Tender For Access Control System - Construction Work Of Critical Care Block (Ccb 50 Bedded) District Jalore, jalore-Rajasthan

Tender For Access Control System - Construction Work Of Critical Care Block (Ccb 50 Bedded) District Jalore - 1 STIC of Finger Print Access Control System having Operation SystemLinux. Size 4.3 inch. Resolution 800x480, Operation MethodCapacitive Touch Screen, Pixel 2MP, Network Interface. RS-485. ExitButton, Door Contact input, USB 2.0, Card Cepacity. 1500 or better, Fingerprint Capacity 1500 or better. Event Capacity 150000,Card Type Mifare I card, Card reading. distance 0 to 3 cm, PowerSupply 12VDC/2A, Supply 12VDC/2A, including metalic push button complete in all respect, 2 SITC of Electro magnetic single leaf lock having power supply and Maximum thrust 280 Kg (617 Lbs) liner thrust, Input Voltag:and Maximum thrust 280 Kg (617 Lbs) liner thrust, Input Voltag: 12VDC/24 VDC. Working Current 12V/500mA,. 24 V/25C mA. LEDindicator Red: Door is unlocked and Green: Door is locked, Suitablefor wooden, Glass, Metal door completewith mounting bracket as required. 3 Supply of Mifare RF card Non Contacting IC Card having workng distance:no more than 100mm (Depends on the antenna dimension). WorkingFrequency. 13.56 MHz. High Date Transnission speed: 106 k bi/s,Anti-Conflict. Ik byte (16 zones. 4 sections per zone, 16 bytes per section). Long time data zones. 4 sections per zone, 16 bytes per section). Long time data all respect 4 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. 5 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) 25MM PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. 25 mm

INR 500 /-

INR 96000.0 /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB