Tender For Provision Of Vocational Lab In Pm Shri Kendriya Vidyalaya Amc C And C Under Ge (East) Lucknow.; 1 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed. 2 -ditto- as per item no 1 but depth exc 1.5m but not exc 3.0 m. 3 Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete. 4 Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil). 5 Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified. 6 M&L for Sand filling under floors or in foundations including watering and consolidation 7 Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. 8 Demolition of cement concrete of any description and in any position not otherwise specifically provided for. 9 M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. 10 M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. 11 M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed. 12 M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed. 13 M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed. 14 M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed. 15 M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat all as specified. 16 M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified. 17 M&L form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat all as specified. 18 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide 19 M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide 20 M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete 21 M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete 22 M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified. 23 Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders 24 M & L for providing precast cement concrete (reinforced)Type B1, 1 : 2 : 4 (20mm graded aggregate) set in cement mortar 1 : 6,in landings, for RCC cover slabs factory made for drains cover with plain faces complete all as specified and directed. 25 M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenlya coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete. 26 M&L fly ash Brick work using old size bricks with sub class B bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 27 M&L fly ash Brick work using old size bricks with sub class B bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed. 28 M&L 15 mm thick cement plasteron fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished even and smooth ( w/o using extra cement) complete all as specified and directed. (WPC measured separately) 29 M&L 15 mm thick cement plasteron otherthanfair faces of brick work or concrete surface on wall in CM 1:6finished even and smooth( w/o using extra cement) complete all as specified and directed. 30 M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection finished even and smooth( w/o using extra cement)complete all as specified and directed 31 M&L for 15mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction , finishing the surface should be even and fair with out using extra cement , complete all as specified and directed. (WPC measured separately) 32 Supply only Liquid water proofing compound, complete all as specified and directed. 33 M&L for treatment of foyer roof with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100micron each layer) having SRI of 1 30, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS: 101 (P-7/Sec-3) 1990 having VOC less than f g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along WIth water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25—40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge by Graco airless machine. The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer-incharge. The manufacturer shall give a guarantee for the peformance & durability for 10-years. 34 GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists etc in walls, ceilings, beams etc including all laps, cutting and waste complete all as specified and as directed. 35 M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified. 36 M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed. 37 M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors complete all as specified and as directed. 38 M&L for PCC 1:3:6 type C-2, (using 40mmgraded stone aggregate) as in plinth protection laid in alternate panels75mm thick finished even and smooth w/o using extra cement complete all as specified and as directed. 39 Forming construction joints 30mm deep x10mm wide filled with sealing compound grade A 40 M & Lfor PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed. 41 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc. 42 M & L for providing cement concretetype B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,bed blocks including necessary form work complete all as specified and directed 43 M&L for matt finish anti skid Vitrified tiles any shade 15 mm thick, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurryover 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as directed. 44 Ditto all as per item No 43 but on vertical surfaces over 10 mm thick rendring in CM 1:4 45 S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed. 46 S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block confirming to IS 15658-2006 any shape and size of M-35 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand incl taking down existing paver blocks complete all as specified and directed. 47 S&Fpowder coated (min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glass and ss wiremess of dia 0.36mm and aperture 1.4mm thick all as specified and directed. ref drg no celz/c-td/151 sheet no 1/1 & 2/2 . NOTE- 1. Glazed shutter glass thickness not less than 5mm and SS wiremess shutter with ss wiremesh as approved by GE is also included. no payment will be made separately.2. No extra payment will be made for section profilesprovidedof higher sizes. 48 S&Fpowder coated (minimum thickness of powder coating 50micron)aluminum ventilators with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings with stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed. 49 S&F M.S Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed. 50 S&F stainless steel25 dia pipe as in curtain rods incl SS brackets and fancy type end knobs, complete all as specified and directed. 51 M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfacesincl preparing of surfaces complete all as specified and directed. 52 M&Lfor preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty all as specified complete all as specified 53 M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified. 54 M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified. 55 M & L for preparation of newly plastered surfaces of wallsand applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm 1 mm thick wall care putty complete all as specified. Note:- Paint to be applied with airless spray machine . 56 Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) complte all as specified and as directed. 57 Granite (of any type) work (table rubbed and polished) 16-18 mm thick for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complte all as specified and as directed. 58 S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. 59 S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls complete all as specified and directed. 60 S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. 61 S&F 110 mm bore PVC (SWR) bends any radius 62 S&F 75 mm bore PVC (SWR) bends any radius 63 S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement. 64 S&F500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball connections all as specified. 65 S&F 600mm long PVC Connection 15mm size with PTMT nutscomplete all as specified and directed. 66 S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed. 67 Do - all as per above itembut 20 mm bore. 68 Do - all as per above itembut 25 mm bore. 69 Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting nexc 10 cm girthcomplete all as specified and directed. 70 S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floorcomplete all as specified and directed. 71 S&F in repairs 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. 72 S&F in repairs 25 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. 73 S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed. 74 S&F CP brass 15 mm bore fancy type swan neck with 360 degree rotating spoutsink mixturecomplete all as specified. 75 S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixingand connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including all accessories like waste fittings and waste pipes. 76 S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, as specifiedand as directed. 77 S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 78 S&Fstainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete,all as specified and directed. 79 S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. 80 S&F mild steel barrel tower bolt of size 200mm stove enamalled black with bright bolt and fixed complete all as specified and directed. 81 S&F Mild steel sliding door bolt of size 300mm plate type stove enamelled black with bright not lessthan 12mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed. 82 S&F mild steel pressed handle oval type stove enamalled black size-150mm complete all as specified and directed. 83 S&FBrass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed. 84 S&F kitchen cabinet shutter with frame including shelves,drawermade of solid PVC Block board18/ 19 mm thick both sides decorative face having smooth outlet integral skinare made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of PVC 18/19mm solid board profile complete all as specified by manufacturer instruction complete,all as specified and directed. 85 S & F auto concealed hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed. 86 S&F stainless steel handle, 150mm size with smooth finish matching the requirment of relevant is code as approved by engr-in-charge complete all as specified and directed. 87 M&L for concrete (1:3:6 type C2) bed to drain pipes for 100 mmincluding packing under and haunching against the sides of pipeswith concrete after they are laid and tested complete all as specified and directed. 88 Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in walletc and making good to the disturbed surfaces to match the existing complete all as specified and directed. 89 All as per serial item No 88 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp. 90 All as per serial item No 88 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp. 91 All as per Serial Item No 88 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed. 92 S&FSwitch Modular 6A single pole, one way, 1 module complete all as specified and as directed 93 S&FSwitch Modular 16A single pole, one way, 1 module complete all as specified and as directed 94 S&FSocket, 6A - 2/3 pin combined 2 module complete all as specified and as directed 95 S&FSocket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed 96 S&F Modular White cover plate with frame,12 module complete all as specified and as directed 97 S&F Modular White cover plate with frame,8 module complete all as specified and as directed 98 S&F Modular White cover plate with frame,3 module complete all as specified and as directed 99 S&FModular White cover plate with frame,2 module complete all as specified and as directed 100 S&FModular Metal flush box 12 module complete all as specified and as directed 101 S&FModular Metal flush box 8 module complete all as specified and as directed 102 S&FModular Metal flush box 3 module complete all as specified and as directed 103 S&F Modular Metal flush box 2 module complete all as specified and as directed 104 S&F telephone socket 1 module complete all as specified and as directed 105 S&F Fan regulator 2 module complete all as specified and as directed 106 Supply and fixLED 40/36 wattlight pureline slim suspended 50mm suspended (hanging type) aluminium extruded linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housingenviromental friendly, energy efficient complete all as specified and directed. 107 Supply and fix LED tube light fittings 1200 mm,20 Whigher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed. 108 Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm sizecomplete all as specified & directed. 109 Material and labourfor sub main wiring with 6 Sq mm nominal cross sectional area,3 run single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 6 Sq mm nominal cross sectional area, single core r runs ( neutral and earth colour code wire), 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.Note : 3 runs of 6 sqmm, 2 run of 6 sqmm earth and nutral conductor and 2 run of PVC conduit shall be measured as one unit length for 110 Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.Note : 2 runs of 4 sqmm, 1 run of 4 sqmm earth and nutral conductor and 1 run of PVC conduit shall be measured as one unit length for 111 Supply, installing, commissioning and testing ,inverter type, split Air Conditioner of capacity 1.5 TR (Hot & Cold) with rotary compressor, Min 3 STAR RATING Nano Titanium filter, auto clean function ,indoor sound leval 32 db, front panel display,wireless LCD remote, precoated aluminium fins,477 cfm air circulation ,auto fan speed, electric driven , suitable for working on 230 volts,single phase, 50 Hz supply complete including cutting of wall, providing stand for out door unit and making good disturbed surface of wall etc and remote operation complete all as specified and directed. 112 Supply and fix ACmodular Box 20 Amp with steel enclosure suitable for Geyser & AC protection to human from eletric shock due to direct and Indirect current as well as provide protection from overload and short circuit fault complete withMCB20Ampafter fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified 113 Supply and fix of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door,AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directet (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No.Make :-Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No : HDA126Z or Schneider, Cat No : LV516312 (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, C curve, 10 KA breaking capacity - 12 Nos. 114 Supply and fix of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. 115 Supply and fix of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity C curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. 116 Supply and fixof MCB, SPN, AC, 415 volt of 63 Amp capacity C curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. 117 Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipemedium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. 118 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote oprated all as specified and directed by Engr-in-Charge 119 Supply and fixing of LEDBldg security light fitting LED 35 watt with SPD, PF not less or equal0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass& IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed and directed. 120 Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed. 121 Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified 122 M & L Returningfilling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed 123 M & L Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed 124 Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cablefor under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement) 125 M & L Old size sub class B bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified 126 Supply and fix GI pipe 80 MM light grade in wall incl cutting complete and making good surface all as specified
