E Tender For The Office Renovation Works At Alappuzha , E-Tender For Office Renovation Works At Alappuzha For More Details Refer Tender Documents , Providing And Fixing Flat Pressed 3 Layer Medium Density Particle Board Or Graded Particle Board (Grade I) Is: 3087 Marked, In Ceiling With Necessary Nails Etc. Complete ( Frame Work To Be Paid Separately):12 Mm Thick , Providing 10 Mm Thick Plaster Of Paris (Gypsum Anhydrous) Ceiling Up To A Height Of 5 M Above Floor Level, Over First Class Kail Wood Strips 25X6 Mm With 10 Mm Gap In Between And Reinforced With Rabbit Wire Mesh Fixed To Wooden Frame (Frame Work To Be Paid Separately) :Flat Surfaces , Providing 10 Mm Thick Plaster Of Paris (Gypsum Anhydrous) Ceiling Up To A Height Of 5 M Above Floor Level, Over First Class Kail Wood Strips 25X6 Mm With 10 Mm Gap In Between And Reinforced With Rabbit Wire Mesh Fixed To Wooden Frame (Frame Work To Be Paid Separately) :Curved Surfaces , Providing And Fixing, In Position Concealed G.I. Section For Wall Paneling Using Board Of Required Thickness Fixed On The 'W' Profile (0.55 Mm Thick) Having A Knurled Web Of 51.55 Mm And Two Flanges Of 26 Mm Each With Lips Of 10.55 Mm, Placed @ 610 Mm C/C In Perimeter Channel Having One Flange Of 20 Mm And Another Flange Of 30 Mm With Thickness Of 0.55 Mm And Web Of Length 27 Mm. Perimeter Channel Is Fixed On The Floor And The Ceiling With The Nylon Sleeves @ 610 Mm C/C With Fully Threaded Self-Tapping Dry Wall Screws. Board Is Fixed To The 'W' Profile With 25 Mm Countersunk Ribbed Head Screws @ 200 Mm C/C., All Complete As Per The Drawing & Directions Of Engineer-In-Charge, The Joints Of The Boards Are Finished With Specially Formulated Jointing Compound And 48 Mm Wide Jointing Tape To Provide Seamless Finish. ≪Br≫Acoustic Gypsum Panels Of Size 60X60x1.2 Cm , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete , Providing And Fixing 12Mm Thick Plywood, In Floor With Necessary Nails Etc. Complete ( Frame Work To Be Paid Separately) , 7Providing And Fixing Bright Finished Brass Butt Hinges With Necessary Screws Etc. Complete:125X85x5.5 Mm (Heavy Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete:250X10 Mm , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete , Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc.Complete. , Providing Wood Work In Frames Of False Ceiling, Partitions, Etc. Sawn And Fixed In Position:Sal Wood , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Second Class Teak Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Shutters For Doors, Windows And Clerestory Windows, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessery Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer - In-Charge. Second Class Teak Wood35 Mm Thick Shutters. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately): For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5.50 Mm Thickness , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , Providing And Fixing Marine Plywood Table Having 17Mm Thickness Of Size 2.4M X 0.9M X 0.45M With Six Drawer And Six Seating Provision Including All Labour Charges , Providing And Fixing Marine Plywood Table Having 17Mm Thickness, Wooden Panelling On Front Side Of 25Mm Thickness And Lettering On Front Side (Size 4.5M X 0.9M X 0.45M) With Six Drawer And Six Seating Provision Including All Labour Charges. , Providing And Fixing Marine Plywood Table Having 17Mm Thickness Of Size 1.5M X 0.9M X 0.45M With Two Drawer And Two Seating Provision Including All Labour Charges, (20 No Of Table). , Normal Cushion Chair , Executive Revolving Chair With Cushion Seat And Back Ergonomic Design High Back With Headrest Heavy Duty Metalic Base , Executive Revolving Chair With Cushion Seat And Back Ergonomic Design Medium Black With Metalic Base. , Executive Revolving Chair With Cushion Seat And Back Ergonomic Design Medium Black With Metalic Base. , Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.8 Module , Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.12 Module , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 Amps Modular Socket Outlet And 15/16 Amps Modular Switch, Connection Etc. As Required , Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required , Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required , Erection Of Wall Bracket / Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Gls Lamps Per Fitting, Complete With All Accessories Including Connection Etc. As Required. , Wiring For Light/ Power Plug With 2X4 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required2 Run Of Cable , Supply, Installation, Testing & Commissioning Of 15W/18W Led ,Circular Panel Light Of Approved Make With Complete Accessories Duly Wired Up For Use On 230V Ac , Supply And Installation Of 2M Patch Cord , Supply And Installation Of 1M Patch Cord , Supply And Installation Of 16 Port/24Port Network Switch Tp Link , Supply And Installation Of Patch Panel , Supply & Installation Of Cat 6 Information Outlet With Face Plate Single , Supply And Installation Of Projector With Foldable Screen , Supply And Installation Of Projector With Fixed Screen , Supply And Installation At A Table Of Microphone , (360 Degree ) Make Ahuja , Supply And Installation Of Speaker Of 30W Make : Ahuja , Supply And Wiring Of Amplifier Ahuja 150W , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same Incase Of Recessed Conduit As Required.20 Mm , Supply And Fixing The Following Modular Switches & Accessories In The Existing Frontplates And Giving Necessaryonnections As Required (Rohs Compliant )6A 3 Pin Plug Top , Supply & Installation Of Light Fittings Suspended On Ball & Socket Arrangement With19 Mm Down Rod Supply, Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made Of .5Mm Thick Crca Sheet Accessories And Lamps Etc. Including Supplying And Fixing Ball And Socket Arrangements On Pvc Round Block, Suspension Down Rod Of 19Mm Dia Ms Conduit Up To 2X30cm Length Including Painting And Wiring The Down Rod With 16/0.20Mm 3 Core Round Copper Conductor Flex Wire Conforming To Relevant Iss Or Extending The Original Wiring And Giving Connections Etc. A Required.1200 Mm 2X20w Led Lamp With Box Type Fixture , Supply Of Wireless Microphone , Large Gooseneck Mic With Base & 20M Cable With With Proper Connectors , Supply And Fixing Of Wall Fan - High Winding 3 Speeds And Swing Control With Detachable Grill And Easy To Clean Orginal New Abs Plastic Corrosion Resistant Powder Coated Guards , Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988, Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1.00 Sq Mm Frls Pvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade, Including Providing Switch Board Main And Continuous Earthing With No.14 Swg Bare Copper,Required Quantity Of Copper Earth Socket, Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes, Modular Type Front Plates (White) Etc. Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall, Colour Washing Etc. Complete. All The Terminations In The Switch Boards And Dbs Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties, Tie Mounts Etc As Required. (Rohs Compliant Modular Accessories).Single Control Ceiling Fan Point With 6 A, 3 Plate Ceiling Rose & With Socket Size Stepped Electronic Regulator. - Short Point , Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988, Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1.00 Sq Mm Frls Pvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade, Including Providing Switch Board Main And Continuous Earthing With No.14 Swg Bare Copper,Required Quantity Of Copper Earth Socket, Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes, Modular Type Front Plates (White) Etc. Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall, Colour Washing Etc. Complete. All The Terminations In The Switch Boards And Dbs Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties, Tie Mounts Etc As Required. (Rohs Compliant Modular Accessories).Single Control Light Point With 6A, Plate Ceiling Rose - Medium Point , Supplying And Fixing Following Piano Type Switch / Socket On The Existing Switch Box/ Cover Including Connections Etc. As Required.6 Pin 15/16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate& Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5/6Amps Switch , Wiring For Circuit/ Sub Main Wiring Along With Earth Wire With The Following Sizes Of Frls Pvcinsulated Copper Conductor, Single Core Cable In Surface/ Recessed Steel Conduit Asrequired2x2.5 Sq.Mm+1X2.5 Sq.Mm Earth Wire , Supply Conveyance, Installation, Testing And Commissioning Of 40W Led Flood Lightoutput Greater Than 105Lumen/W 4000-6000 K With Ip 66 Protection Led Chip Makecree/Lumilled/Nichea With Power Factor Greater Than 0.95 At Full Load, Internal Surge Protection Up To 8 Kv,And Aluminium Pressure Die-Cast Powder Coated Housing, Acrylic Cover Complete With Thd Less Than10%, Power Factor Greater Than 0.98, Rohscompliant, Duly Wired Up For Use On 230 V Ac Supply. Driver Compartment Should Beseperatly Accessiblefor Maintenance (Lm 79&80 Certificates From Nabl Accreditedthird Party Lab To Be Produced Mentioning Chip Manufacturer) , Providing And Fixing Marine Plywood Computer Table Having 17Mm Thickness Of Size 1.2M X 0.9M X 0.45M With One Drawer, One Keyboard Puller And One Cpu Cabin Including All Labour Charges, (7 No Of Table). , Providing And Fixing Marine Plywood Computer Table Having 17Mm Thickness Of Size 0.9M X 0.9M X 0.45M With With One Drawer, One Keyboard Puller And One Cpu Cabin Including All Labour Charges,(8 No Of Table) , Executive Revolving Chair With Cushion Seat And Back Ergonomic Design High Back With Headrest Heavy Duty Metalic Base , Normal Cushion Chair , Executive Revolving Chair With Cushion Seat And Back Ergonomic Design Medium Black With Metalic Base , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions,I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc.Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dashfasteners To Be Paid For Separately): For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges /Pivots And Making Provision For Fixing Of Fittings Wherever Required Including Thecost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid Forseparately)Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5.50 Mm Thickness , Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , . Providing Wood Work In Frames Of False Ceiling, Partitions, Etc. Sawn And Fixed In Position:Sal Wood , . Conforming To Is: 14616 And Tads 15:2001 (Part B), Including Isi Marked M.S.Pressed Butt Hinges Bright Finished Of Required Size With Necessery Screws, All Complete As Per Directions Of Engineer-In-Charge And Panelling With Panels Of:12 Mm Thick Plain Grade- 1, Medium Density Flat Pressed Three Layer Particle Board Fpt- I Or Graded Wood Particle Board Fpt-I, Is : 3087 Marked, Bonded With Bwp Type Synthetic Resin Adhesive As Per Is: 848: , . Providing 10 Mm Thick Plaster Of Paris (Gypsum Anhydrous) Ceiling Up To A Height Of 5 M Above Floor Level, Over First Class Kail Wood Strips 25X6 Mm With 10 Mm Gap In Between And Reinforced With Rabbit Wire Mesh Fixed To Wooden Frame (Frame Work To Be Paid Separately) :Flat Surfaces , Providing And Fixing Bright Finished Brass Handles With Screws Etc. Complete:125 Mm , Providing And Fixing Pre- Laminated Flat Pressed 3 Layer ( Medium Density) Particle Board Or Graded Wood Particle Board Is : 3087 Marked, With One Side Decorative And Other Side Balancing Lamination Grade I, Type Ii Exterior Grade Is : 12823 Marked, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer ( Fittings To Be Paid Separately)18 Mm Thick , Providing M.S. Piano Hinges Isi Marked Is : 3818 Finished With Nickel Plating And Fixing With Necessary Screws Etc. Complete.Overall Width 35 Mm
