Tender For Beautification Work Of Chakeri Park At Chakeri Kanpur - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 60 metreslead.(dsr706) 3 12mmcementplasterofmix:1:4(1cement:4coarsesand) qty same as Item no 1(13.4.1) 4 Brick work with common burnt clay(non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)qty same as item No 1(6.4.1) 5 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundationetc. complete.(2.25(a)) 6 Dismanteling of tiled floor including disposal & refuseupto 60 mtr. All complete.(sor 699) 7 ProvidingandlayingRectifiedglazedfloortilesofsize 300x300mm(thicknesstobespecifiedbythe manufacturer), of 1st quality conforming to IS (1 : 15622, ofapprovedmake,inallcolours,shades,exceptWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the jointswithwhitecementandmatching pigmentsetc., complete. Qty as Item no 5(11.39) 8 providing and fixing of M.S. Grill of approved drawinganddesign all complete.(dsr new) 9 Painting and varnishing with two coat of approved qualitypaint all complete (grill) Qty same as above item no 7(dsr 641+642+19.29) 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andbinding all complete For gate.(10.1) 11 centering and shuttering including strutting propping etc. And removal of form for walls,propping etc. And removal of form for walls,(any thickness )including attached pilasters,buttersses,plinth and string courses etc.(4.3.2) 12 Reinforced cement concrete work excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) all work uptoplinth level.(5.1.2) 13 Providing and applying white cement based puttyof approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete.(dsr news 2023-24) 14 Finishing walls with Premium Acrylic Smooth exterior paint(apex) with Silicone additives of required shade : New work (Two or more coats applied ) (dsr new sl no 342023-24) 15 providing benches of approved drawing and design allcomplete(sor 2023-24 sl no 13) 16 Pro/installation of 2 HP submercible pump including 150mm dia boring all complete(Approved Rate) 17 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) .under boundry below plinthbeam.(4.1.8) 18 construction of shed (Approved Rate) 19 providing dustbin 20 ms or iron work in heavy size 21 PART- B 22 Clearingjungleincludinguprootingofrank vegetation,grass,brushwood, treesandsaplingsof girthupto30cmmeasuredataheightof1m above groundlevelandremovalofrubbishuptoa distanceof50moutsidethe periphery of the areacleared. 2.31 23 Removal of existing useless hedge of murega exotica plants asume / labour remove 100.00 Rmt hedge perDay 24 No of laboursl no 16 25 Devlopment of Hedge 26 Devlopment of lame 27 Site survey 28 Digging of pits of following size 29 Supply & Mixing locak sand @0.01Cum /Plant 30 Supply & mixing F.Y.M@ 0.01 cum /plant 31 fretilizers 32 Supply & mixing urea @ 00.04 kg/plant 33 Supply & mixing S.S.P. @ 00.03 kg/plant 34 Supply & mixing M.O.p @ 00.03 kg/plant 35 Supply & spraying cholorophyl @0.004 ltr/Plant 36 Providing well devloped plants of below species 37 Ashok Pendula 38 plumeria alba 39 Pride of India 40 ficus benjamina 41 calliandra 42 Chandani varigated 43 hamellia patens 44 hibiscus 45 ficus blakema/regenald 46 One time irrigation 47 One time Weeding &Cleaning 48 Maintinance of plants for one year 49 Maintinance of shrubs for one year 50 Maintinace of lawn upto one year 51 maintinance of hedge upto one year 52 PART - C 53 Earthwork: Excavation in trenches for foundations,pipes cables etc. in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 50m and drassing of sides and ramming of bottom disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m .(a) 0 to 1.5m 54 E/W in Cutting or in embankment in ordinary soil excavation to be done in form of regular pits not exceeding 1/2 M in depth and work embankment to be in 20cm layers including ramming and dressing the surface to required level and slopes and also including 1.5 M lift and 30M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with 30m distance as directed by the Engineer incharge with 8Km cartage including. 55 Cartage of earth up to 5.0 km 56 Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation and floors. 57 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates) in raft foundation and footing excluding of reinforcementincluding its bending the same with 24 BWGbinding wire and necessary centering & shuttering etc and also including supply of all material, labour, T&P etc. required for proper completion of work. 58 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete for Beam . 59 Class-150brick work in 1:6 (1 cement : 6 coarse sand ) in Foundation & Plinth including supply of all material, labour, T&P etc. required for proper completion of work . 60 Class-150brick work in 1:4 (1 cement : 4 coarsesand ) in super structure including supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 303+diff.)(4850+150) 61 Supply and Fixing of 110 mm (OD) dia 6 Kg/Sq cm PVC ISI marked Phenolex and or other approved quality complete with rose, bend 9ms clamp 25mm x3.0 mm of approved design fixed in wall and including repair of plasters, points if damaged during fixing of pipe. (SI No. 730/3) Chapter 19 62 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete for slab . 63 Providing and laying Cement concrete 1:24 (1 cement: 2 coarse sand 4 graded stone grit 20 mm nominal size) including supply of all materials labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation and floors.(s.1. NO-279 A) 11 64 Mild steel (Tor steel or plain) or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured up to floor two level . (PWD S.I No- 504) 65 40 mm thick Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate of size 20 mm nominal size )laide in one layer , finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ). 66 Providing and Fixing Glass strips 3.7mm thick & 2.5 cm deep. 14 including supply of all materials. labour and T&P etc. required for proper completion of the work.AR ASPER DSR-11.13.1 67 12 mm cement plaster 1:6 (Cement & Coarse sand) in single coat on fair side of single or half brick wall for interior plastering including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. no extra for mixing any additive. (PWD SI.No-17.58+diff.) (128+6)ROUGH/FAIR 68 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. to prepare the surface even and smooth complete. DSR 13.80/16 69 Painting or Varnishingon iron works in small areas or new wood workwith one coat of ready mixpriming paint and two coat of approved superior quality ready mixed paint of clear synthetic varnish (Berger,dulux,,Narolac,Shalimar) including supply of al 70 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 71 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. (DSR 11.38/16) 200X300 72 Supply and fixing of 35 mm thick commercial quality plywood flush door shutter conforming to IS 2202 part-1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges bolts nuts handles springs and other fitting with necessary screws etc all complete. (PWD S.I No. 470 A.) 73 16mm sliding bolt 10 74 tower bolt 6 75 Handle 6 76 Providing and fixing factory made Duroplast uPVC white colour louvre window comprising of uPVC multi-Chambered frame with size 50mm 22 x 50 mm extruded profiles duly including supply including supply of all material labour T&P etc. required for proper completion.Size 450 x 600 mm Louver Window 77 Providing and fixing factory made wpc door frame made of PVC extruded sections of size 77 mm x 58 mm including supply including supply of all material labour T&P etc. required for proper completion. 78 Providing and fixing 37 mm thick factory made wpc Door shutter. styles and rails made of PVC hollow extruded printed(Door Shutter) including supply including supply of all material labour T&P etc. 79 Supply and fixing of hexagonal fan box with hexagonal side of approximate 80mm in length fabrication from 16 SWG M.S sheet in corporate 10mm sheet in corporate 10mm and M.S round bar dully bent for supporting fan hanger etc all complete. SI No 1149/elctrical SOR 2016 80 Providing and fixing PVC spout pipe 50 mm dia and 40 Cm Length 26 including supply of all materail, labour, T&P etc completion of the work as per direction of E/I. (A/R) 81 Sand filling in plinth including supply of necessary quantity of sand.to the site of work and including watering ramming consolidating and dressing completeetc. labour and T&P etc required for the proper completion of the work.Lead 50 m and lift up to 1.50 m.(PWD S.I No- 255+ch 1/7b) (500+70) 82 Painting or Varnishingon iron works in small areas or new wood workwith one coat of ready mixpriming paint and two coat of approved superior quality ready mixed paint of clear synthetic varnish (Berger,dulux,,Narolac,Shalimar) including supply of all material Labour & T&P etc. required for proper complete of work paint to be used should confirm to the ISI no 1031950. (PWD SI.No-641+642) 83 GATE AND WATER TAP PLATFORM 84 Earthwork: Excavation in trenches for foundations,pipes cables etc. in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 50m and drassing of sides and ramming of bottom disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m .(a) 0 to 1.5m 85 Providing and laying in cement concrete in 8:4:1 ( stone ballast 8 (40 mm nominal size) : 4 approved coarse sand : 1 cement and curing complete, including cost of formwork in foundation and floors. 86 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates) in raft foundation and footing excluding of reinforcementincluding its bending the same with 24 BWGbinding wire and necessary centering & shuttering etc and also including supply of all material, labour, T&P etc. required for proper completion of work. 87 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete forcolumn work 88 Mild steel (Tor steel or plain) or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured up to floor two level . (PWD S.I No- 504) 89 reinforcement for rcc @ 1%(.69+.75=1.44 M3 RCC) 90 15 mm thick plaster with cement and Coarse sand of 2.25 F.M. mortar 1:4 in single coat on fair side of single or half brick wall surface including internal rounded angles, chamfers no exceeding 80 mm in girth and finishedeven and smooth.(PWD SI.No-17.58) 91 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. to prepare the surface even and smooth complete. DSR 13.80/16 AND 92 Finishing walls withpremium Acrylic Smooth exterior paintwith cilicone additive of required shade :13.46.1New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) DSR/16/13.46.1 93 Mild Steel oriron work small size for fabrication of M.S. grill and stair case railing wrought to required for including of supply of steel bolts nuts and wastage etc and their fixing required for proper completion of the work (PWD S.I no 502 (II) ) 94 Painting or Varnishing with primer coat of readymixed priming paints & two coat of appd. Superior quality paint & two coat of appd. Superior quality paint all complete. 95 supply and fixing chequered pcc tiles 22 m thick in footpath and courtyard jointed with neat cement slurry mixed with pigment matchingthe shade of tile including rubbing and cleaning on 20 mm thick bed of cement mortar 1:4 (1cement:4coarse sand) 96 40 mm thick Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate of size 20 mm nominal size )laide in one layer , finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ). 97 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 98 M-150 Brick work in 1:4 cement and fine sand of mortar in foundation and plinth including supply of all materials labour T&P etc. required for proper completion of work. PSR 99 M-150 Brick work in 1:4 cement and fine sand of mortar ABOVE foundation and plinth including supply of all materials labour T&P etc. required for proper completion of work. PSR 100 JHOOLA AND OTHER KIDS PLAYING EQUIPMENTS 101 double arc swing 102 horse sea saw 103 zig zag slide 5 ft 104 twin climber 105 horse mgr 106 PART-B WATER SUPPLY & SANATRY FITTING WORK 107 Chlorinated Polyvinyl Chloride (CPVC) pipes.having thermal stability for hot & 15 mm nominal outer dia Pipes (DSR No 18.8.1) 82 108 Same as above item but for 20 mm CPVC Pipe (DSR-18.8.2) 109 Same as above item but for 25 mm CPVC Pipe (DSR-18.8.3) 110 Supply and fixing of PVC SWR ring fit (as per IS 13592 with latest 84amedments) type-A) phenolex prince suprime make soil waste and vent pipe dia 110 mm (OD) 111 Supply and fixing of SWR phenolex prince suprime make nahani trap 85 100 mm x 75 mm embeded in cement oncrete 1:2:4 112 Supply and fixing of ISI mark parrywater/ Jonshon / Cerra make Orrisa pattern WC pan size 580 mm of approved quality including 10 lit capacity low level PVC Cistern with all accessories. The rate is inclusive of supply and fixing of WC pan-1 no, low level cistern PVC 10 lit capacity-1 No, SWR P-trap-1 No, Flush pipe 30 mm dia PVC (of approved make- 1 PVC connection of heavy duty (appropriate length) and fixing is to done in cement concrete 1:2:4 (1 cement, 2 coarse sand 4 stone grit 20 mm size) along with all other consumables necessary for fixing etc. complete required for proper completion of the work as per direction of E/I. AR AS PER DSR 17.1 113 Providing and fixing of CP BRASS jali 100 mm dia as per directions of 87 EЛ(A/R) incuding of all material, labour and T&P etc. required for proper completion of the work 114 Supplying and fixing of 20 mm dia Heavy Duty Gate Valve 1.S.I. marked as per directions of E/AR AS PER DSR 18.18.2 115 Supplying and fixing of CP Brass Bib Cock (15 mm dia) Heavy Duty Long body of approved make as per directions of EЛ(A/R) incuding of all material, labour and T&P etc. required for proper completion of the work.AR AS PER DSR 18.49.1 116 Supplying and fixing of CP Brass Bib Cock (15 mm dia) Heavy Duty short body of approved make as per directions of E/l. DSR-18.15.1 810 incuding of all material, labour and T&P etc. required for proper completion of the work. AR AS PER DSR-18.53.1 117 Supplying and fixing of CP angle valve (15mm dia) heavy duty of approved make as per directions of E/I.AR AS PER DSR-18.53.1 118 Making House connecting chamber size 600mm x600mm x600 mm with class 150 B/W in 1:4 cement and coarse sandmorter base concrete 1:5:10 119 Construction of chamber of Internal size 046mx0 45x0.45m with class 150 B/W in 14 cement and coarse sand morter base concrete 1:5:10 (1 cement: 5 coarse sand: 10 Brick ballast 40 mm size) 12mm thick plaster in 14 cement and coarse sand morter with neat finished and 8cm thick PCC 124 (1 cement 2 coarse sand 4 stone grit 20 mm size in floor and cunet including RCC. Cover with 8.0cm thick including cost of all material, labour T&P etc required for proper completion of the work (A/R) 120 Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap incuding of all material, labour and T&P elc. required for proper completion of the work.AR AS PER DSR 17.7.7 121 Supply and hosting of 1000 litre capacity(Syntex or equivalent as per ISI) ISI marked low density polyethylene seamless one piece water Storage Tank and placing the same in proper position including all taxes labour T&P etc required for proper completion of work (PWD SI no-ch-19/2) 122 Wiring point for light with 1.5 sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 1.5 sqmm FRLSH PVC insulted multistrand copper conductor cable as earth wire piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc complete in all respect as directed including matching colour wsh (SOR 2018 E/M) 123 Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand in PVC conduit pipe partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm FRLSh PVC insulated multistrand copper conductor cable as earthwire, piano type switch& ceilingrose on 3 mm. thick backelite sheet etc., complete in allrespect includingmatchingcolour wash.(SOR 2018 E/M) 124 Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrandsinglecore copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting.complete with 14 SWG copper earth continuity wire and piano type switch and socket etc., complete in allrespect includingmatchingcolour wash.(SOR 2018 E/M) 125 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universalsocket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. (SOR 2018 E/M) 126 Add for light/fan point with modular type switch in place of piano type switch (SOR 2018 E/M) 127 Supply & wiring of submain with two no 4.0sqmm FRLSH PVC insulated 1100v grade multistrand single core copper conduter cable in wall and partyly laid in slab alongwith. (SOR 2018 E/M) 128 Supply & wiring of submain with two no 6.0sqmm FRLSH PVC insulated 1100v grade multistrand single core copper conduter cable in25mm dia heavy duty. (SOR 2018 E/M) 129 Add for plug point with modular type switch and socket in place of piano type switch an socket. (SOR 2018 E/M) 130 Fan box cover of 3mm thick bakelight sheet of hexagonal/round shape on existing fan box complete in all respect direction of E/I MR. (SOR 2018 E/M) 131 Supply and laying of 50sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top.One surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be aproperly connected with the earth conductor by lamps etc. (SOR 2018 E/M) 132 S/F round bakelight All/PVC Junction Box cover on exsiting Junction Box complete in all respect as per direction of E/I M/R 133 Supply and Burying of 600mm x 600mm x 6mm G.I Plate Vertically forearthing with its top at least 3 meters below ground level completewith 20mm dia GI pipe. (SOR 2018 E/M) 134 S/F of electronic fan regulator 120-280V ISI marked on the existing swich bord including making connection required material, labour T&P etc for proper completion of work to the satisfaction of Enfineer in charge of work. (SOR 2018 E/M) 135 S/F of two number 8 SWG GI wire in 15mm dia Fl pipe for earthing laid in 136 Add for power plug point with modular type switch and socket in place of piano type switch an socket (SOR 2018 E/M) 137 Supply and wiring of submain with two number 2.5 sqmm FRLSh PVC insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy guage (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along ith reinforcement before concreating, with one no. 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respect. (SOR 2018 E/M) 138 S&F surface/flush mounting 4 ways SPN distributaion board (for Common area lighting) without MCB complete in all respect, as directed at site by Engineer in charge. (SOR 2018 E/M) 139 S&F surface/flush mounting 8 ways SPN distributaion board (for Common area lighting) without MCB (SOR 2018 E/M) 140 S&F of 40 Amp. DP Isolator (SOR 2018 E/M) 141 S&F of 6 Amp to 32 Amt. SPMCB (10KA) C Cure (SOR 2018 E/M)
