Supply Of Empty Hydrogen Gas Cylinders In Ptpp, Parichha, Jhansi (Up). , Hydrogen Cylinder(Empty): Cap-7Cum/47L Specification:1) Design Code : Is-7285-Part-Ii-Latest Version 2) Water Capacity : 46.7 Litrs. 3) Working Pressure : 150 Kg/Cm2 4) Test Pressure : 250 Kg/Cm2 5) O. D.: 232Mm (Min.) 6) Thickness : 5.3Mm (Min.) 7) Length: 1370Mm (Approx.) 8) Tare Weight : 52 Kg (Approx.) 9) Bottom: Concave 10) Valve: As Per Is-3224-Latest Version Hydrogen Gas Cylinder (Empty):Is:7285 :Capacity-7 M3/ (46.7) Litres Of Water Capacity High Pressure Seamless Empty Hydrogen Gas Cylinder With Cap & Valve As Per Is: 3224, Painted As Specified Under Gas Cylinder Rules, 2004,Design Code - As Per Is: 7285-Part-Ii-2004,Water Capacity - 46.7 Litrs, Maximum Working Pressure - 150 Kg/Cm2, Hydrostatic Test Pressure - 250 Kg/Cm2, Outer Dia Of Cylinder - 232 Mm, Minimum, Wall Thickness - 5.3Mm, Tare Weight - Approx. 52 Kg, Length Of Cylinder - Apporax 1370 Mm Having Flat Type Concave Bottom With Necking And Valve. Any Other Condition: Inspection/Test Certificate Duly Signed By Bis Authority & Approval Letter Of Chief Controller Of Explosives, Permitting Filling Of Gas In These Cylinders Along With The Cylinders Will Be Provided By The Vendor. Hydro Test Of Cylinder To Be Carried Out By Vendor Before Delivery And Hydro Test Certificate To Be Submitted At The Time Of Delivery Of Cylinder. Each Cylinder Shall Be Accompanied By The Following Certificates. A-Approved From Chief Controller Of Explosive. B-Manufacturers Test Certificate. C-Hydraulic Test Certificate. Inspection Report From Bis To Be Submitted. All Cylinders Should Be Marked (Engraved) With Ptpp (In Capital Letters Only)Along With Cylinder No And Test Date So As To Be Identified Distinctly At The Time Of Refilling As Well As Within The Plant. Acceptance Shall Be Based On Visual Inspection, And Review Of Certificate Of Compliance From The Manufacturer On Receipt At Centralstore Of Ptpp Parichha Specification: 1) Design Code : Is-7285-Part-Ii-Latest Version 2) Water Capacity : 46.7 Litrs. 3) Working Pressure : 150 Kg/Cm2 4) Test Pressure : 250 Kg/Cm2 5) O. D.: 232Mm (Min.) 6) Thickness : 5.3Mm (Min.) 7) Length: 1370Mm (Approx.) 8) Tare Weight : 52 Kg (Approx.) 9) Bottom: Concave 10) Valve: As Per Is-3224-Latest Version Hydrogen Gas Cylinder (Empty):Is:7285 :Capacity-7 M3/ (46.7) Litres Of Water Capacity High Pressure Seamless Empty Hydrogen Gas Cylinder With Cap & Valve As Per Is: 3224, Painted As Specified Under Gas Cylinder Rules, 2004,Design Code - As Per Is: 7285-Part-Ii-2004,Water Capacity - 46.7 Litrs, Maximum Working Pressure - 150 Kg/Cm2, Hydrostatic Test Pressure - 250 Kg/Cm2, Outer Dia Of Cylinder - 232 Mm, Minimum, Wall Thickness - 5.3Mm, Tare Weight - Approx. 52 Kg, Length Of Cylinder - Apporax 1370 Mm Having Flat Type Concave Bottom With Necking And Valve. Any Other Condition: Inspection/Test Certificate Duly Signed By Bis Authority & Approval Letter Of Chief Controller Of Explosives, Permitting Filling Of Gas In These Cylinders Along With The Cylinders Will Be Provided By The Vendor. Hydro Test Of Cylinder To Be Carried Out By Vendor Before Delivery And Hydro Test Certificate To Be Submitted At The Time Of Delivery Of Cylinder. Each Cylinder Shall Be Accompanied By The Following Certificates. A-Approved From Chief Controller Of Explosive. B-Manufacturers Test Certificate. C-Hydraulic Test Certificate. Inspection Report From Bis To Be Submitted. All Cylinders Should Be Marked (Engraved) With Ptpp (In Capital Letters Only)Along With Cylinder No And Test Date So As To Be Identified Distinctly At The Time Of Refilling As Well As Within The Plant. Acceptance Shall Be Based On Visual Inspection, And Review Of Certificate Of Compliance From The Manufacturer On Receipt At Centralstore Of Ptpp Parichha Hydrogen Cylinder(Empty): Cap-7Cum/47L Specification: 1) Design Code : Is-7285-Part-Ii-Latest Version 2) Water Capacity : 46.7 Litrs. 3) Working Pressure : 150 Kg/Cm2 4) Test Pressure : 250 Kg/Cm2 5) O. D.: 232Mm (Min.) 6) Thickness : 5.3Mm (Min.) 7) Length: 1370Mm (Approx.) 8) Tare Weight : 52 Kg (Approx.) 9) Bottom: Concave 10) Valve: As Per Is-3224-Latest Version Hydrogen Gas Cylinder (Empty):Is:7285 :Capacity-7 M3/ (46.7) Litres Of Water Capacity High Pressure Seamless Empty Hydrogen Gas Cylinder With Cap & Valve As Per Is: 3224, Painted As Specified Under Gas Cylinder Rules, 2004,Design Code - As Per Is: 7285-Part-Ii-2004,Water Capacity - 46.7 Litrs, Maximum Working Pressure - 150 Kg/Cm2, Hydrostatic Test Pressure - 250 Kg/Cm2, Outer Dia Of Cylinder - 232 Mm, Minimum, Wall Thickness - 5.3Mm, Tare Weight - Approx. 52 Kg, Length Of Cylinder - Apporax 1370 Mm Having Flat Type Concave Bottom With Necking And Valve. Any Other Condition: Inspection/Test Certificate Duly Signed By Bis Authority & Approval Letter Of Chief Controller Of Explosives, Permitting Filling Of Gas In These Cylinders Along With The Cylinders Will Be Provided By The Vendor. Hydro Test Of Cylinder To Be Carried Out By Vendor Before Delivery And Hydro Test Certificate To Be Submitted At The Time Of Delivery Of Cylinder. Each Cylinder Shall Be Accompanied By The Following Certificates. A-Approved From Chief Controller Of Explosive. B-Manufacturers Test Certificate. C-Hydraulic Test Certificate. Inspection Report From Bis To Be Submitted. All Cylinders Should Be Marked (Engraved) With Ptpp (In Capital Letters Only)Along With Cylinder No And Test Date So As To Be Identified Distinctly At The Time Of Refilling As Well As Within The Plant. Acceptance Shall Be Based On Visual Inspection, And Review Of Certificate Of Compliance From The Manufacturer On Receipt At Centralstore Of Ptpp Parichha
