Tender For Provision Of New Otm Accommodation For Ors, Cook House And Dinning Hall For Asc Battalion At Secunderbad.; 1 Lumpsum price worked out by the tenderer for BUILDING STRUCTURE as listed in Schedule ‘A’ Part-I 2 Lumpsum price worked out by the tenderer of SITE CLEARANCE AND AREA DEVELOPMENT as listed in Schedule ‘A’ Part-II 3 Lumpsum price worked out by the tenderer fo INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III 4 Lumpsum price worked out by the tenderer fo INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV 5 Lumpsum price worked out by the tenderer for ROAD, PATH & CULVERT as listed in Schedule ‘A’ Part-V 6 Lumpsum price worked out by the tenderer forSEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI 7 Lumpsum price worked out by the tenderer forAREA DRAINAGEas listed in Schedule ‘A’ Part-VII 8 Lumpsum price worked out by the tenderer for RAIN WATER HARVESTINGas listed in Schedule ‘A’ Part-VIII 9 Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX 10 Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-X 11 Lumpsum price worked out by the tenderer for HOT WATER & SOLAR WATER HEATERas listed in Schedule ‘A’ Part-XI 12 Lumpsum price worked out by the tenderer for ELECTRIC CHIMENEY as listed in Schedule ‘A’ Part-XII 13 Lumpsum price worked out by the tenderer for COOLING APPLICANCES & AIR CONDITIONINGas listed in Schedule ‘A’ Part-XIII 14 Lumpsum price worked out by the tenderer for GARAGE BIN as listed in Schedule ‘A’ Part-XIV 15 SCHEDULE A PART XV (MISCELLANEOUS ITEMS)Note: This schedule is not pre-priced by MES 16 INTERNAL ELECTRIC SUPPLY 17 M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multi stranded copper conductor confirming to IS-694 1990 wih ISI marked (for phase, neutral and earth) in and including PVC conduit with ISI Mark of minimum 20mm dia and all conduit accessories concealed including cutting/ chases in wall/ceiling etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets, fan regulators etc. of suiable size modules and the earth wire to be connected to common earth dolly complete all as specified and directed forOne light point /Ceiling Fan Point /Exhaust fan Point controlled by one modular switch 6A one wayswitch. Note: Location of light points, 6 Amp socket points and light fittings may be decided by Engr-in-charge as per site/user requirment 18 All as per item No 15 here-in-before but One Light point controlled by 2 switches. 19 All as per item No 15 above but One 3 pin socket out let 6 A on same board 20 All as per item No 15 above but One 3 pin socket out let 6 A on Independent board 21 M&L for Point wiring complete all a specified with 1100 Volts grade 4 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS 694 1990 with ISI marked (for phase, neutral and earth)in and includingPVC conduit ISI Mark of minimum size 20mm dia all accessories concealed including cutting/ chases in wall/ceiling/fixed to roof/truss/columns etc and including factory made branded make embossed galvanised steel pressed terminal boxes for fixing modular sockets of suitable sizemodules and the earth wire to be connected to common earty dolly all as specified and as directed.all as specified and as directed for One three pin modular switch socket 16 amps outlet on independent board 22 S&F reading light (Bed Side) wall mounting5/7 W Cool day light CCT of 3000K 400Lumen output complete all as specified and directed make PhilipsCat No 31437 or equivalent in Havells or Wipro 23 INTERNAL WATER SUPPLY 24 S&F two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup 25 S&Ffor providing20mm dia CPVC gate valvesscrewed both ends for iron pipes 26 S&F for providing25mm dia CPVC gate valvesscrewed both ends for iron pipes 27 EXTERNAL WATER SUPPLY 28 M&L for Centrifugally cast (Spun) Ductile Iron pipes with socket & spigot end centrifugally, class K-7 conforming to IS: 8329:2000 markedwith and includingRubber Gaskets used with Push -on -jointingconfirming to IS 5382 in any length laid in trenches with including all fittings of size 100 mm dia bore all as specified. 29 Supply, install,test and commission of Centrifugal electrically driven self priming monoblock pump set with cast iron impeller capable of pumping 600 LPM at 39 Mtr head, squirrel cage TEFC induction motor3 phase, 415V AC,50 Hz suitable for delivery 600 LPM at 39 Mtr head coupled on common base chanel including necessary PCC foundarion works, nuts and bolts, copper cable from starter to motor through PVC flexible pipe , suitable size of suction pipe not less than 20 feet or as reqd at site, Foot valve, Air release valve complete all as directed and specified 30 Construction of valve chamber of size900 x 900 mm (Internal size) 900 mm deep with 200mm thick PCC block masonary walls built in CM 1:6 over 100 mm thick foundation concrete in PCC 1:4:8 type D2, (Using 40 mm graded coarse aggregate) with 100 mm off set, 15mm thick complete internal plaster and external plaster up to a depth of 15 cm below GL in CM (1:6), 3 mm thick MS sheet cover, double door welded to 50 mm x 50 mm x 6mm MS angle frame fixed with hold fasts in PCC 1:2:4 type B1 coping 50 mm thick in PCC (1:2:4) type B-1, 20mm x 6mm flat iron hinges with locking arrangement including lock sixty five mm, brassd and keys(Godrej/Shell), MS handles and applying two coats of synthetic eanmel paint over a coat of red oxide zinc chrome primer to all steel surfaces including excavation & earth work in any type of soil /soft disintegrated rock and disposal of surplus soil to a distance not exceeding 50 Mtr complete all as specified and directed 31 EXTERNAL ELECTRIC SUPPLY 32 Supply, Installation, test and Commissioning factoryfabricated, out door type, LT DISTRIBUTION PANELBOX made out of 3.15 mm thick CRCA Sheetwith projected Globe roof for rain water protection Dust and Vermin Proof,Double door withboth side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embededwith 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete withinternal connection with suitable size of cable ,cable lugs,and cable glandsBrick work Foundation of size 700x400x700 mm including Exccavation 900x600x400 mm over on Cement Concrete 1:3:6 (20mm Graded Stone Aggregate 100 mm thick of size 700x400 mm) and Test-ing after Installationcomplete all as specified and comprising of the following :– 33 (a) Aluminium bus bar 200 amps - 03 Nos, and busbar 100 amps for neutral - 1 Nos supported with suitable size of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b)I/C :MCCB TPN 415 Volts 50 HZ 100 - 125 Amps adjustable Thermal and Fixed Magnetic type with repturing capacity of 25 KA - 01 Nos. (c) O/G : MCCB TPN,63 Amp, 415 Volt, 16 KA Breaking Capacity Thermal magnetic release- 02 N0s. (SM Barrack, Cook House & Dinning Hall). (d) MCB TPN, 06-32 Amp, 240 Volt, 10 KA Breaking Capacity Thermal magnetic release - 2 nos.(Pump House & Street light) 34 (e) MCB SPN 6-32 Amp, 240 Volt - 2 Nos ( Parking shed & spare). (f) Voltmeter 0-500Volrt Digitalwith selector switch - 01 No (Make AE/L&T). (g) Ammeter 0 to 400 Amps amps Digital with CTs 125/5 Amps and selector switch - 01No Make(AE/L&T). (h) LED indicating lamps with holder for main supply indicating RYB - 01 set(03 Nos) Make AE/L&T. (j) Instrument fuse holder, fused4 amps - 03 Nos. (k)ASTRONOMICAL TIMER AND ML -2 Contactor - FOR STREET LIGHT - 01 set (Street light)( (k)ASTRONOMICAL TIMER AND ML -2 Contactor - FOR STREET LIGHT - 01 set (Street light) 35 Earthing with galvanised steel earth plate electrode 60 cm x 60 cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of earth plate not less than 1.5 metre below normal ground level connected to main earth lead GI strip 32 mmx6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part I 1991, GI earth lead protected by GI pipe 40 mm dia light grade, providing and connected to earth test point with & including necessary excavation & earth works in any type of soil, returning filling, disposal of surplus soil to 50 metre, filing with mixture of charcoal and common salt up to 15 cm above top edge of earth plate, pit of PCC 1:2:4 with precast cover of RCC 1:2:4, watering arrangement with GI funnel, 20 mm dia GI light grade watering pipe, earth test point terminal block, commissioning & testing complete. Note :Main earth lead beyond 7.5 metre measured and paid for separately.) 36 Earthing with galvanised steel earth plate electrode 60 cm x 60 cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of earth plate not less than 1.5 metre below normal ground level connected to main earth lead GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part I 1991, GI earth lead protected by GI pipe 15 mm dia light grade, providing and connected to earth test point with & including necessary excavation & earth works in any type of soil, returning filling, disposal of surplus soil to 50 metre, filing with mixture of charcoal and common salt up to 15 cm above top edge of earth plate, pit of PCC 1:2:4 with precast cover of RCC 1:2:4, watering arrangement with GI funnel, 20 mm dia GI light grade watering pipe, earth test point terminal block, commissioning & testing complete. ( Note :Main earth lead beyond 7.5 metre measured and paid for separately.) 37 S&F hot press moulded SMC junction/terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts, 32 AMPSmade out of polycarbonate or bakelite and 1 No MCB SP of 10 Amps with DIN bar with 2 Nos Aluminium bus bar of size 25 mmx3 mm thick shall be fixover on PVC insulators nuts boltswith insulation and made incoming/outgoing cable connectors with 10 mm dia holes 4 Nos in each bus bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs and pvc glands, fixed on pole by means of 2 SETS OF clamps made out of MS flat iron of size 25mm x 3 mm COMPLETE all as specified and as directed. 38 M&L for streetlight bracket made out of 40 mm dia GI pipe medium grade 1.2 mtr long complete with 2 sets of FI clamps made out of 40x5 MS flat & nuts, bolts & washer including painting to clamp two coat of aluminium silver paint over a coat of primer including of 3 core copper cable from junction box to street light complete all as specified and as directed. 39 M&L boring of holes under roadcrossing, pavement, hard standing by maual boringand necessary machine including HDPE pipe of 150 mm dia complete all as specified and as directed. 40 FIRE FIGHTING 41 S & F 6 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder, Operating temperature ranging from300°C to + 550°C,Discharge time not less than 45 sec , throw not less than 4 meters with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed 42 S & F of 4.5 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder, Test Pressure not less than 250 kgf / Sq. cm,Operating temperature ranging from 300°C to + 550°C with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed 43 Supply & Installation of Water Stored pressure type Fire Extinguisher of 9lit capacity,fitted with discharge control valve (Squeeze grip type) CEmarked and pressure gauge, with discharge hose and open nozzle and supplied complete with initial charge as per IS:15683 with ISI mark and wall bracket. Fire Rating 2A 44 ELECTRIC CHINMEY 45 M & L for MS -CRC 18 gauge square perforateddouble deflection aluminum suction grills of size 12 x 6 for fresh air intake by chimney all as specified and as directed. 46 M & L for 0.8 mm thick Stainless Steel 304 Hood with SS oil filters of size 7feet x 3 feet x 20 inches suitably mounted and connected to the ducts of the chimney all as specified and as directed. 47 M & L for 0.8 mm thick Stainless Steel 304 Hood with SS oil filters of size 5eet x 3 feet x 20 inches suitably mounted and connected to the ducts of the chimney all as specified and as directed. 48 M & L for 0.8 mm thick Stainless Steel 304 Hood with SS oil filters of size 3feet x 3 feet x 20 inches suitably mounted and connected to the ducts of the chimney all as specified and as directed. 49 M & L for 3HP, 3 -Phase centrifugal blower with driving shaft forbelt driven pressure blower comprising of inlet air filter, outlet air filter, belt guard, outlet silencer, coupling guard, vibration isolators abrasion resistant, high temperaturee welded steel wheel suitable to operte at low static pressure and high air flow not less than 3000 CFM at 1440RPM mounted on the exhaust duct including necessary wiring upto DOL starter of suitable capacity all as specified and as directed. 50 M & L for 1HP, 3 -Phase centrifugal blower with driving shaft forbelt driven pressure blower comprising of inlet air filter, outlet air filter, belt guard, outlet silencer, coupling gaurd, vibration isolators abrasion resistant, high temperaturee welded steel wheel suitable to operte at low static pressure and high air flow not less than 3000 CFM at 1440RPM mounted on the exhaust duct including necessary wiring upto DOL starter of suitable capacity all as specified and as directed. 51 S&F Refrigerator electrical driven Single door (single phase) capacity195 ltrsBEE 5 star rated suitable for operation on 230v 50HZ ACall as Specified and directed. 52 Supply and Fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for inputvoltage variation between 170 V to 250 V withoutput voltage stabilized 230V with accuracyof +/- 2.5% and of capacity 5 KVA complete all as specified and s directed.Make ; V-Guard VG 500 or equivalent 53 S&F install commisision and testing of Desert Cooler electrical driven (single phase) having nominal air flow capacity of 4000 cum per hour (or nearest size) PVC/Plastic body all as specified and directed.Make-Symphony, Bajaj or Equivalent. 54 M&L for applying thermoplastic road marking paint (reflective) of specified shade or colour, 2.5 mm thick not exceeding 10cm width with glass beeds 250 gm/sqm including layout of centre line, dashes, arrows, speed breakers, writting letters etc, using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispencer propane tank heater and profile shoe heater driven by experienced operator, on road surface made free of all dirt, scales oil grease, foreign materials etc complete all as specified and as directed.
