|
| 1 | Demolition of brick work or stone boulder masonry built in cement mortarcomplete all as specified and directed. |
| 2 | M&L for brickwork with subclass \"B\" Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed by Engineer-in-charge. |
| 3 | M&L for brickwork with subclass \"B\" Bricks, straight or curved on plan on any radius in half brick thick walls built in CM 1:6 complete all as specified & directed by Engineer-in-charge. |
| 4 | M&L for Preparingplastered or unplastered olddecorated surfaces of walls and applying one coat of white wash on walls |
| 5 | M&L for Preparingplastered orunplastered olddecorated surfaces of walls and applying one coat of white wash on ceiling |
| 6 | M&L for Preparingplastered orunplastered olddecorated surfaces of walls and applying one coat of cement based paint on walls |
| 7 | M&L for preparation of old plastered surfacesofwalls/ concrete surfacesand applying one coats of distemper oil emulsion asper manufactured instructionswith brush rollers complete all as specified and directed by Engr-in-charge. Note : Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 8 | M&Lfor preparation of old paintedsteel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint over of priming red oxide onsteel surface surfaces complete all as specifed |
| 9 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paintover of pink primer complete all as specifed . |
| 10 | Taking down cement plasteron brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. |
| 11 | M&L for rendering 15mm thick in Cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement. |
| 12 | M & L 15mm thick for rendering in patches onbrick work or Concrete surface in two coats 10mm thick in CM (1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with integral water proofing compound in finishing coat only with integral waterproofing compound @ 2% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compund shall be measured and paid seperately. |
| 13 | M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth complete all as specified and directed by Engineer-in-charge. |
| 14 | Supply only integral water poofing compound (PIDIPROOF LW) |
| 15 | M&L for Preparing newlyplasteredsurfacesof walls and applying two coats ofcement based paint onwalls over a coat of primer |
| 16 | M&L for complete removal of existing treatement and preparation of oldplastered/concrete surfaces of walls/roof/ incl necessary scafolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds, moss & efflorescent salts and applying two coats of Distemper Oil emulsion over and including one coat of alkali resistant primer, complete all as specified and as directed by engr-in-charge.Note : Primer shall be applied after complete removal to existing treatment from old painted plastered/concrete surface. |
| 17 | M&L for preparation of newly plastered surfacesofwalls/concrete surfacesand applying two coats of distemper oil emulsion over one coat ofAlkali resistant primer as per manufactured instructions with brush rollers complete all as specified and directed by Engr-in-charge. |
| 18 | M&L for complete removal of oldsteel or Iron surfaceof any description byrubbing surface by paint scrapper (manual / mechanical mean), over 10cm in width or girth , not otherwise and upto 15.0m of height (for blast pan painting or similar height bldg) and applying two coats of PU paint (polyurethene paint) over a coat of Zinc chromate primer as per manufacturer instructions complete all as specified and directed. Note : Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 19 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 20 | Providing and applying plaster of paris putty of1mm thickness over plastered surface to prepare the surface even and smooth |
| 21 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeing 0.06 sqm but not exceeding 0.11 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed |
| 23 | M&L Glazed ceramic coloured tiles in verticle surface of size 350x250x7 / 450x300x7mm thick including 10 mm thick rendering in CM (1:4)Overand jointed in neat cement slurry and pointed in white or coloured cement to match complete. All as specified and directed. |
| 24 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified & directed. |
| 25 | Hacking out old broken glass (any thickness, size, quality or description) form wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 26 | S&F in repairs 3mm thick sheet glass , figured glass , pin head type, glazing with oil putty area not exc 0.5 sqm each pane complete all asspecified and as directed by Engr in charge. |
| 27 | M&L for cleaning of building service tanks PVC ofexc 250ltr capacity and not exc 500 ltr capacity situated at various places by dewatering PVC tank through wash out pipe completely and total removal of sludges, Cleaning of walls , ceiling and floor completely.Antibacterial treatment of inside of tank to make it complete bacteria free .Note : (1)T&P should be arranged by the contractor at thier own. Only electirc power and water shall be supplied by MES at situpualted rates. (2)Date of cleaning should be written over the outer surface of tank by synthetic enamel paint with lettering not less than 100mm height of the same is deemed inclusive in the quated rate of cleaing of tank. |
| 28 | All as perserial Item no 27.00 here in above but capacity of tank exc 500 ltrs and not exc. 1000 ltrs complete all as specified and directed by Engr-in-charge. |
| 29 | All as per serial Item no27.00 here in above but capacity of tank exc 1000 ltrs and not exc. 2000 ltrs complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for writing letters or figures (Block letters/ Roman/ Italic/ Indian) 15 cm high complete in white or any other colour with synthetic enamel paint over a diamond shaped black painted surface of 25 cm size of each side in external walls of Bldg. (Cost of two coats of black painting in back ground of white letter is included in the cost of lettering) complete all as specified and directed by Engr-in-charge. |
| 31 | M&L for repairs of cracks in plastered surfaceby involving following stages as given below:- (a) Firstly pressing gently over the wall craks to see if the plaster moves or comes apart.(b) Clean the area and widen the crack using a putty knife. (c) Spread ready mixed or setting type joint compound(two coats or more of two component cementitious and flexible acrylic coating of tapecrete RTU/ Piddifin 2K or equivalent). (d) Considering the size of the crack if large, a self adhesive fibre glass mesh tape must be applied before plaster. (e) Applya few layers pf compound (two or three or as many as per site requirement) over the taped area. |
| 32 | M&L forcomplete removal of existing treatment and preparation of plastered/concrete surfaces of walls/roof/floor incl necessary scafolding by brooming down. Steel wire brushing, scraping down, smoke soot, mould, moss & efforesecent salts and applying two coats of weather proof Acrylic emulsion paint (exterior grade) in camouflage pattern as aprroved by Engr-in-charge / GE over and including one coat of primer complete all as specified and directed by Engr-in-Charge.Note : Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. Make : Asianpaint(Apex ultima)/ Berger Paint(weather coat/ Shalimar paints ltd(Extra maximum Ultra/ Royal Acrylic (Crimson paints Pvt Ltd) |
| 33 | Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified anddirected. |
| 34 | Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each completeall as specified anddirected. |
| 35 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each, removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. |
| 36 | All as per Serial Item No 35.00 here-in-above but exceeding 1.5 Square Metre and not exceeding 4 Square Metre each completeall as specified and directed. |
| 37 | Taking down aluminium windowframe with shutters (Without taking off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 38 | Taking down aluminiumdoor frame with shutters (Without taking off shutters from frame) exc 1.5 Sqmnot exceeding 4.00 sqm eachcompleteall as specified and directed. |
| 39 | M&L for PCC (1:2:4),type B1 using 20 mm graded crushedstone aggregate as inhold fast, bed plate etc including necessary form work complete all as specified anddirected. |
| 40 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge |
| 41 | S&F Framed work of mild steel as in grills, grating with guard bars etc ends of bars shouldered or riveted or forged into spike conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed |
| 42 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conformingto Fe-290-0 or Gde E-165 complete all as specified and as directed by Engineer-in-Charge |
| 43 | Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge |
| 44 | S&Ffor 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified anddirected. |
| 45 | S&F aluminium anodised powder coated frame of standard section as directed or as perTD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat,etc for fixing etc. complete all as specified & as directed. |
| 46 | S&F aluminium anodised powder coated door shutters, with top rail of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc.complete all as specified & directed. Note : all the aluminium shutterwill be as per TD drg no:- AF/TD/242/15shet no 1/3,2/3,3/3 of CE(AF) shillong Zone. |
| 47 | S&F aluminium anodised powder coated window and ventilator shutters, sliding type with size of sliding shutter style39mm x 20mm, top rail size 39mm x 20mm and bottom rail size 41mm x 20mm, joining cleats, glazing clips, rubber packing/ rubber gaskets, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) complete all as specified & directed. Note: all the aluminium sliding window shutterwill be as per TD drg no:- AF/TD/242/15 (R) shet no 1/6,2/6,3/6,4/6,5/6,6/6 of CE(AF) shillong Zone. |
| 48 | S&F Glazed and skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters asspecified in SSR Part-I, Section 8, clause 8.24(a), chemically treated complete all as specified anddirected. |
| 49 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completeall as specified and directed. |
| 50 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified anddirected. |
| 51 | S&F 200 mm long mild steel barreltower bolt, stove enameled black with bright bolt complete all as specified anddirected. |
| 52 | S&FMild steel pressed handle, oval type, stove enameled black, 150 mm size complete all as specified and as directed. |
| 53 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedlength of bolt 250 mmcomplete all as specified and as directed. |
| 54 | S&F 4 mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqmin each pane complete all asspecified and as directed by Engineer-in-Charge. |
| 55 | S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and includingsolar control film 25 micron reflective type(greatersun control or equivalent) complete all as specified and directed. |
| 56 | S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqmin each pane complete all asspecified and as directed by Engineer-in-Charge. |
| 57 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking downand refixing of shutter as in repairscomplete all as specified anddirected. |
| 58 | S&F in repairs aluminium bodyhydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified anddirected. |
| 59 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified anddirected. |
| 60 | M&L for 50 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection,surface finished fair and even, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length complete, all as specified and directed. |
| 61 | S&F solid PVC door frame of size50mm x 47mm made out of 5 mm wood grain printedPVC sheetreinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 62 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. |
| 63 | S&F in repairs mild steel decorative and colour coated curtain rail, 20mm bore complete all as specified & directed. |
| 64 | S&F Brackets decorative and colour coated suitable for 20mm bore complete all as specified & directed. |
| 65 | S&F in repairs in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long |
| 66 | S&F in repairs Mirror cabinet (PTMT) with mirror size 350 mm x 450mm fixed on wall with cadmium plated brass screws, complete all as specified & directed. |
| 67 | S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed.Make : Cera Cat No. 101 or Equivalent make as per list of make attached in Particular specification. |
| 68 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed. |
| 69 | S&F in repairs vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed. |
| 70 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device,complete all as specified &directed. |
| 71 | S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/ Sink, bore dia of discharge pipe 32mm (Minimum weight 45gms), complete all as specified & directed. |
| 72 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle, complete all as specified & directed. |
| 73 | S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete all as specified & directed. |
| 74 | S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 75 | S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated,screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & directed. |
| 76 | S&F in repair for Brass chromium plated shower rose 125mm size with arm 15 mm bore complete all as specified and directed by Engineer-in-charge . |
| 77 | S&F in repairs Toilet paper holder, viterous china box type complete all as specified & directed |
| 78 | S&F Rubber beading suitable for fixing at bottom side of the door shutter to avoid the entry of insects fixed with scres or nails with adhesive complete all as specified |
| 79 | S&F 18mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work |
| 80 | S & F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed. |
| 81 | S & F in repair of Harrison rails, anodised aluminium alloy with fixing brackets,stops, rollers etc. allas directed by Engr-in charge. |
| 82 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm all as specified and as directed. |
| 83 | S & F in repairs hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified. |
| 84 | Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 85 | S&F in repairs 15mm dia of fancy type chromium plated Anglestop valves, 2 way angle cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed. |
| 86 | Dismantling water tanks of any description exc. 250 ltrs and not exc. 500 ltrs capacity and removing from site. |
| 87 | Dismantling water tanks of any description exc. 500 ltrs and not exc. 1000 ltrs capacity and removing from site. |
| 88 | S&F of 500 ltr rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 89 | S&F of 1000 ltr rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 90 | Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site. |
| 91 | Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removing from site. |
| 92 | Supplying and laying of 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 93 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 94 | S &F of Brass Elbow 16/20 mm bore complete all as specified |
| 95 | S &F of Brass Elbow (3/4 X ½) 20 mm bore complete all as specified |
| 96 | S &F of Brass Tee 16/20 mm bore complete all as specified |
| 97 | S &F of 16/20 mm bore Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified |
| 98 | S &F of 16/20 mm bore Female Brass Threaded Adaptor(FTA/ FBTA) complete all as specified |
| 99 | M&L for forming construction joint 30mm deep x 10mm wide filled with Grade \"B\" sealing compound |
| 100 | S &F of 20 mm bore BALL VALVE / gate valve complete all as specified |
