Tender For Addn / Altn And Special Repair To Bdlg No P-02, P-03, P-04, P-05 & P-10 , P-119And P-187Under Ge (A) Kolkata.; 1 NOTE (Applicable for all items) :-(i) The bidders/contractorsare advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.2. It is highlighted that the certain condition of General Condition of Contracts (IAFW-2249) has been modified as per direction of MoD i.e. inclusssion of Performance Security, deletion of Risk & Cost Provisions and increase in defect liability period all as per tender documents. The tenderers should keep in mind while quoting their offer. 2 Consultancy services for health assessment of building/structure auditand chemical rehabuiltation and retrofitting offollowing buildings to find out distressed mapping report and preparation of detailed project report and structure design and drawings of these roof slabs/beams/chajjas/ walls and check present condition of structures and also find out: 1. List of buildings which has structurally sound and floor slabs/roof slabs/beams/chajjas/columns/walls of these buildingcan be repairs in normal maintenance.2. Prepare structure design and drawings of balance distressed roof slabs/beams/columns/chajjas etc. as per IS 456: 2000, IS 1893: 2016 & IS 13920: 2016 (with latest revision) with loading in accordance of IS 875 & IS 1893. The seismic provisions shall be incororated for zone IV.(a) Consultant shall solely be responsible for arrangement of Thermal Scanner and additional Tools & Plants, transportation and residence etc for their staff without any extra cost. (b) The consultant required to be submitted the detailed project report, distress mapping report and drawingsin four hard copy along with a soft copy in CD & shall be vetted from IIT only. 3 NOTE 1:- Consultancy for health assessment of building/structures repair/ retrofitting work and distress mapping report including the following deliverables will be provided for the proposed Health Assessment Job:- a) Visual Inspection Report. b) NDT & Non-NDT Test Reports. c) Health Assessment report including interpretation of test results, statistical & comparative analysis, suggestion/recommendation of repair/retrofitting methods including methodology for retrofitting works, material specification, work specification, detailed estimate for verification of quantities/specification as per related items of BOQ for buildings under the scope.d) Identify all the deteriorated Elements by Visual Inspection.e) Ascertain the residual strength of those elements from DT/NDT tests.f) Recommendation to strengthen the elements.g) Recommendation for Economic repairing/retrofitting technologies.h) Detail repair methodology as per deteriorated elements location details.i) Providing item Specification and works specification in terms of safety, materials, manpower and equipment.j) Submit the detail estimate for structural retrofitting items.k) Checking the strength of repaired members.l) The Consultant/Representative shall be present at all times during execution of the structural repair scheme for technical supervision. 4 NOTE 2:- Test report of Rebound Hammer test, Ultrasonic Pulse Velocity (USPV) test, Half Cell Potential test, Carbonation Test, Cover Meter Test, Rebar Scan Test, Concrete Core Cutting Test, Chemical Tests (PH, Chlorides & Sulphates on core cuttting Samples).NOTE 3:- As per E-in-Cs Branch Policy in vogue any qualified firm with exprience & proven track record in the field of Structural Consultancy and Chemical Rehabuiltation will only be hired for Structural Consultancy, Structural repair and Chemical Rehabuiltation work.NOTE 4:- Building wise detail scope of work including Consultancy service are mentioned in Sch A Notes. 5 Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. (Upto 4th storey height building) 6 All as per item No. 2.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 7 All as per item No. 2.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 8 Demolition ofreinforced Concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as required to facilitate demolition) complete all as specified andas directed. (Upto 4th storey height building) 9 All as per item No. 5.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 10 All as per item No. 5.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 11 Demolition of cement concrete of any description and in any position not other wise specifiy provided for complete all as specified and as directed. (Upto 4th storey height building) 12 All as per item No. 8.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 13 All as per item No. 8.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 14 Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. 15 Taking down old rusted unserviceable steel collapsible gates or rolling shutters of any size including taking out holdfasts/anchorages and other fixtures complete all as specified and as directed. (Upto 4th storey height building) 16 Taking out / Stripping of old Roof treatment membranes /Tar felt including layer ofcement mortar of any type carefully from existing roof surfaces (without damaging roof ) including preparation of old roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust & receive new treatment complete all as specified and as directed.(Upto 8th storey height building) 17 Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbingdown with water etc. complete all as specified and as directed. (Upto 4th storey height building) 18 All as per item No. 14.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 19 All as per item No. 14.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 20 Dismantling of Asbestos Cement (corrugated, semi corrugated etc) roof sheets including ridge and valley etc as in roof covering and segregating serviceable sheet for stacking and removing unserviceable materials from site of work complete all as specified and as directed. (Upto 4th storey height building) 21 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. (Upto 4th storey height building) 22 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises (outside of MOD land) complete all as specified and as directed. (Upto 4th storey height building) 23 All as per item No. 19.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 24 All as per item No. 19.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 25 Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid, bedded & pointed in any mortar complete all as specified and as directed. (Upto 4th storey height building) 26 All as per item No. 22.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 27 Taking down rusted steel windows/ventilators of any description and any size including shutters complete all as specified and as directed. (Upto 4th storey height building) 28 Taking up or down 20mm bore steel water tubingand connections,including cleaning for refixing and deposited to stores complete all as specified and as directed. (Upto 12th storey height building) 29 Taking up or down 25mm bore steel water tubingand connections,including cleaning for refixing and deposited to stores complete all as specified and as directed. (Upto 12th storey height building) 30 Taking up or down 40mm or 50mm bore steel water tubingand connections,including cleaning for refixing and deposited to stores complete all as specified and as directed. (Upto 12th storey height building) 31 Taking down UPVC pipe 50 mm bore with fittings complete all as specified and as directed. (Upto 4th storey height building) 32 Dismantling of 100mm cast iron or reinforcedconcrete drain pipes, jointedincement mortarcomplete all as specified and as directed. (Upto 12th storey height building) 33 Dismantling wrought iron or mild steel work of any description not otherwise provided for and segregating serviceable materials and keeping for reuse at site and removing unserviceable materials from site of work complete all as specified and as directed. (Upto 4th storey height building) 34 All as per item No. 30.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 35 All as per item No. 30.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 36 Taking down wooden chowkats or frames with shutters, area exceeding 1.50 Sqm but not exceeding 4.00 Sqm of each shutter (without taking of shutters from the frames) complete all as specified and as directed. (Upto 4th storey height building) 37 All as per item No. 33.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 38 All as per item No. 33.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 39 Taking down wooden chowkats or frames with shutters, area not exceeding 1.50 Sqm of each shutter (without taking of shutters from the frames) complete all as specified and as directed. (Upto 4th storey height building) 40 All as per item No. 36.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 41 Taking down wooden shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm eachcomplete all as specified and as directed. (Upto 4th storey height building) 42 All as per item No. 38.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 43 All as per item No. 38.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 44 Materials and labour for providing chemical emulsion for Post Constructional Antitermite Treatmentof voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. (Upto 4th storey height building) 45 All as per item No. 41.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 46 All as per item No. 41.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 47 Materials and labour for providing chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. 48 Material and labour for hardcore of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed. 49 Materials and labour for sand filling under the floor or paving, laid including watering and consilidation to obtain a true rammed surfacecomplecte thickness complete all as specified and as directed.Note :- For payment purpose punned thickness shall be measured. 50 Materials and labour for PCC 1:2:4 Type B2 (using 40mm graded crushedstone aggregate) as in filling sunken floor complete all as specified and as directed. (upto 04 storey High of building) 51 All as per item No. 47.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 52 All as per item No. 47.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 53 Material and labour for Plain Cement concrete as in saucer drains Type B1 1:2:4 (using 20 mm graded aggregate), slope shall be maintained as per site requirement complete all as specified and as directed. 54 Material and labour for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate)as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary use and waste of formwork complete all as specified and directed. (upto 04 storey High of building) 55 Material and labour for plain cement concrete type B0 (1:2:4) (using 12.5 mm graded aggregate) as in hold fast block kerbs or mud stops, rounded or chamfered etc comlete all as specified and as directed. 56 Material and labour for reinforced cement concrete 1:2:4 type B1 (Nominal Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, lintel over 1.50m span complete all as specified and as directed. (upto 04 storey High of building) 57 Material and labour for reinforced cement concrete 1:2:4 type B1 (Nominal Mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. (upto 04 storey High of building) 58 All as per item No. 54.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 59 All as per item No. 54.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 60 Material and labour for precast cement concrete 1:3:6, type C1, (using 20mm graded stone aggregate) as in kerb stone/bond stone including necessaryform work set in cementmortar(1:4)complete all as specified and as directed. 61 Materials and labour for25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in sub base and finished the surface fair and even complete all as specified and as directed. 62 Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection including construction joints 10mm wide x 75mm thich filled with mastic bitumen @2.5m c/c including corner and finished the surface even and smooth without using extra cement completeall as specified and as directed. 63 Material and labour for 150mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub base and finished the surface fair and even completeall as specified and as directed. 64 Material and labour for brick work with fly ash bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. (upto 04 storey High of building) 65 All as per item No. 61.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 66 All as per item No. 61.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 67 Materials and labour for half brick thick brick work with fly ash bricks, old size straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified andas directed. (upto 04 storey High of building) 68 All as per item No. 64.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 69 All as per item No. 64.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 70 Materials and labour for use and waste offormwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough flat finished surface in all respect complete all as specified andas directed. (upto 04 storey High of building) 71 All as per item No. 67.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 72 All as per item No. 67.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 73 Materials and labour for use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete as specified and directed. (upto 04 storey High of building) 74 Supply and fixing well seasoned 2nd class hard wood plain fillets, square, rectangular in section, clean sawn secured with nails or brads, sectional area not exceedingt 3 Sqcm complete all as specified and directed. (upto 04 storey High of building) 75 Supply and fixing 18/19mm thick prelaminatedparticle boardinterior grade, prelaminated both side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work including second class hard wood beading on cutting exposed edges and polishing complete all as specified and as directed. (upto 04 storey High of building) 76 All as per item No. 72.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 77 Supply and fixing 12 mm thick prelaminated particle boards (ISI marked), interior grade prelaminated both side with decorative choice lamination, fixed with necessary clips and other like to aluminium frame work, as in doors, windows, partition etc complete all as specified and as directed. (upto 04 storey High of building) 78 Supply and fixing Veneered decorative Plywood with decorative face veneers on one face Grade-I (with BWR resin), fixed with screws to timber frame work 12 mm thickincluding all necessary fittings comlete all as specified and as directed. (upto 04 storey High of building) 79 Supply and fixing 18mm thick solid UPVC ply of1st quality, one side pre laminated of approved colour and one side white colour fixed with screwes, solvent cement /adhesive to make kitchen cabinet and cupboard shutters or drawer including dismantling of old existing cabinet complete all as specified and directed.(upto 04 storey High of building) 80 All as per item No. 76.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 81 All as per item No. 76.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 82 Supply and fixing 18mm thicksolid UPVC plywood of1st quality of both side plain white colour fixed with screws, solvent cement /adhesive to make kitchen cabinet internal partition including dismantling of old existing cabinet complete all as specified and directed.(upto 04 storey High of building) 83 All as per item No. 79.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 84 All as per item No. 79.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 85 Supply and fixing 12mm thicksolid UPVC plywood of1st quality of both side plain white colour fixed with screws, solvent cement /adhesive to make kitchen cabinet back including dismantling of old existing cabinet complete all as specified and directed.(upto 04 storey High of building) 86 All as per item No. 82.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 87 All as per item No. 82.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 88 Supply and fixing well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. (upto 04 storey High of building) 89 Supply and fixing 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed. (upto 04 storey High of building) 90 All as per item No. 86.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 91 Supply and fixing 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces covered with decorative face veneer with lipping/ frame to match complete all as specified and as directed. (upto 04 storey High of building) 92 Supply and fixing 35mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Sec-tion 8, clause 8.24 (a)complete all asspecified and as directed. (upto 04 storey High of building) 93 All as per item No. 89.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 94 All as per item No. 89.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 95 Supply and fixing Factory made single extruded WPC (Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof, fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length comlete all as specified and as directed. (upto 04 storey High of building) 96 All as per item No. 92.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 97 All as per item No. 92.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 98 Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. (upto 04 storey High of building)(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) 99 All as per item No. 95.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 100 All as per item No. 95.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 101 Supply and fixing Stainless steel handles 150mm long, bright polished complete all as specified and as directed. (upto 04 storey High of building) 102 All as per item No. 98.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 103 All as per item No. 98.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 104 Supply and fixing Stainless steel handle (304 grade) of 110mm size as per approved sample for kitchen cabinet shutter complete all as specified and directed. (upto 04 storey High of building) 105 All as per item No. 101.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 106 All as per item No. 101.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 107 Supply and fixing B-11 type Bearing hinges 100mm, cast brass, with Stainless steel hinge pin, bright polished and fixed complete all as specified and as directed. (upto 04 storey High of building) 108 All as per item No. 104.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 109 All as per item No. 104.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 110 Supply and fixing Stainless steel, barrel tower bolts, 200mm long of extruded section complete all as specified and as directed. (upto 04 storey High of building) 111 All as per item No. 107.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 112 Supply and fixing Stainless steel, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed. (upto 04 storey High of building) 113 All as per item No. 109.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 114 All as per item No. 109.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 115 Supply and fixing Extruded aluminium alloy handles 100 mm long, fabricated type, anodised complete all as specified and as directed. (upto 04 storey High of building) 116 All as per item No. 112.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 117 Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. (upto 04 storey High of building) 118 All as per item No. 114.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 119 All as per item No. 114.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 120 Supply and fixing 200mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. (upto 04 storey High of building) 121 Supply and fixing 150mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. (upto 04 storey High of building) 122 Supply and fixing coloured powder coated statinless steel Continuous (piano) hinge, width of flaps (when open) is 30mm complete all as specified and as directed. (upto 04 storey High of building) 123 All as per item No. 119.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 124 All as per item No. 119.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 125 Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when Open) complete all as specified and as directed. (upto 04 storey High of building) 126 Supply and fixingaluminium 4 levers Mortice lock, vertical type of size 100 mm complete all as specified and as directed. (upto 04 storey High of building) 127 Supply and fixing Brass Locks with two levers, drawer, grade I, size 50 mmincluding all necessary fittings complete all as specified and as directed. (upto 04 storey High of building) 128 Supply and fixing Bras Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm longincl all necessary fittingscomplete all as specified and as directed. (upto 04 storey High of building) 129 Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. (upto 04 storey High of building) 130 Supply and fixing well-seasoned 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, complete all as specified and directed. area of article not exceeding 200 cucm each, complete all as specified and as directed. (upto 04 storey High of building) 131 All as per item No. 127.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 132 Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. (upto 04 storey High of building) 133 All as per item No. 129.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 134 All as per item No. 129.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 135 Supply and fixing 150 mm longHasp and staple, safety type, (304 grade) stainless steel including bolt to hinge plate and fixed with screws complete all as specified and as directed. (upto 04 storey High of building) 136 All as per item No. 132.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 137 All as per item No. 132.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 138 Supply and fixing Aluminium Anodised Hasp and Staple, with mild steel hinge pin including bolt to hing plate and fixed with screws 75 mm size complete all as specified and as directed. (upto 04 storey High of building) 139 All as per item No. 135.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 140 Supply and fixing floor power door stopper overall length of cover plate 150mm of zinc alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. (upto 04 storey High of building) 141 All as per item No. 137.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 142 Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & as directed. (upto 04 storey High of building) 143 Supply and fixing hydraulically regulated door closer aluminium body heavy duty designation No 3, universal type, suitable for door shutter weighing between 61 Kg to 80 Kg complete all as specified and as directed. (upto 04 storey High of building) 144 Supply and fixing L-shaped rubberised corner guard for sharp vertical edges of length 1200mm, width 100 x 100mm marked by reflective type of thickness 10mm for used in parking area complete all as specified and as directed. (upto 04 storey High of building) 145 Supply and fixing as in replacement Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. (upto 12 storey High of building) 146 Supply and fixing as in replacement brass chromium plated Decorative type drappery Rod along with all fittings of 25 mm diacomplete all as specfied and as directed. (upto 04 storey High of building) 147 Supply and fixing mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. (upto 04 storey High of building) 148 All as per item No. 144.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 149 All as per item No. 144.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 150 Supply and fixing mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. (upto 04 storey High of building) 151 All as per item No. 147.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 152 All as per item No. 147.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 153 Supply and fixingmild steel TMT bars 5mm dia and over and upto and including 10mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. (upto 04 storey High of building) 154 Supply and fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans;plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. (Upto 12th storey height building) 155 Supply and fix framed work such as grills,grating, etc, with ends of bars shouldered and/or riveted or forged into spikes,framed gurad bars, barred iron doors, laddrs, framed balasters, walk ways, railings framed work of water and similar work conforming to Fe.290.Gde-E-165using 12mm square bar complete all as specified and as directed. (upto 04 storey High of building) 156 All as per item No. 152.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 157 All as per item No. 152.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 158 Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Confirming to IS-1161-1979, Gde-E-250 quality-Acomplete all as specified and as directed. (upto 04 storey High of building) 159 Supply and fixing Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes of Fe 410-W (Gde-E250) quality-A complete all as specified and directed. (upto 04 storey High of building) 160 Supply and fixing collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets complete all as specified and as directed. (upto 04 storey High of building) 161 Supply and fixing 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. (upto 04 storey High of building) 162 Material and labour for hoisting, assemble and fixing of double layer steel scaffolding to external perimeter of building duly cross braced and properly aligned for the functional aspect and safety of the building including dismantling, shifting & removal of scaffolding from site complete all as specified and as directed. (for 05 to 08 storey High of building)Note: - Elevational area of the scaffolding facing the building shall be measured and paid. 163 All as per item No. 159.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 164 Supply and fixing 125x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and as directed. (Upto 4th storey height building)Note: Pressed steel frame shall be filled with PCC Type C0 (1:3:6, using 12.5mm graded crushed stone aggregate) and cost of same shall deemed to be included in the rate quoted by the tenderer in this item. 165 All as per item No. 161.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 166 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete all as specified and as directed. (Upto 4th storey height building)Note: Fittings shall be measured and paid separately under respective items. 167 All as per item No. 163.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 168 All as per item No. 163.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 169 Supply and fixing Anodised powder coated aluminium (minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators or aluminium frame for partition works etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (Upto 4th storey height building) 170 Supply and fixing Anodised powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. (Upto 4th storey height building)Note: Fittings shall be measured and paid separately under respective items. 171 All as per item No. 167.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 172 All as per item No. 167.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 173 Supply and fixingAnodised powder coated aluminumwindow and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedr and including dismantling of existing unserviceable Aluminium window complete all as specified and as directed . (Upto 4th storey height building)Note: Fittings shall be measured and paid separately under respective items. 174 All as per item No. 170.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 175 Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868) of approved design/pattern, with approved standerd section and fix to the existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as complete all as specified and as directed. (only weight of grill to be measured for payment) (Upto 4th storey height building) 176 All as per item No. 172.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 177 All as per item No. 172.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 178 Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. (Upto 4th storey height building) 179 All as per item No. 175.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 180 Supply and fixing suspended false ceiling (Decorative Type) system using metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coatedmain runner of dimension 32 mm x 24mm x 0.80mm thick ( thicknesscomprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner) Cross Tee of dimensions 26mm X 24mm x 0.8 mm thick, wall angle 22.00mm x22.00mm x 0.35 mm thick ( thicknesscomprising of GI/0.35 + PPPCGS/0.3 mm) withand including 6 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 2 mm dia G I bars hangers fixed with steel dash through fasteners with Provn of light fixture complete all as specified and as directed. (Upto 4th storey height building) 181 Supply and fixing GI frame work for seamless ceiling comprising ofGI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. (Upto 4th storey height building) 182 Supply and fixing Gypsum Board 12mm thick in ceiling flat or slopping fixed in jointless finish with jointing compound and jointing tape fixed with screw as per manufacturers instructions with provn of light/electric fixtures complete all as directed complete all as specified and as directed (Upto 4th storey height building) 183 Material and labour for machine pressed precast cement concrete interlocking paver blocks 60mm thick and M 35 Grade confirming to IS-15658-2006 and laid over and including 50mm thick sand cushioning and 100mm thick PCC 1:4:8, type D2, (using 40mm graded aggregate) as in sub base of floor complete all as specified and as directed. 184 Material and labour for precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 20mm thick screed bedin CM (1:4) over and including 100mm thick PCC 1:4:8 type D2 as in sub base complete all as specified and as directed. 185 Supply and fixingMachine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including over 15 mm thick screed bed in CM (1:6) all as specified and as directed. (Upto 4th storey height building) 186 All as per item No. 182.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 187 Supply and fixingMachine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointedincluding rubbing and polishing complete over 10 mm thick backing coat in CM 1:4 with grey cement slurry mixed with pigment to match complete all as spd and as directed. (Upto 4th storey height building) 188 All as per item No. 184.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 189 Materials and labour for Mirror polishing on marble/granite/kota stone/stone work whereever required to give high gloss finish complete all as specified and as directed. (Upto 4th storey height building) 190 Material and labour for joint free non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. (Upto 4th storey height building) 191 All as per item No. 187.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 192 .-Ditto- all as per item No 187.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-. 193 All as per item No. 189.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 194 Material and labour for joint free non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. (Upto 4th storey height building) 195 All as per item No. 191.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 196 All as per item No. 191.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 197 Material and labour for Vitrified ceramic coloured tiles (light shade) 10mm thick (Square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. (Upto 4th storey height building) 198 Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 450x350x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.(Upto 4th storey height building) 199 All as per item No. 195.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 200 All as per item No. 195.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 201 Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 600x300x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.(Upto 4th storey height building) 202 Supply and fixing for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, window cills, cooking platforms and like etc and fixed over and including 15mm thick Screed bedin cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed. (Upto 4th storey height building) 203 All as per item No. 199.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 204 Supply and fixing for 20mm thick granite (of any type) work (table rubbed and polished) as in verticle surfaces and fixed over and including 10mm thick cement mortar (1:4) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed. (Upto 4th storey height building) 205 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete in all as specified and as directed. (Upto 4th storey height building) 206 All as per item No. 202.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 207 Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.and cutting chases for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. (Upto 12th storey height building) 208 Material and labour for Rendering 20 mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall belaid over 10mm thcik plastered surface) with CM (1:4) onfair faces of brick work or concrete surfaces and finishedthe surface even and smooth without using extra cementto match the existing surface complete in all respect as specified and as directed.(Upto 4th storey height building)Note: WPC shall be measured and paid separately under respective item. 209 All as per item No. 205.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 210 All as per item No. 205.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 211 Material and labour for Rendering 15 mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement to match the existing surface all complete all as specified and as directed. (Upto 4th storey height building) 212 All as per item No. 208.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 213 All as per item No. 208.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 214 Material and labour for Rendering on ceiling 5 mm thick in cement mortar (1:3) onof concrete surface finished even and smooth with out using extra cement complete all as specified and as directed. (Upto 4th storey height building) 215 All as per item No. 211.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 216 All as per item No. 211.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 217 Supply only Integral water proofing compound and use as per manufacturer specification complete all as specified and as directed. (Upto 12th storey height building) 218 Complete removal of existing treatmentby using electric sanding machine or steel wire brushing to remove all dust and loose scale etc of wall surfaces & prepare to receive wall care putty complete all as specified and as directed. (Upto 4th storey height building) 219 Materials and labour forpreparation of old plastered surfaces of walls after complete removal of existing treatment and applying Acrylic Smooth exterior paint (Weather Coat) of required shade (Twocoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. (Upto 4th storey height building) 220 All as per item No. 216.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 221 All as per item No. 216.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 222 Materials and labour for twocoats of Anti fungal anti bacterial painton old decorated surface of internal walls includingremoval of existing preparation and applying 1mm thick wall care putty complete all as specified and as per manufacturers instructions and as directed. (Upto 4th storey height building) 223 Materials and labour for twocoats of Anti fungal anti bacterial painton old decorated surface of internal Cellings includingremoval of existing preparation and applying 1mm thick wall care putty complete all as specified and as per manufacturers instructions and as directed. (Upto 4th storey height building) 224 Materials and labour for preparation of old decorated surface by complete removal of existing treatment and applying two coats of acrylic washable distemper over a coat of primer over and including 3mm thick wall care putty to match with the new suface on wall completeall as specified and as directed. (upto 04 storey High of building). 225 All as per item No. 221.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 226 All as per item No. 221.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 227 Materials and labour forpreparation of old plastered surfaces of walls after complete removal of existing treatment and applying two coats of acrylic washable distemper complete all as specified and as directed. (Upto 4th storey height building) 228 All as per item No. 224.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 229 Materials and labour for preparation of old plastered surface of Ceiling & applyingone coat of acrylic washable distemper complete all as specified and as directed. (Upto 4th storey height building) 230 Materials and labour for preparation of old plastered surface of wall & applyingone coat of Plastic Emulsion Paint complete all as specified and as directed. (Upto 4th storey height building) 231 Materials and labour for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and as directed. (Upto 4th storey height building) 232 All as per item No. 228.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 233 All as per item No. 228.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 234 Material and labour for 3mm thick wall care putty on external wall surface including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified and as directed. (Upto 4th storey height building) 235 All as per item No. 231.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 236 Material and labour for 2mm thick wall care putty on external wall surface including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified and as directed. (Upto 4th storey height building) 237 All as per item No. 233.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 238 All as per item No. 233.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 239 Materials and labour for preparing newgypsum board surface of ceiling, pillasters, cornices etc and applyingone coat ofliquid putty to match uneven surface with two coat of acrylic washable distemper over a coat of primer complete all as specified and as directed. (Upto 4th storey height building) 240 Materials and labour for preparation of newly plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and as directed. (Upto 4th storey height building) 241 All as per item No. 237.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 242 Materials and labour for preparation of new plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer over and including 3 mm thick wall care putty completeall as specified and as directed. (upto 04 storey High of building). 243 All as per item No. 239.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 244 All as per item No. 239.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 245 Materials and labour for preparation of new plastered surfaces of celling and applying two coats of acrylic washable distemper over a coat of primer over completeall as specified and as directed. (upto 04 storey High of building). 246 Materials and labour for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. (Upto 4th storey height building) 247 All as per item No. 243.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 248 All as per item No. 243.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 249 Materials and labour for preparation of Old painted wooden surfaces and applying Two coats of Anti-bacterial and Antifungal paint, area exceeding10cm width or girth complete all as specified and as directed. (Upto 4th storey height building) 250 Material and labour for preparation of surface of wood or wood based materials, steel and iron works new or old of any description and girth not otherwise described and treating small articles such as stop, covers, gully gratings, holdfast, ends of posts, back of chowkats, etc and area tarred exc 0.1 sq. m but n exc. 0.5sqm with tar or coal tar black paint complete all as specified and as directed. (Upto 4th storey height building) 251 Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed. (Upto 4th storey height building) 252 All as per item No. 248.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 253 All as per item No. 248.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 254 Material and labour for preparation of old steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamal paint complete all as specified and as directed. (Upto 4th storey height building) 255 Material and labour for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. (Upto 4th storey height building) 256 All as per item No. 252.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 257 All as per item No. 252.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 258 Supply and fixing 4.80 mm thick Sheet glass, ordinary quality frosted on one side and glazingin square not exceeding 0.5 sqm in each pane fixed to aluminium frame window/ventilator complete all as specified and as directed. (Upto 4th storey height building) 259 All as per item No. 255.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 260 All as per item No. 255.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 261 Supply and fixing 4.80 mm thick Sheet glass, ordinary quality frosted on one side and glazingin square exceeding 0.5 sqm in each pane fixed to aluminium frame window/ventilator complete all as specified and as directed. (Upto 4th storey height building) 262 All as per item No. 258.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 263 Supply and fixing6 mm thick toughened glass as in hinged shutter of cup board and similar work fixed to aluminium/wooden frame workexc 0.5 Sq. m in each pane including cutting to shape, drilling holes required complete all as specified and as directed. 264 Supply and fixing 10mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape,drilling holes required complete all as specified and as directed. 265 Supply and fixing decorative Glass film reflective type sticked to glass panes as permanufacturers intructions complete all as specified and as directed. 266 Supply and fixing 110mm bore PVC (SWR) pipes Single socketed inanylength withrubber ring joints fixed to walls complete all as specified and as directed. 267 Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed. 268 Supply and fixing 110 mm bore PVC (SWR) WC connector bent typecomplete all as specified and as directed. 269 Supply and fixing PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. 270 Supply and fixing 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, with oval access door complete all as specified and as directed. 271 Supply and fixing 110mm bore PVC (SWR) junction double, (double T) equal or unequal, with oval access door complete all as specified and as directed. 272 Supply and fixing 110mm bore PVC (SWR) branch piece, (double Y)equal or unequal, with oval access door complete all as specified and as directed. 273 Supply and fixing as in replacement 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 274 Supply and fixing as in replacement 100mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 275 Supply and fixing as in replacement 75mm dia, PVC (SWR) Nahani trap,with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete in all respect as specified. 276 Supply and fixing CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. 277 Supply and fixing CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. 278 Supply and fixing CPVC pipes 40 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. 279 Supply and fixing UPVC pipes50 mm bore (Outer dia) ofSCH-40 and plain UPVC SCH-40 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and as directed. 280 Supply and fixing 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed. 281 Supply and fixing 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed. 282 Supply and fixing 50 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed. 283 Supply and fixing 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and as directed. 284 Supply and fixing 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and as directed. 285 Supply and fixing 50mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and as directed. 286 Supply and fixing as in replacement Brass Cromium Plated Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower complete with 115mm long Bend pipe, connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and as directed. 287 Supply and fixing as in replacememt 15mm bore Brass CP central hole basin mixer with U shaped round casted spout with 450mm long braided hose for mixing hot or cold water screwed down for iron pipe and fixed complete all as specified and as directed. 288 Supply and fixing as in replacement Brass Cromium Plated Sink mixer (wall mounted) with 150 mm (6) long swivel spout, connecting legs and wall flanges complete all as specified and as directed. 289 Supply and fixing as in replacement Brass chromium plated bottle traps of 32 mm bore suitable for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and as directed. 290 Supply and fixing asin replacement 15 mm bore Brass CP Surgical Elbow operated tap with 200mm lever handele screwed down for iron pipe and fixed complete all as specified and directed. 291 Supply and fixing asin replacement 15mmbore bib tapscastcopper alloy chromium plated with crutch or butterfly handle, screwed down, screwed to pipe complete all as specified and as directed. 292 Supply and fixing asin replacement 15 mm dia 2 way bib cock double handle with wall flange screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 293 Supply and fixing as in replacement 15 mm Dia CP stop cock (concealed type), with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed long shank and cup complete all as specified and as directed. 294 Supply and fixing as in replacement 15mm bore angular stop cock made of brass chromium plated screwed both ends for pipe with crutch handle, screwed down, screwed for iron pipe complete all as specified and as directed. 295 Supply and fixing as in replacement of 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for pipe complete all as specified and as directed. 296 Supply and fixing as in replacement 25mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends complete all as specified and as directed. 297 Supply and fixing as in replacementhand shower (health faucet) (Brass Chrome palted) with 8mm dia, 1.25m long, flexible tube with wall hook complete all as specified and as directed. 298 Supply and fixing as in replacement 15 mm bore Brass CP Clinical faucetscrewed down for iron pipe and fixed all as specified and directed. 299 Supply and fixing as in replacement 125mm dia chromium plated shower rose including shower arm with revolving joints fixed to 15/16mm bore any tipe of Pipe complete all as specified and as directed. 300 Supply and fixing as in replacement soap dish holder chromium plated of approximate size 200x 200x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed. 301 Supply and fixing as in replacement toilet paper roll holder with cover, chromium plated fixed to wall with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. 302 Supply and fixing as in replacementwall mounted Grab bar/Hand Rails for disable pateints 600 mm long fixing in wall complete all as specified and as directed. 303 Supply and fixing as in replacementwall mounted L Shaped Grab bar with 500 & 700 mm long for disable pateintsfixing in wall complete all as specified and as directed. 304 Supply and fixing as in replacement tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in CM 1:3 with screwscomplete all as specified and as directed. 305 Supply and fixing as in replacement 100mm dia grating doom withwaste hole of PTMT (minimum weight 25gms) complete all as specified and as directed. 306 Supply and fixing as in replacement 15mm dia PVC connection pipe600 mm long with PTMT nuts completeall as specified and as directed. 307 Supply and fixing as in replacement Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specifed and as directed. 308 Supply and fixing as in replacement PVC bathroom cabinet of size330 x 430mm with chromium plated brass screwscomplete in all respect as specified. 309 Supply and fixingas in replacement looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. 310 Supply and fixing as in replacement glass shelf500 x 125mm with chromium plated bracket guard and railingcomplete all as specified and as directed. 311 Supply and fixing as in replacement corner glass shelf300mm with chromium plated bracket guard and railingcomplete all as specified and as directed. 312 Supply and fix as in replacement Vitreous China White squatting pan of‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and integral foot rests, any pattern complete including provision of PCC bedding andconnection to trap, flushing pipe, antisyphonage pipe, etc. (excluding flushing cistern and flush pipe) including making good the disturbed floor complete all as specified and as directed. 313 Supply and fixing as in replacement vitreous China White colour wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with White PVC seat cover and provision ofjet spray, 32 mm dia PVC flush pipe (excluding flushing cistern and flush pipe) and making all necessary connections complete as specified and as directed. 314 Supply and fixing as in replacement vitreoues china Wash Hand Basin, white/coloured, top counter shunk type, of size 510X430mm includingCP waste coupling 32 mm bore, PVC waste pipe 32mm dia fixed type with and including 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed. 315 Supply and fixing as in replacement for vitreoues china wash hand basin, white colour, flat back, of size 550X400mm including CP brackets, CP waste coupling 32 mm bore with and including 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed. 316 Supply and fixingas in replacement for Vitreous China urinals bowl type, white colour (flat back or corner wall type) of size 465mm x355mm x265mm (minimum) with grating and union for discharge pipe, 15mm dia PVC connection pipe 450mm long, 40mmdia waste pipe 600mm long high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cmcomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinals to plugs with and including 60mm long brass screws, pointing around urinals back in cementcomplete all as specified and as directed. 317 Supply and fixing as in replacement 10 litre capacity low level PVC flushing cistern (White colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed. 318 Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) plate rack of overall size 31 x 30 x 10 made of 1mm thick stainless steel sheetfixed on CP cantilever brackets, complete all as specified and as directed. 319 Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) plate rack of overall size 36 x 31 x 10 made of 1mm thick stainless steel sheetfixed on CP cantilever brackets, complete all as specified and as directed. 320 Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 352mmx 178mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling, 32mm bore PVC waste pipe(heavy duty) 90 cm long,15mm dia 450mm long PTMT connection pipe and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed. 321 Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink without drain board made of stain less steel 1mm thick, kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipeoverall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. with 32mm bore CP waste coupling, 32mm bore PVC waste pipe(heavy duty) 90 cm long,15mm dia 450mm long PTMT connection pipe and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed. 322 Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 20mm bore PTMT float and ball valve set including providing necessary connections after demolition existing PVC tank complete all as specified and as directed. 323 Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 2000 litres with and including 20mm bore PTMT float and ball valve set including providing necessary connections after demolition existing PVC tank and diposited to store complete all as specified and as directed. (Upto 12th storey height building) 324 Material and labour for 10 mm thick screed bed built in cement mortar (1:4) mixed with Water Proofing Compound as per manufactures instructions and top surface of rendering finished even and smooth to recieve water proofing treatment complete all as specified and as directed.Note : Water Proofing Compound shall be measured and paid separately. 325 Material and labour for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/specifications from bottom to top :- (a) Applying bituminous primer @ 200-300 grm per Sqm over plastered surfaces of roof including parapet surfaces. (b) One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.60 kgs per sqm, reinforced with non woven polyester fabric or weight not less than 150 grm per sqm. Polymeric membrane shall taken toa height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note: (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions. (c) Applying two coats of bituminous aluminum paint on top of APP membrane. 326 Material and Labour for applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- (i) Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. (ii) Coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. (iii) Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. (iv) Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. (v) Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. (vi) Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. Note:- The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.(Upto 4th storey height building) 327 All as per item No. 323.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 328 All as per item No. 323.00 above but from 9 storied to 12 storied of building complete all as specified and as directed. 329 Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc till sound surface is reached all various locations in building, subsequently cleaning the surfaces by white brush and air blower and removing rubbish off the premises and disposing at the dumping site approved by local authorities complete all as specified and as directed. (Upto 4th storey height building) 330 All as per item No. 326.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 331 Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcement bars average 25mm(but not less than 15mm air gap) by manual methods (using wire brushing ,chiseling etc) and applying chloride free rust removing chemicalon rusting steel reinforcement bar and removing all rust from steel reinforcement barby emery paper and cleaning the area thoroughly by water and allow it to dry andtotally rust free of reinforcement bar all as complete as per manufacturers instruction complete all as specified and as directed. (Upto 4th storey height building) 332 All as per item No. 328.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 333 Material and Labour for preparation of existing reinforcement surface by brushand application of two component epoxy zincrich primeron existing reinforcement surface ofminimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2and maximum coverage area 5.00 Sqm per litre complete all as specified and as directed. (Upto 12th storey height building) 334 All as per item No. 330.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 335 Material and labour for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and as directed.(Upto 4th storey height building) 336 All as per item No. 332.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 337 Material and labour forsupply,mixingandplacementofmicro-concretecementbasedprepackedsingle component chloride free, sulphate free, non-shrink, free flow. elf compacting, ready to use after mixing water in specified proportion and in required thickness as per manufactures instruction including necessary form work. Compressive strength (ASTM C 109, cm cube) of 35 MPa at 28 days including application curing compound concrete at various locations in Bldgs complete all as specified and as directed. (Upto 4th storey height building) 338 All as per item No. 334.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 339 Material and labour for providing and applying at two component structural grade polymer modified reinforcement mortar upto a thickness of 30mm over a coat of epoxy resin bonding agent as per manufactures specification. The cured mortar shall achieve a minimum compressive strength of 12N/mm2 in a day & 45 N/mm2 in 28 days with Flexural strength 8N/mm2 in 28 days Chloride diffusion coefficient shall be Nil after 24 hours when tested by Accelerated electrochemical chloride ion diffusion test method and the depth of carbonation shall be Nil after 24 hours when tested by Accelerated carbonation test. in addition to this percentage of water absorption should be 0.45 after 24 hours in immersion test at various locations in Bldgs complete all as specified and as directed. (Upto 4th storey height building) 340 All as per item No. 336.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 341 Material and labour for application of high efficiency polymeric resin base filmforming curing agent/compoundover concretesurface withmaximum coverage area 5.00 Sqm per litre or as per manufacturers instruction complete all as specified and as directed. (Upto 4th storey height building) 342 All as per item No. 338.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 343 Material and labour for providing and applying a flexible expansion joint membrane of minimum 150mm wide and 1mm thick, over the prepared joint using a two part epoxy adhesive. The minimum tensile strength of the membrane should be more than 12 N/mm2 and elongation at break should be more than 400%. The installation of the membrane should be carried out as per manufactures specification complete all as specified and as directed. (Upto 4th storey height building) 344 All as per item No. 340.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 345 Material and labour for Bore packing of all the Spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement oras per manufactures specification complete all as specified and as directed. (Upto 4th storey height building) 346 All as per item No. 342.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 347 Material and labour for applying Anti carbonation coating as per manufacturers specification of approved brand, manually by using brushes on the hardened concrete/ plastered surfaces after cleaning the surface and removing all loose particles, deposits etc. including one coat of primer and two coats coatings of Anti carbonation complete all as specified and as directed. (Upto 4th storey height building) 348 All as per item No. 344.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 349 Material & Labour for Carbon Fibre Wrapping, 450 GSM Providing and carrying outcarbon fibre wrapping using High Performance high strength, carbon fibre system for structural strengthening to Reinforced Concrete members as per following steps:-(i)Surface Preparation : Proper surface preparation to be carried out including cleaning, removal of loose material, dust etc, executing required repairing like epoxy injection grouting, polymer modified mortar, epoxy touching Putty , rounding off edges of structural members to 25mm etc. (ii) Application : Prepared substrate shall be primed with epoxy primer supplied in pack size 4 Lit (Base-4.1 kg and Hardener -0.46 kg) at a coverage of 8-10 m2/litre/coat, allow the primer to cure for 24 hours followed by application of first coat of wrapping supplied in pack size 5kg ( Base - 3kg and hardener - 2kg) (having Tensile strength >30 MPa; Elongation > 2.1% ; Fibre strength > 4900 MPa ; Fibre E-Modulus >230 GPa & Flexural Modulus > 1700 MPa when tested as per ASTM D638 Type I and ASTM D 790 & Glass Transition Temperature > 50 °C as per ASTM E 1356) to be carried out at a coverage of 3.5 to 4 m2/lit/Coat at around 250 microns WFT. (iii) cutting of Wrapping (available in standard roll width of 500 mm and roll length of 50 mtr & 100 mtr) in required size and wrap over wet saturant keeping minimum 150 mm overlap, rolling the same using hard roller to impragnent saturant and again applying second coat of saturant using suitable bush or roller etc, completing as per specification and as directed. Note:-Wrapping fabric used shall exhibit the following properties - fiber density of 1.8 g/cc, dry fibre thickness 0.40mm and shall have tensile strength > 4900 MPa ; tensile modulus > 230 GPa and ultimate elongation of 2.1%.The adhesion of the entire system (FRP Sheet, Saturant and primer combined) with concrete shall be > 3.5 MPa with concrete failure as per ASTM D 4541 complete as per specification and as directed. (Upto 4th storey height building) 350 All as per item No. 346.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 351 Material and labour for carry out waterproofing treatment to sound, moisture free concrete surface using Liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks upto 2 mm. System includes proper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc., and application ofWater dispersible epoxy primer followed by two coats of continuous, seamless,water and vapour proof membrane for concrete, coverage @ 2.0 kg/m2 to achieve 1.5 mm WFT in two coats followed by laying of separation layer of 120 gsm non-woven geotextile layer before carry out protection screed etc. complete including all tools and tackles as per manufacturer’s specification. Continuous, seamless,water and vapour proof membrane for concrete cured material shall be having crack bridging of 2 mm, Elongation (ASTMD 412) – >600 %, Tensile Strength (ASTM D412) –2.5 N/mm2, Recovery from Elongation (ASTM D412) – 95 %, 85% Solid Content, Tear Resistance (ASTM D624) – 15 Kn/m, Shore A Hardness (ASTM D2240) – 60, Water vapour transmission- 0.6 g/m2/hr, Water Permeability @ 5 Bar (BS EN 12390)-Nil, Service Temperature – -40°C to 70°C, Flash Point > 70 °C, Viscosity-60p, Specific Gravity-1.5. The item rate shall be including of all kinds of labour, tools & tackle, machineries, lead & lift, mathadi charges, curing, wastages, consumable, cleaning, shifting of debris outside the site premises, surface preparation, etc. complete as per design, drawing & instructions of EIC. Note:- Cost of 120 gsm non-woven geotextile and 75mm Screed concrete Shall be paid separately. 352 Supply & Laying Geotextiles of 120 Gsm over the waterproofing coating to avoid damage during screed casting complete as per specification and as directed. 353 Supply & laying of maximum 75 mm thick (at RW outlet) protective screed over the waterproof coating at proportion of 1:2:4 admixed with suitable integral waterproofing compound conforming IS 2645:2003 @ 200ml per bag of cement and reinforced with PP fibres with proper slope towards RW pipes. Green stage saw cutting on the screed will be done in panels (3m X 3m) with a groove size of 10mm X 15mm Complete as per specification and as directed. 354 Supply and fixing shear connector of 8mm dia & requisite length on the surface to be repaired for the bonding between old and new concrete as per the locations instructed by the Engr-in-Charge. The shear connectors shall be of L shape and welded with existing reinforcement at least 100mm in length @ 200mm c/c both horizontally and vertical followed by coat of epoxy Zinc primer as per manufactures specification complete all as specified and as directed. (Upto 4th storey height building) 355 All as per item No. 351.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 356 Material and labour for providing and inserting mild steel shear key bars/levelling gauges of required length and diameter in reinforced/plain concrete for drilling suitable holes in RCC Slab/ wall/ column/ beams total depthas directed for anchoring steel reinforcement bars including washing with water insertingin the holes at various location in G+3 Bldgsall as per manufactures specification complete all as specified and as directed. (Upto 4th storey height building) 357 All as per item No. 353.00 above but from 5 storied to 8 storied of building complete all as specified and as directed. 358 Material and labour for grouting in RCC walls and slabs by drilling holes @300 mm c/c upto half of the wall depth in zigzag manner using a drill machine and fixing a nozzle of 20mm dia, for injecting of cement or equivalent product till therefusal of injected groutmaterial (grouting operation pressure shall be in between 2 to 4Kg per sq cm) followed by cutting the exposed nozzle so as to make the wall/ slab free from the grouting pipe and to seal the gap with polymer modified mortarall as per manufactures specification complete all as specified and as directed. (Upto 4th storey height building) 359 All as per item No. 355.00 above but from 5 storied to 8 storied of building complete all as specified and as directed.Note For Sl item No 322.00 to 356.00 : Chemical Rehabuiltation work must be carried out by authorised Applicator of the manufacturer. 360 Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such asswitches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittingsetc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces. 361 Material and labour for (concelaed Type) point wiring confirming to IS-694,1100 Volts grade ISI Marked including necessary chase cutting of wall for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit (medium grade) with all accessoriesand sunk modular GI box(1.20mm thick) for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. Note: A. Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and greencoloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.B. The Rate of point wiring includes the following :-(i)Copper wire(ii)PVC Conduit with accessoreis(iii) Chase cutting(iv) other accessories such as modular GI box, modular inner plate and modular Cover plate etc. 362 .-Ditto- all as per item No 358.00 here-in-before butfor 3 pin 6 amps switch socket combination on the same board with 1.5 Sqmm cable and -ditto-. 363 .-Ditto- all as per item No 358.00 here-in-before butfor 3 pin 6 amps switch socket combination on the independant boardwith 1.5 Sqmm cable and -ditto-. 364 .-Ditto- all as per item No 358.00 here-in-before butfor one light point control by 2 way switch on the independent board with 1.5 Sqmm cable and -ditto-. 365 .-Ditto- all as per item No 358.00 here-in-before butfor one 5 pin 6/16 Amps switch socket combination on independent boardwith 2.5 sqmmPVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-. 366 .-Ditto- all as per item No 358.00 here-in-before butfor one 5 pin 6/16 Amps switch socket combination on independent boardwith 4.0 sqmmPVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 4.0 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-. 367 Supply and fixing switch socket combination 2 in 1, 5 pin 5 Amps, 240 VFlush type, complete all as specified and as directed. 368 Supply and fixing switch socket combination 2 in 1, 5/15 Amps, 240 Volts, flushtype universal complete all as specified and as directed. 369 Supply and fixing switch socket outlet 2 in 1, 5 pin 5 Amp,230 Voltsflush type complete all as specified and as directed. 370 Supply and fixing switch piano, flush type 5 Amps 240 Volt single pole, one way complete all as specified and as directed. 371 Supply and fixing switch piano, flush type 5 Amps 240 Volt single pole, two way complete all as specified and as directed. 372 Supply and fixing bell push, flush button single pole 6 amps 240 volts AC with polycarbonate bodycomplete all as specified and as directed. 373 Supply and fixing Calling Bell multi music type, complete all as specified and as directed. 374 Supply and fixingfan regulator electronic, flush type humming with (step type) polycarbonate body suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and as directed 375 Supply and fixing Modular Socket outlet, 6 Amp, 3 pin combined 2 module, complete all as specified and as directed. 376 Supply and fixing Modular Socket outlet, 16 Amp, 3 pin combined 2 module, complete all as specified and as directed. 377 Supply and fixing Modular switch single pole, one way,6 Amp, 1 module, complete all as specified and as directed. 378 Supply and fixing Modular switch single pole, one way,16 Amp, 1 module, complete all as specified and as directed. 379 Supply and fixing Modular switch single pole, two way,6 Amp, 1 module, complete all as specified and as directed. 380 Supply and fixing ceiling rose surface bakelite three terminal65 x 50mm, PVC/Polycarbonate, isolated body 240 volts complete all as specified and as directed. 381 Supply and fixing lamp holder suitable for batten fittings complete all as specified and as directed. 382 Supply and fixing sub-main wiring with PVC insulated & unsheathed Four runs of 10 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith two runs of10 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through 25mm bore PVC concealed conduit (medium grade) after and including taking down existing sub main wiring complete all as specified and as directed.Note : Four runs of 10 Sqmm, Two runs of 10 Sqmm cable and one run of conduit shall be measured as one unit. 383 Supply and fixing sub-main wiring with PVC insulated & unsheathed Four run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith Two run of6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through 25mm bore PVC concealed conduit (medium grade) after and including taking down existing sub main wiring complete all as specified and as directed.Note : Four runs of 6 Sqmm, Two run of 6 Sqmm cable and one run of conduit shall be measured as one unit. 384 Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through 20mm bore PVC concealed conduit (medium grade) after and including taking down existing sub main wiring complete all as specified and as directed.Note : Two runs of 6 Sqmm, one run of 6 Sqmm cable and one run of conduit shall be measured as one unit. 385 Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through PVC Casing Caping of suitable size after and including taking down existing sub main wiring complete all as specified and as directed.Note : Two runs of 6 Sqmm, one run of 6 Sqmm cable and one run of conduit shall be measured as one unit. 386 Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through 20mm bore PVC concealed conduit (medium grade) after and including taking down existing sub main wiring complete all as specified and as directed.Note : Two runs of 4 Sqmm, one run of 4 Sqmm cable and one run of conduit shall be measured as one unit. 387 Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 2.5 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of2.5 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly asearth continuity conductor, drawn through 20mm bore PVC concealed conduit (medium grade) after and including taking down existing sub main wiring complete all as specified and as directed.Note : Two runs of 2.5 Sqmm, one run of 2.5 Sqmm cable and one run of conduit shall be measured as one unit. 388 Supply and fixing as in replacement vertical MCB DB TPN 4 ways (double door) IP-43, IK-9 protection with TP/FP MCCB incommer and TPN/SPN MCB as outgoing including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. 389 Supply and fixing as in replacement MCB DB TPN 4 ways (double door) IP-43, IK-9 protection with MCB incommer including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. 390 Supply and fixing as in replacement MCB DB SPN 12 ways double door including bus bar neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. 391 Supply and fixing as in replacement MCB DB SPN 8 ways double door including bus bar neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. 392 Supply and fixingas in replacement Single pole and neutral sheet metal enclosure (IP 42 protection) with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. 393 Supply and fixing as in replacement MCCB triple pole and neutral (Four pole) 160 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and fixed magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections complete all as specified and as directed. 394 Supply and fixing as in replacement 63 Amps, TPN, 240 Volt C series, breaking capacity 10 KA complete all as specified and as directed. 395 Supply and fixing as in replacement MCB 6 to 32 Amps, SPN, 240 Volt C series, breaking capacity 10 KA complete all as specified and as directed. 396 Supply and fixing as in replacement MCB 40 to 63 Amps, SPN, 240 Volt C series, breaking capacity 10 KA complete all as specified and as directed. 397 Supply and fixing as in replacement MCB 6 to 32 Amps, SP, 240 Volt C series, breaking capacity 10 KA complete all as specified and as directed. 398 Supply and fixing 1 X 10Watt, 230V LED Lamp with B-22 base suitable for holder fittings complete all as specified and as directed. 399 Supply and fixing as in replacement for LED 18W surface mouted square led downlighter deigned in Polycarbonate hosing with inbuilt driver and revolutionary flicker controlled technology to reduce harmful invisible flicker present in LED lighting sources including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 400 Supply and fixing as in replacement for LED tube light fitting 1 X 20Watt, 230V, 1200mm, 6500Kwith aluminium housing & integrated electronic driver fixingon PVC/wooden round block including all accessories and connecting to celling rose complete all as specified and as directed. 401 Supply and fixing as in replacement for LED tube light fitting 1 X 10Watt, 230V, 600mm, 6500Kwith aluminium housing & integrated electronic driver fixingon PVC/wooden round block including all accessories and connecting to celling rose complete all as specified and as directed. 402 Supply & fixingas in replacement Surface mounted LED bulk head light fitting 9/10W, IP66, Iumen output >65 lum/watt, color temp 5700- 6500K,CRI>70, THD<20%, PF>0.9, operating voltage 220-240 V in high pressure die cast aluminum housing in polycarbonate cover with clear prismatic diffuser and lamp holders etc complete making connections, complete all as specified & directed. 403 Supply and fixingas in replacement for 2 x 2 surface mounting LEDluminarie 40 W after mounting white powder coated CRCA housing with high power LEDs, plane front frame with translucent cover fixed to the housing including LED lamp, other accessories and necessary electric connection complete all as specified andas directed. 404 Supply and fixingas in replacementfor Compact building security lighting luminaires with deep drawn housing for single 60 Watt LED, 5700K with toughened glass protection, electronic driver, pressure die cast aluminium housingIP66,with epoxy white powder coated and fixing bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length 1.5 mtr ,fixed over the vertical wall through two numbers mild steel clamp of 25mm width ,3mm thick MS flat strip and four Nos nuts,bolts & washers of 12mm dia ,150mm long grouted into wall complete all as specified andas directed. 405 Supply, installaion, testing and commissioning Electric kitchen chimney, auto clean type with Baffle filters, minimum length 90cm (suitable for 3 to 5 burner stove) with minimum suction capacity 1425 m3/hour, touch control panel, noise level not less than 58db including exhaust duct with alll fixing accessories and making hole on the wall for passing the exhaust duct complete all as specified and as directed. 406 Taking down ceiling/ Exhaust fan of any sweep carefully from its original installed position, dismantling complete, cleaning all dust, applying grease for bearing, changing of minor spare parts to make it serviceable, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust, reassembling the fan and blades, hanging/fixing the fan in its original position and testing on completion complete all as specified and as directed. 407 Supply and fixing PVC exhaust fan 200mm sweep size (latest 5 star rated as per BEE) with louvers, AC, Single phase 230/240 volts 1400 RPM and connecting with 1.5 Sqmm, 3 Core flexible copper wire from ceiling rose to fan after and including cutting/making opening of walls and making good the disturbed surfaces completeall as specified and as directed. 408 Taking down geyser, of any type and Refixing the same after completion of civil work complete all as specified and as directed. 409 Supply and fixingair termination, single pointed, aluminium rod 12mm dia and 300mm longwith all accessories required for fixing/mounting on 20mm GI pipe including taking down old unserviceablematerials and make good the disturbed surface complete all as specified and as directed. 410 Supply & fixing Test point box of suitable size including terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw and connected with earthing strip including taking out old unserviceable materials and make good the disturbed surface complete all as specified and as directed. 411 Supply & fixing single aluminium strip of size25 x 3 mm aluminium in proper positon saddles and fixing screws for roof (ring) conductors to the building air termination point as required after and including taking out old unserviceable materials and make good the disturbed surface complete all as specified and as directed. 412 Supply & fixing single galvanised strip of size32x6 mm galvanised iron in proper positon saddles and fixing screws for roof conductors and down conducrors from top to the building air termination point to the test points of the building as required after and including taking out old unserviceablematerials and make good the disturbed surface complete all as specified and as directed. 413 Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion and taking down old unserviceable materials complete all as specified and as directed. 414 Taking Down Carefully XLPE cable of size of any size from trench/surface including making good disturbed surface of walletc complete all as specified and as directed. 415 Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 16 Sqmm 4 core laid in trenches/ fixed to wall as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. (Note: Used for Bldg panel to TPN Connection.)
