|
| 1 | M&Lfor Taking down cement plaster in any descriptionon brick or stone wall etc incl racking outjoints. hacking for key scrubbing down with water etc. all as specified andas directed by Engr-in-Charge. |
| 2 | M&L forapplying one coat of white wash to old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 3 | M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 4 | M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 5 | M&Lforapplying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 6 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 2 to 3 mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge. |
| 7 | M&L forapplying one coat of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 8 | M&L for applying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) painting shall be applied post curing , curing done shall be complete all as specified and directed by Engineer -in-Charge. |
| 9 | M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 10 | M&Lforapplying two coats of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 11 | M&Lforapplying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 12 | M&L forapplying two coats of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 13 | M&Lforapplying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 14 | Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of exterior emulsion paint weather coat, complete all as specified and as directed. |
| 15 | M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 16 | M&L for 5 mm thick rendering in cement mortar (1:3)to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 17 | M&L for rendering 15 mm thick cement plaster on fair face of brick work or concrete surface in CM (1:4) with water proofing compound mixed @ 3% by weight of cement complete all as specified and as directed.Note : W.P.C. shall be measured and paid separately. |
| 18 | Supply only integral water proofing compound all as specified and as directed. |
| 19 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surface complete. |
| 20 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied complete all as specified and directed by Engineer -in-Charge. |
| 21 | M&L for preparation of newly plastered wall surfaces and applying 3 mm thick on wall putty complete all as specified and directed by Engineer -in-Charge. |
| 22 | M&L for preparation of newly plastered wall surfaces and applying 3 mm thick on ceiling putty complete all as specified and directed by Engineer -in-Charge. |
| 23 | M&L for applying two coats of cement based paint to newly plastered surface of wall over a coat of primer including preparation complete all as specified and as directed. |
| 24 | M & L for writing letter/number upto 05 letters or figure (Block, Roman, Italic or Indian, stop, commas, shortline, dashes, hyphens, brackets etc) in Synthetic enamel paint not exc. 30 cm high on base paint of black colour of area exc 0.0625 Sqm but not exc 0.122 sqm at any heiht of building (up to G+2) complete. |
| 25 | Dismantling water tanks of any description exc. 250 ltrs and not exc. 500 ltrs capacity and removing from site. |
| 26 | Dismantling water tanks of any description exc. 500 ltrs and not exc. 1000 ltrs capacity and removing from site. |
| 27 | S&F of 500 ltr rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 28 | S&F of 1000 ltr rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 29 | M&L for cleaning ofbuilding service tanks PVC of OMQ & SMQ areaof exe. 250 litres and not exe. 500 litres capacity situated at various places by involving the following four (4) stages of cleaning process shall be carried out as given below :- a) De-watering PVCtankthrough wash out pipe completely. b) Total removal of sludges completely .c) Cleaning of walls, ceiling and floor & inspecting for craks if any completely.Contd..... |
| 30 | d) Antibacterial treatment of inside of tankto make itcomplete bacteria free.Note (i) Entire T&P shouldbe arranged by the contractor at their own.Only electric power & water shall be supplied by MES at stipulated rate. (ii) Date of cleaning, should be written over the outer surface of tank by synthetic enamel paint with lettering not less than 100 mm height.Cost of the same is deemed inclusive in the quoted unit rate of cleaning of tank. |
| 31 | All as per Serial Item No.29.00 here in above but capacity of tank exc. 500 litres and not exc. 1000 litres. |
| 32 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets, complete all as specified & directed. |
| 33 | M&L for Non asbestos fibre cement building boards 4-6mm in thickness fixed or laid/ inserted to timber/GI/Aluminium frame work with screws along with Anodised aluminium snap gridframe work for false ceiling Size of grid 605 x 605mm all as specified and directed. |
| 34 | Dismantling AC/CI sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges, complete all as specified & directed. |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of a colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified anddirected . |
| 36 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/valley gutter to wall, fixed with self tapping screws, complete,all as specified anddirected . |
| 37 | S&F in repairs Mirror cabinet (PTMT) with mirror size 350mm x 450mm fixed on wall with cadmium plated brass screws, complete all as specified & directed. |
| 38 | S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. |
| 39 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 40 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed. |
| 41 | S&F in repairs vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed. |
| 42 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified &directed. |
| 43 | S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 32mm (Minimum weight 45gms), complete all as specified & directed. |
| 44 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle, complete all as specified & directed. |
| 45 | S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete all as specified & directed. |
| 46 | S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms complete all as specified & directed. |
| 47 | S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 48 | S&F in repair pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm -110gms) |
| 49 | S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated,screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & directed. |
| 50 | S&F in repair for Brass chromium plated shower rose 125mm size with arm 15 mm bore complete all as specified and directed by Engineer-in-charge . |
| 51 | S & F 15/20mm bore ball/float valve brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete. |
| 52 | S & F 25mm bore ballbrass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete. |
| 53 | S&F in repairs PVC connection pipe 15mm dia 450/600mmm long as requiredwith 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 54 | S&F in repairs lid for polyethylele water storage tank exc. 250 litres and not exc.500 litres including fixing PTMT nut/binding wire complete all as specified and directed. |
| 55 | S&F in repairs lid for polyethylele water storage tank exc. 500 litres and not exc.1000 litres including fixing PTMT nut/binding wire complete all as specified and directed. |
| 56 | S&F in repair for. Swivel shower of PTMT with arm 15 mm size, 195mm long with bend of 45 degree with flange of any colour.(Minimum weight 40gms) complete. |
| 57 | S&F in repair 32mm dia PVC waste pipe for WHB & kitchen sink 80cm long with union complete all as specified and directed. |
| 58 | S&F in repairwaste coupling brass chromium plated 100mm dia for kitchen sink complete all as specified and directed. |
| 59 | S&F in repairs cpdecorativecurtain rail, 20mm bore including bracketscomplete all as specified & directed. |
| 60 | S&F in repairs in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long |
| 61 | S&F in repairs Toilet paper holder, vitreous china box type complete all as specified & directed |
| 62 | S & F in repairs hand shower (health faucet) ABS body mild steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified. |
| 63 | S&F in repairs 15mm dia of fancy type chromium plated Anglestop valves one way /two way angle cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & directed. |
| 65 | M&L for glazed ceramic tiles (coloured) of size350mm x 250mmx6-7mm /450x 350x6 to 7mm thick on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar (1:4),complete all as specified anddirected. |
| 66 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified & directed. |
| 67 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4), complete all as specified & directed. |
| 68 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular)area of eachtile exceeding 0.06 sqm but notexceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified anddirected. |
| 69 | Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site. |
| 70 | Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site. |
| 71 | Supplying and laying of 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 72 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 73 | S &F of Brass Elbow 16/20 mm bore complete all as specified |
| 74 | S &F of Brass Elbow (3/4 X ½) 20 mm bore complete all as specified |
| 75 | S &F of Brass Tee 16/20 mm bore complete all as specified |
| 76 | S &F of 16/20 mm bore Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified |
| 77 | S &F of 16/20 mm bore Female Brass Threaded Adaptor(FTA/ FBTA)complete all as specified |
| 78 | S &F in repairs of 15/ 20/25 mm boregate valve complete all as specified |
| 79 | S&F in repair for stainless steel plate rack for kitchen utensil made out of 0.50 mm thick stainless sheeet and over all size 600x750mm and 250 mm depth fixed to wall with screws complete all as specified and as directed. |
| 80 | S & F in repairssquatting pan vitreous china orrisa pattern of Size 580mmx440mm \"white\" with integral foot rest (Excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe etc complete making good to floor complete all as specified and directed. |
| 81 | S&F in repairs in repairs Grating doom 100-150mm dia with waste hole or without hole of PTMT and CP complete all as specified & directed (Minimum weight 40 gm) |
| 82 | Demolition of Concrete of any description and in anyposition any depth not otherwise specifically provided for complete all as specified and directed |
| 83 | M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and evencomplete all as specified and as directed. |
| 84 | M&L for Prepolished chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx20 to 22mm thick set & jointedwith cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6)and pointed with grey cement complete all as specified and as directed by Engineer-in-Charge. |
| 85 | M & L for rendring 15mm thick cement plaster with in cement sand mortar (1:3)on brick/ concrete surfaceover two coat of two component of cementitious and flexible acrylic coating of Tapecrete RTU / Piddifin 2k or equivalent over the cleane and moist surface in opposite direction to form a seamless layer two make the surface water resistance coating as per manufacturer instruction as in sunken slab complete all as specified and as directed by Engr-In-Charge. |
| 86 | M & L for cleaning to concrete/plastered surfacesof sunken slab and applying water proofing treatment in the following courses :(a) Applying bitumen primer @ 0.80 kg/sqm. (b)Applying a tack coat of bitumen 85/25 cofirming to IS-702 @ 1.20kg/sqm. (c)Supplying & laying 150 micron thick polyethylene film of Superior quality. (d)Applying a tack of bitumen 85/25 @ 1.20kg/sqm over polythene film incl GI spout pipe of size of 40mm dia and 250 mm long fixed in desired positioncomplete all as specified and as directed by Engineer –in- charge. |
| 87 | M & L for cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in filling sunken floor, surface finished even and fair without using extra cement complete all as specified andas directed by the Engineer-in-Charge. |
| 88 | Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. |
| 89 | S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floorcomplete all as specified and directed by Engineer-in Charge. |
| 90 | S & F in repairs 110 mm dia PVC (SWR) bends any radius, with access door complete all as specified and directed by Engineer-in Charge. |
| 91 | S & F in repairs 110 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge. |
| 92 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, withoutaccess doorcomplete all as specified and directed by Engr-in-charge. |
| 93 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, withaccess doorcomplete all as specified and directed by Engr-in-charge. |
| 94 | Taking down floor trap/ nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1 1:2:4 with water proofing compound complete all as specified and directed. |
| 95 | M & L for 75mm outlet dia PVC (SWR)floor trap, plainwith grating including jointing with solvent cementall as specified and directed. |
| 96 | S&F of 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floorcomplete all as specified and directed by Engineer-in Charge. |
| 97 | S & F in repairs 75 mm dia PVC (SWR) bends any radius, with access door complete all as specified and directed by Engineer-in Charge. |
| 98 | S & F in repairs 75 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge. |
| 99 | M & L for reparing of RCC projection chajja, roof, roof facia, celing by scrapping, cutting derusting and cleaning exposed reinforcement surface of damaged loose RCC surface and applying neat cement slurry @3 Kg/Sqm and filling the surface with cement plaster 1:3 one or two layers as reqd or PCC 1:2:4 as directed by engr in charge with or without facia and smooth finished and smooth edges incl two coats of finished to mathch with the existing surface at any height and any height and in any situation including necessary form work complete all as specified. |
| 100 | Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified anddirected. |
| 101 | Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each completeall as specified anddirected. |
| 102 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. |
| 103 | All as per Serial Item No 101.00 here-in-above but exceeding 1.5 Square Metre and not exceeding 4.00 Square Metre each complete all as specified and directed. |
| 104 | Taking down aluminiumwindowframe with shutters (Without taking off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 105 | Taking down aluminiumdoor frame with shutters (Without taking off shutters from frame) exc 1.5 Sqmnot exceeding 4.00 sqm eachcompleteall as specified and directed. |
| 106 | Demolition of brick work or stone / boulder masonary built in CM including all quoins, arches, pillars, etc but excludingashlar, facing, dressedstone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge |
| 107 | M&Lfor Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified anddirected. |
| 108 | M&Lfor PCC (1:2:4),type B1 using 20 mm graded crushedstone aggregate as inhold fast, bed plate etc including necessary form work complete all as specified anddirected. |
| 109 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge |
| 110 | S&F Framed work of mild steel as in grills, grating with guard bars etc ends of bars shouldered or riveted or forged into spike conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed |
| 111 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conformingto Fe-290-0 or Gde E-165 complete all as specified and as directed by Engineer-in-Charge |
| 112 | Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge |
| 113 | S&Ffor 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified anddirected. |
| 114 | S&F Glazed and skelton shutters, 30-35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters asspecified in SSR Part-I, Section 8, clause 8.24(a), chemically treated complete all as specified anddirected. |
| 115 | All as per Serial item No. 113.00 here-in-before but 30 mm thickas inwindow and ventilatoretc are provided with stiles and rails, sash bar all as specified in SSR Part I, section 8, clause 8.24 (b), chemically treated, complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F aluminium anodised powder coated frame of standard section as directed or as per TD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat,etc for fixing etc. complete all as specified & as directed. |
| 117 | S&F aluminium anodised powder coated door shutters, with top rail of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc.complete all as specified & directed. Note : all the aluminium shutterwill be as per TD drg no:- AF/TD/242/15shet no 1/3,2/3,3/3 of CE(AF) shillong Zone. |
| 118 | S&F aluminium anodised powder coated window and ventilator shutters, sliding type with size of sliding shutter style39mm x 20mm, top rail size 39mm x 20mm and bottom rail size 41mm x 20mm,joining cleats, glazing clips, rubber packing/ rubber gaskets, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1no.) hinge type B-21 100mm long (2 no.) complete all as specified & directed. Note: all the aluminium sliding window shutterwill be as per TD drg no:- AF/TD/242/15 (R) shet no 1/6,2/6,3/6,4/6,5/6,6/6 of CE(AF) shillong Zone. |
| 119 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 120 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified anddirected. |
| 121 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified anddirected. |
| 122 | S&F 200 mm long mild steel barreltower bolt, stove enameled black with bright bolt complete all as specified anddirected. |
| 123 | S&F 100/150 mm long as required mild steel barreltower bolt, stove enameled black with bright bolt complete all as specified anddirected. |
| 124 | S&FMild steel pressed handle, oval type, stove enameled black, 150 mm size complete all as specified and as directed. |
| 125 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedlength of bolt 250 mmcomplete all as specified and as directed. |
| 126 | S&F 4 mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqmin each pane complete all asspecified and as directed by Engineer-in-Charge. |
| 127 | S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads/ aluminium frame, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and includingsolar control film 25 micron reflective type(greatersun control or equivalent) complete all as specified and directed. |
| 128 | S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqmin each pane complete all asspecified and as directed by Engineer-in-Charge. |
| 129 | S&F 3mm thick obscured or frosted sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n. exc 0.5 Sqmin each pane complete all asspecified and as directed by Engineer-in-Charge. |
| 130 | Easing of wooden door/windows wooden/iron including replacement including changing of hinges tower bolt handle if required including taking down carefully of door shutter for replacing unserviceable parts/ components by new parts / components for smooth functioning of door/windows and refixing the same in existing opening/ positioncomplete all as specified and directed. |
| 131 | Easing of aluminium door/windows including replacement including changing of hinges tower bolt handle if required including taking down carefully of door shutter for replacing unserviceable parts/ components by new parts / components for smooth functioning of door/windows and refixing the same in existing opening/ position complete all as specified and directed. |
| 132 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking downand refixing of shutter as in repairscomplete all as specified anddirected. |
| 133 | S&F in repairs aluminium bodyhydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified anddirected. |
| 134 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified anddirected. |
| 135 | S&F solid PVC door frame of size50mm x 47mm made out of 5 mm wood grain printedPVC sheetreinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 136 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. |
| 137 | M & L in repairs 75 mm outlet dia PVC (SWR) branch piece,single /double( Y) equal or unequalcomplete, all as specified & directed. |
| 138 | M & L in repairs 110 mm outlet dia PVC(SWR) branch piece,single /double (Y) equal or unequalcomplete, all as specified & directed. |
| 139 | S&F in repairs Door bottom seal brush with metal frame with nylon brush/ rubber with height upto 30-40mm fixed with screws to any type of doors (wooden/alumium/PVC) including necessary fittings complete all as specified and directed. |
| 140 | M& L forForming Construction joint 30mm deep x10mm wide filled with Grade \"B\" sealing compound complete all as specified and directed. |
| 141 | M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as inplinth protection,surface finished fair and even,laid to slope of 1:30 in alternative bays not exceeding 3 meter in length, complete all as specified and directed. |
| 142 | S&F in reapiar Sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460 mm bowl size 410 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B0 including taking down old unserviceable sink complete all as specified and directed. |
| 143 | S&F in repairs CPbottle trap with internal portion 32mm size with 190mm long walll conection pipe complete all as specified and directed. |
