descriptionexceeding 1.0 Sqmnexc 2Sqm eachcomplete all as specifed and as directed. 38 S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specifed and as directed. 39 S & F powder coated for aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specifed and as directed. 40 S & F powder coated for aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys complete all as specifed and as directed. 41 S&F 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame complete all as specified and as directed. 42 S&F for5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. 43 M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frameincluding dismantling of old wall panelling complete all as specified and as directed. 44 S & F for 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple complete all as specified and as directed. 45 M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and as directed. 46 S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 47 M&L for 30mm thick 2nd class hard woodGlazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and as directed. 48 M&L for 30mm thick 2nd class hard woodGlazed and skelton window and ventilatorshutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebatedwithout sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and as directed. 49 S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed. 50 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification complete all as specified and as directed. 51 S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. 52 M&L for PCC type B-0, (1:2:4) (using12.5 mm graded stone aggregates) as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete incl necessary formwork complete all as specified and as directed. 53 M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradelaid, jointed with grey cement and no pigment complete all as specified including preparation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 etc complete all as specified and as directed. 54 S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and as directed. 55 S & F guard bars to windows, plain, let in and fixed independently in steel frames including welding etc guard bars and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed. 56 S&F butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size complete all as specified and as directed. 57 S&F butt hinges, medium weight 75 mm long sizecomplete all as specified and as directed. 58 S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed. 59 S&F Aluminium handle cast type anodised 150 mm long complete all as specified and as directed. 60 S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed. 61 S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) complete all as specified and directed. 62 S&F Aluminium, anodised, barrel tower bolt 150mm longof extruded section and fixed complete all as specified and directed. 63 S&F in repairs Mortice lock,vertical type Brass 2 levers, size 100 mm complete all as specified and as directed. 64 S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and directed. 65 S&F in repair for aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 66 S&F in repairdouble action floor springhydraulically regulated made upof minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainlessl steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 67 M & L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boards includingdismantling of old boarding of any description fixed in any position with nails complete all as specified and as directed. 68 M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. 69 M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 70 M&L applying one coat of synthetic enamel paint (1st grade) on old decorated steel surfaces of any description including preparation of old steel surfaces area over 10cm width & girth complete all as specified and as directed. 71 S&F in repairs of 15 mm bor tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed. 72 All as per Item No. 71.00 (here-in-before) but fixing only. 73 S&F in repairs of 20 mm bor tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and as directed. 74 All as per Item No. 73.00 (here-in-before) but fixing only. 75 Supply and fixe in repairs vitreous china wash hand basin including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets,Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, waste coupling, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 76 S & F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. 77 S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe)complete all as specified and as directed. 78 S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as specified and as directed. 79 S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket,inlet ball valve, floathandle and flush pipe (for EWC or WC)complete all as specified and as directed. 80 S&F in repairs for 15mm dia bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed. 81 S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 82 S&F in repairs for 15mm diaanglevalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and as directed. 83 S&F in repairs CP wall mixer (3 in 1) complete all as specified and as directed. 84 S&F in repairs CP Central hole basin mixer fancy type 15mm dia complete all as specified and as directed. 85 S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and as directed. 86 Supply and fixing of soap-dish chromium plated complete all as specified and as directed. 87 S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and as directed. 88 S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union,complete all as specified and as directed. 89 S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed. 90 S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed. 91 S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed. 92 S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. 93 S&F 110mm dia PVC (SWR) bends complete all as specified and as directed. 94 S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and as directed. 95 S&F of 75mm dia PVC (SWR) Vent cowl complete all as specified and as directed. 96 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 97 S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and as directed. 98 S&F in repairs low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm, 32/40mm dia bore.including all accessories complete all as specified and as directed. 99 S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. 100 Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty. 101 S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square not exc 0.50 Sq.m in each pane, complete all as specified and as directed. 102 S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square exc 0.50 Sq.m in each pane complete all as specified and as directed. 103 S & F 4mm thick figured glass panes pinheaded and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and as directed. 104 S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and as directed. 105 S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. 106 S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. 107 M&L for disconnecting existing tanks capacity exc 500 Ltr & not exceeding 1000 Ltr, setting asidee (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and as directed. 108 S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position as specifiedin SSR Part-I, including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. 109 Supply only Integralwater proofing compound complete all as specified and as directed. 110 Dismantling posts or struts (wood, steel or R.C.C.) any section, in conc portion including takingout embedded portion and making good disturbed gound complete all as specified and as directed. 111 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with complete all as specified and as directed. 112 S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.posts and struts in fencing including cutting tops to shape as directed ,drilling holes,notching for wires,etc,flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165 (For Fencing) complete all as specified and as directed. 113 Excavating in post holes(or similer holes) each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed. 114 M&L for PCC Type C-2 (1:3:6) using 40mm graded stone aggregate as in foundation etc complete all as specified and as directed. 115 Supply only chain link fencing, any size or type complete all as specified and directed. 116 Dismantling of Chain link fencing any size or type complete all as specified and as directed 117 S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm butn exc 10 cm long - 11 to 15mm dia of neck complete all as specified and directed. 118 Fixing only chain link fencing including line wire, any mesh, size and type to any type of stnadards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. 119 M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc of suitable size as required at site complete all as specified and as directed. 120 Onelight controlled by one, one way switch. 121 One Ceiling fan/ Exhaust fan point controlled by one, one wayswitch. 122 One 3 pin socket outlet 5 Amps on the same board with other switches. 123 One 3 pin socket outlet 5 Amps on the switch socket Independent 124 One bell pointcontrolled by one, one way switch . 125 All as per item No- 119.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 126 S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed. 127 S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. 128 S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. 129 S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 130 S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. 131 S&F in repair ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed. 132 S&F in replacement of Bell AC 230 volts musical type complete all as specified and as directed. 133 S&F in repair bell push switch 5 amps piano type flush typecomplete all as specified and as directed. 134 S&F in repairs 20W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fittingcomplete all as specified and as directed. 135 S&F in repairs 10 W LED, 2, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fittingcomplete all as specified and as directed. 136 S&F in repairs Lamp holder , PVC/ Polycarbonate type with PVC round/square block for lamp holder complete all as specified and as directed. 137 S&F in repairs LED lamp 9 Watt suitable for lamp holder fittings complete all as specified and as directed. 138 S&F in repairs/replacement piano switch single pole 5A, one way complete all as specified and as directed. 139 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A Flush complete all as specified and as directed. 140 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A/16A Flush complete all as specified and as directed. 141 S&F in repairs/replacement socket outlet 5 pin 6A, 230 volt flush type complete all as specified and as directed. 142 S&F in repairs/replacement fan regulator 100/120 wall step type AC 220 volt complete all as specified and as directed. 143 S&F in repairs/replacementModular Switch 1 way 6A,1 module complete all as specified and as directed. 144 S&F in repairs/replacement modular switch 1 way 16A, 1 modulecomplete all as specified and as directed. 145 S&F in repairs/replacement Modular Socket ,6A/2/3 pin combined 2 module complete all as specified and as directed. 146 S&F in repairs/replacement Modular Socket ,6A/16A-2/3 pin combined 2 module complete all as specified and as directed. 147 S&F in repairs/replacement stepped type electronic fan regulator,120 W-2 module complete all as specified and as directed. 148 S&F in repairs/replacement modular white cover plate with frame 1/2 module complete all as specified and as directed. 149 S&F in repairs/replacement modular white cover plate with frame 3 module complete all as specified and as directed. 150 S&F in repairs/replacement modular white cover plate with frame 6 module complete all as specified and as directed. 151 S&F in repairs/replacement modular white cover plate with frame 8 module complete all as specified and as directed. 152 S&F in repairs PVC switch board 10x12 suitable for switch socket complete all as specified and directed. 153 S&F in repairs PVC switch board 8x10 suitable for switch socket complete all as specified and directed. 154 S&F in repairs PVC switch board 8 x 6 suitable for switch socket complete all as specified and directed. 155 S&F in repairs PVC switch board 7x4 suitable for switch socket complete all as specified and directed. 156 S&F in repairs PVC switch board 4 x 4suitable for switch socket complete all as specified and as directed. 157 S&F in replacement of PVC cassing & caping 20 mm complete all as specified and as directed. 158 S&F in replacement of PVC cassing & caping 25 mm complete all as specified and as directed. 159 M&L for replacement of PVC conduit 20mm complete all as specified and as directed. 160 M&L for replacement of PVC conduit 25mm complete all as specified and as directed. 161 Supply and fixing for engagement LED 0.5w light red, green, complete all as specified and as directed. 162 S&F Garden light LED 8w bamboo type of 0.5 mtr long IP65 energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source complete all as specified and directed.Make : Havells Cat No BAMBOOBL8WLED830PSYMTOPCM (1.0M)/Bajaj/Philips 163 M&L for sub main wiring Casing capingtwo run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC casing pipe and its accessories of suitable size shall be measured as one unit length incl taking down old unsv complete all as specified and as directed. 164 M&L for sub main wiring Casing capingtwo run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC casing pipe and its accessories of suitable size shall be measured as one unit length taking down old unsv complete all as specified and as directed. 165 Supply and fixing in repairs Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumption 58 Watt fan motor speed 1330 RPM Air delivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.Note : Old Wall mounted fan shall bedeposited to MES Store (AGE E/M) 166 S&F in repairs and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed.Note : Old geyser shall be deposited to MES AGE(E/M) Store 167 Supply and fix in repairs MCCB 4 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 16 KA complete all as specified and as directed. 168 Supply and fix in repairs MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KAcomplete all as specified and as directed. 169 Supply and fix in repairs MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KAcomplete all as specified and as directed. 170 Supply and fix in repairs MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed. 171 Supply and fix in repairs MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 172 Supply and fix in repairs MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed . 173 Supply and fix in repairs MCB Distribution board single door type SPN 2 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed . 174 Supply and fix in repairsMCB SPN 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed. 175 Supply and fix in repairs MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 176 Supply and fix in repairs MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 177 Supply and fixing fortrica AC LED tricolor strip light 18 Mtrs long flexible LED strips with optimum brightness & uniformity of light for perfect cove lighting. IP65complete all as specified and as directed. 178 Supply and fixing in replacementround shape 10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 179 Supply and fixing in replacementUtra slim LEDPanel square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 180 Supply and fixing in replacementUtra slim LEDPanel square shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 181 Supply and fix wall Picture light, 7 Watt, bronze finish for superior feel long life LED light source warm 3000k with good colour complete all as specified and as directed. 182 S&F Bed light 3 Watt all accessories complete all as specified and as directed. 183 S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. 184 Supply , fixing and testing in repairs/replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed. 185 S&F in repairs flexible copper wire 23/76 wire complete all as per specified and directed. 186 S&F in repairs PVC Exhaust fan PVC250 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge.Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store 187 S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store
