Tender For Construction Of Anganwadi Ward 8 - Av. 25 Cm Dia Coconut Post 2 Hire Charges Of Derrick Monkey Rope 3 Stone Aggregate(Single Size): 40 Mm Nominal Size 4 Stone Aggregate(Single Size):20 Mm Nominal Size 5 Coarse Sand (Zone Iii) 6 Portla, Kottayam-Kerala

Tender For Construction Of Anganwadi Ward 8 - Av. 25 cm dia coconut post 2 Hire charges of Derrick monkey rope 3 Stone Aggregate(single size): 40 mm nominal size 4 Stone Aggregate(single size):20 mm nominal size 5 Coarse sand (zone III) 6 Portland Cement 7 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 8 Vibrator (Needle type 40 mm) 9 Stone Aggregate(single size): 10 mm nominal size 10 Stone for masonry work 11 Twisted steel/deformed bars 12 Wall form panel 1250x450xmm 13 Corner angle 45x45x5 mm 2.50 long 14 Column clamp 450x1070 mm 15 Prop 2 m (2-3.5m) 16 Structural steel such as tees, angles, channels and R.S. joists 17 Red oxide Zinc chromate primer 18 Adjustable telescopic prop 3 m (2.02-3.75m) 19 Beam clamp 300-380 mm (450-1070 mm) 20 Adjustable span ESO+SI (2.35-3.40) 21 Gravelly soil (including conveyance) 22 Solid blocks of size 40x20x10cm 23 Solid blocks of size 30x20x15cm 24 Solid blocks of size 30x20x20cm 25 Fine sand (zone IV) 26 Mild Steel round bar above 12 mm dia 27 Flats up to 10 mm in thickness 28 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 29 Plastic emulsion paint 30 Synthetic enamel paint in black or chocolate shade 31 Anjili wood scantls 32 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 33 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 34 Bright finished or black enameled mild steel screws 40 mm 35 Bright finished or black enameled mild steel screws 20 mm 36 Anjili wood planks 37 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 38 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish 39 Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles 40 Oxidised mild steel tower bolt (barrel type) 200x10 mm 41 Oxidised mild steel screws 30 mm 42 Oxidised mild steel handles 125 mm 43 Oxidised mild steel screws 25 mm 44 Brass 100 mm mortice latch and lock with 6 levers without pair of handles 45 Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock 46 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 47 Rawl plug 50 mm (designation 10 nos) 48 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 49 Vitrified floor tile 60x60 cm 50 Vitreous China orrisa type w.c. pan size 580 mm 51 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 52 100 mm S.C.I. trap with vent heel 53 Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers 54 Vitreous china pedestal type wate closet 55 Vitreous china flat back wash basin 550x400 mm 56 15 mm C.P.brass tap 57 C.P. brass waste 32 mm 58 C.I. bracket for wash basin and sinks 59 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 60 PVC pipe 20 mm outer dia 10 kfg/cm2 61 PVC pipe 110 mm outer dia 6kgf/cm2 62 PVC bend 63 mm dia 63 PVC bend 110 mm dia 64 PVC Elbow 63 mm dia 65 PVC Elbow 110 mm dia 66 PVC Tee 63x63x63 mm dia 67 PVC pipe 40 mm outer dia. 10kgf/cm2 68 Polyethylene water storage tank with cover and suitable locking arrangemnet 69 G.I. pipes 40 mm dia 70 Welding by electric plant

INR 2760 /-

INR 19.89 Lakhs /-