Construction Of Panchayat Ghar At Zangli= 1 Earth work in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting. 2 Providing & Laying ofstone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete 3 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) 4 P/Lin position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size 5 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:3:6 coarse sand 20mm nominal size crushed stone agg.)using 20% plum 6 Centring and shuttering of kit ply including proping, strutting & removal of the same.foundation 7 Walls 8 Suspended Floors 9 Providing and Laying Damp Proof course/levelling Coat 50 mm thick with cement mortar in 1:2:4 mix, 20mm nominal size of aggregate and curing complete. 10 Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand)Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 11 Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Ist KD wood. 12 providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. KDwood 13 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD)and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick KDwood 14 Providing & fixing 30mm thick wire gauze shutters using galvanised MS wire aperture1.4mm wire dia 0.63mmfor doors & windows and clerestory windows incld bright finished/ black enamelled M.S Butt hinges with necessary screwsKDwood 15 Providing and fixing of Aluminium fittings. 150 mm tower Bolt 16 100mm tower Bolt 17 250mmx16 Al Drop 18 125 mm Handle 19 100mm Handle 20 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 21 ReinforcementofRCCworksincludingstraightening,cutting, bendingplacinginpositionandbindingallcomplete.ild steel and medium tensile steel bars 22 Filling by Available excavatedearth (excluding rock)in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. 23 Supplying and filling in plinth with fine sand /Nallah Muck under floors including watering rammiing ,consolidating and dressing complete.. 24 Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 12.50mm nominal size stone aggregate (crushed) including glass strips at a squared interval of 5x5 25 12mm Cement Plaster of mix 1:4(1 cement:4 fine sand) 26 Structural steel welded in built up sections trusses and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete 27 Providing Color Coated high rib roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick 28 Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm 29 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc 30 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm of kajaria or somany make 31 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete 32 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 33 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including coat of priming 34 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 35 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 36 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two ormorecoats)overandincludingprimingcoatwithwater thinnable cement primer 37 Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steelpulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer. 38 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 39 P/l of stone soling / RBM including all carriages.by MT10km Avg Lead 40 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:3:6 using 40mm nominal size aggregate.with 20% Plum 41 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) 42 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 43 Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars 44 Centering and Shuttering etc and removal of formworkfor Suspended Floors 45 Centering and Shuttering etc and removal of formworkfor walls 46 12mm Plaster in 1:4 mix 47 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 48 Providing and fixing Ist quality ceramic glazed Floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 49 Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or“P”trap incl. 10 litre low level flushing cisternLong pattern W.C Pan of size 580x440 mm 50 Providing and placing on terrace (at all floor levels) polyethylene water storage tankwith cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 51 P/f of bib cocks /Angle Cocks of 15mm nominal bore of quality like Essel or Equivalent 52 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.20mm 53 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 54 Providing and fixing MS sheet of 1mm thick for doors, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 55 Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) 56 Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) 57 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 58 P/l of stone soling / RBM including all carriages. 59 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:3:6 using 40mm nominal size aggregate 60 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) 61 12mm Plaster in 1:4 mix 62 Dry random rubble masonry with hard stone in foundation and plinth:using nallah stone without bond stone 63 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 64 Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level TMTbars 65 P/f of sewage pipes of class B of approved brand. 75 MM 66 100MM 67 P -Trap 68 S-Trap 69 Cowl 75mm 70 D bend 71 P/f of ball valves 15mm nominal bore of approved quality 72 Providing and fixing of Cp grating 100mm dia. 73 P/f of pipes including cost of unions , sockets etc 25mm nominal bore ( Supply Line150 Rft) OF approved brand and manufacture. 74 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma urban/ Eq. make), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required..( Havell/Legrand/Roma urban/ Eq. make as per ISI Standard ).(1.10) 75 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Anchor/ Eq. make), single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 76 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Anchor/ Eq. make), single core cable in surface/ recessed medium class PVC conduit as required(C) 2 X 4 sq. mm + 1 X 6 sq. mm earth wire 77 Supplying and fixing of following sizes of medium class PVC conduit ( approved quality)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm 78 Supply and fixing of 16/20 amp/230 V AC 6 pin sockets with cover plateAnchor Roma urban/SSK NV/Havells/ Eq. make. 79 Supply and fixing of 16/20 amp/230 V AC one way switch with cover plateAnchor Roma urban/SSK NV/Havells/ Eq. make. 80 Supply and fixing of 6 amp/230 V AC 5 pin socketswith cover plate Anchor Roma urban/SSK NV/ Eq. make. 81 Supply and fixing of 10 amp/230 V AC one way switch with cover plateAnchor Roma urban/SSK NV/Havells/ Eq. make. 82 Supplying and fixing of following sizes modules, GI box along with modular base & cover plates for modular switches in recess etc as required.12 Module 83 6 Module 84 4 Module 85 Supply installation testing and comm. Of 1200 mm ceiling fan ModeloysterMetallicHavell make/ Bajaj/Crompton(Flavia) of eq. standard( strictly as per approved sample) 86 Supply and fixing of 6 amp/250 V A.C fan dimmerstep type 2 module with cover plate Anchor Roma urban/SSK NV/ Eq. make. 87 Providing and fixing of9 watt LED Bulb ( LMR)Make:- Anchor/orient/havells/ Equivalent 88 S/F testing and comm. Of recessed/ surface mounted ceiling 10/12 WattLED down lighters philips / Havell/ Bajaj/ Crompton make of eq. standard. 89 S/F testing and comm. Of MCBs of the below mentioned capacities in sub main controls legrandC curve Series.6-32 Amp SP MCB 90 c) 40-63amp DP MCB 91 Supplying and fixingof 16 wayhorizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:-Hager/LEGRAND/SSK/Equt.Standard 92 Supply installationtesting andcomm. Of9 sweep exhaust fan Shutter type of havell /Bajaj/Crompton make. 93 Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. 94 Supply, layingpartly overhead partly underground, testing and comm. Of 16mm2 core 650/1100 V grade unarmoured Aluminium cable Havell/Eq. standard make. 95 P/F of Stainless Steel railing including all necessary items complete job for verendeh 96 Carriage of different material from nearest source to site ofwork. Stone agg 40mm / 20 mm & sand Avg 25 Km. 97 Bricks fromAv 120 Km 98 Stones 20KM 99 Provision for signboard and photograph
