Tender For Repairs To Paneling And Other Misc Repairs In Bldg At Chinta, Chinchora And Jai Ghati Mil Stn Under Age (I) Bhalra; 1 Taking down shutters exceeding 1 Sqm but not exc 2 Sqm each complete all as specified and directed by Engineer-in-Charge 2 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge 3 Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge 4 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge 5 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge 6 S & F for 30mm thk Flush shutters solid core construction with block board coreandtwo face is covred with decorativeface veneer with lipping/frame to matchcomplete all as specified and directed by Engineer-in-Charge 7 S & F for 2nd class hardwood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (with sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. complete all as specified and directed by Engineer-in-Charge 8 S & F box type steel windows/ventilator (factory made) outer frame made out ERW tube P section 65x45x25mm and shutter of ERW tube section 50mm x 35mm x 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of Z section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note :- The quoted rate shall also include (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface (ii) 4 nos MS steel lugs made of 20 x 5 mm Iron flat 200mm long (iii) 10 mm Sq Bar grill /guard bar design as per drawing (iv) PCC block for embedding lungs complete all as specified and directed by Engineer-in-Charge 9 S & F powder coated aluminium frame for doors, windows, ventilator with one or more rebates including jointing cleat for fixing etc complte all as specified and minimum thickness of powdere coating 50 micron complete all as specified and directed by Engineer-in-Charge 10 S & F powder coated aluminium door shutters, aluminium section weighting 055kg/m including necessary jointing cleats,galzing clips, rubber reo[rene packing, handles 02 Nos in each pane door, hinges, anodised aluminum snap beading screw etc complete all as specified and directed by Engineer-in-Charge 11 S & F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 055kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fitting such as peg stays 150mm long (01 No) hinge type B-2 100mm long (02 No) suitable handle 01No).complete all as specified and directed by Engineer-in-Charge 12 S & F 5.5mm thick sheet glass fixing for aluminium doors and windows including 25micron reflective type sun control film complete all as specified and directed by Engineer-in-Charge 13 S & F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge 14 S & F in repair 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge 15 S & F in repair 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed by Engineer-in-Charge 16 S & F in repair 300mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and directed by Engineer-in-Charge 17 S & F100mm long medium weight, cold rolled mild steel, Butt hinges,complete all as specified and directed by Engineer-in-Charge 18 S & F in repair hydraulically Door closerAluminium extruded body (Die (extruded regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engineer-in-Charge 19 S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge 20 S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge 21 S & F 0.63mm thick corrugated galvanised steel sheetings with two corrugation side lap fixed with‘L’ type or ‘J’ type cranked hook bolts, nuts and washersas in roof , wall etc with grade of zinc coating 275 gm/sqmetc complete all as specified and directed by Engineer-in-Charge 22 S & F 0.80mm thick plain, Galvanised, mild steel sheeting(ISI marked) gade O with minimum 120grams/square metre with two corrugation side lap and at least 150mm end lap, fixed with L type or J type or cranked hook complete all as specified and directed by Engineer-in-Charge 23 M & L12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in wall / ceiling, flat or slopingcomplete all as specified and directed by Engineer-in-Charge 24 M & L for PVC panelling made up of PVC hollow panels 25/30 cm in width and 10mm thickness, interlocking pattern, of approved shade and design, fixed to walls or ceilings all as per the manufacturers instructions, complete all as specified and directed by Engineer-in-Charge 25 M & L for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600 mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic)in a grid of GI system duly suspended with 4 mmdia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610 mm c/c,so as to form 600 mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified and directed by Engineer-in-Charge 26 S & Fsteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge 27 M & LKota stone slab flooring 20-25mm thick over20mm thick screed bed in cement mortar 1 : 3 with cement slurry @ 4kg/sqm jointed and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge 28 M & L for 20mm thick polishedKotain skirting laid over 10 mm thick backing coat in cement mortar 1:3 jointed with dado and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge 29 M & L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, cocking platforms and likeincluding pointing with white cement (1:2) using marble dust with admixture of pigment to match withshade of graniteand 15 mm thick screed bed or bedding layers in cement mortar 1:4overbrushing with neat cement slurry with 3.00 Kg of cement per sqmcomplete all as specified and directed by Engineer-in-Charge 30 S & FPVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening but wood grain printed PVC sheet & edges will be painted to match printed sheet, etc complete all as specified and directed by Engineer-in-Charge 31 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge 32 S & F in repair Toilet paper holder, vitreous China, white, box type, etc complete all as specified and directed by Engineer-in-Charge 33 S & F for bitumen based water proofing film reinforced with PVC film having minimum thickness of 0.6mm laid on roof surfaces by forced application including cleaning of surfaces complete all as specified and directed by Engineer-in-Charge 34 S & F 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-Charge 35 S & F for PVC waste pipe 32mm bore complete all as specified and directed by Engineer-in-Charge 36 S & F stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge 37 M & L for 3mm thk sheet glass ordinary quality and glazing with oil putty/ wooden beads in square n exc 0.5 Sqm in each pane incl hacking out old glass panes complete all as specified and directed by Engineer-in-Charge 38 M & L for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge 39 M & L for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
