|
| 1 | Name of the Monument / Site: Archaeological Museum Building, Kondapur, Sangareddy Dist. |
| 2 | Provision for treatment to the wall cracksincluding racking out wall crack, filling the crack filling sealant chemical of IS standards and finishing the crack surface matching with wall surfacesby using approved brand and primer coat including material charges, labour charges and all necessary applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials. (Quantity may vary as per site condition) |
| 3 | Provision for water repellent treatment to the exterior wall surfaces usingwater repellent chemicals of IS standards including treatment to the existing hair cracks inclusive of material charges, labour charges and all necessary applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials (Quantity may vary as per site condition) |
| 4 | Provision forpatch plaster using cement mortar 1:4 of thicknessof 20 mm including cutting the patch in proper shape, raking out joints and plastering the surface of wallsinclusive of material charges, labour charges and all necessary applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials (Quantity may vary as per site condition) |
| 5 | Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.60 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 part 4 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on inter locking metal silhouette T grid of hot dipped galvanized iron section of 0.33 mm thick galvanized @ 120 gms per sqm including both sides, comprising of main T runners of size 15x32mm of length 3600mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600 x 600mm suspended from ceiling using galvanized mild steel items galvanizing @ 80 grams per sqm i.e. 50mm long, 8mm outer diameter, M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85x25x2 mm. Galvanized iron permitter wall angle of size 24x24x0.40mm of length 3000mm to fixed on periphery wall/partition with help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall SS screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles inclusive of labour charges,all necessary applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials (Quantity may vary as per site condition) |
| 6 | Provision made for earthwork excavation by manual meansincludingall necessarymaterials,labour charges applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials (Quantity may vary as per site condition) |
| 7 | Provision made for laying of PCC 1:2:4includingall necessarymaterials,labour charges applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials (Quantity may vary as per site condition) |
| 8 | Provision made laying of stone apron and pathway with rough shahabad stone slabs of thickness 40mm over the bed of PCC 1:2:4 100mm thickincluding pointing the joints with CM 1:4 inclusive of labour charges,all necessary applicable taxes etc., all complete as per the directions of the site Incharge/ ASI officials (Quantity may vary as per site condition) |
| 9 | Providing and fixing 30mm thick FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made from MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specification and drawing. (Quantity may vary as per site condition) |
| 10 | Level) after deductions Qty 1700.761- 450.328= 1250.433) |
