Electrical work to be carried out in resident Qtrs no. B1/1, B1/2, B1/3, B1/4, B1/5, B1/6, B1/7, B1/8, B1/9, B1/10and B-2/1, B-2/2, B-2/3, B-2/4, B-2/5, B-2/6, B-2/7, B-2/8, B-2/9, B-2/10 and other misc. work at Dhakaomplex,University of Delhi.; 1 S/F the following size/modules G.I box along with modular base and cover plate for modular switches in recess etc as reqd. 2 1 or 2 Module 3 3 Module 4 4 Module 5 6 Module 6 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 7 1 x 1.5 sq.mm 8 2 x 2.5 sq.mm 9 2 x 4 sq.mm 10 2 x 6 sq.mm 11 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group B 12 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 13 5/6 amps switch 14 3 pin 5/6 amps socket outlet 15 15 /16 amps switch 16 6 pin 15/16 amp socket outlet 17 Bell Push 18 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB C curve including connections, painting etc. as required. 19 Supplying and fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 20 S/F of suitable size G.I. box with modular plate and cover in front or surface in recess including providing and fixing 6 pin 5/6 & 15/16A modular socket outlet and 15/16A modular switch, connection etc. 21 S/F of brass batten/holder including connections etc as reqd 22 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 23 Supplying and fixing of following sizes of Heavy Duty class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 24 25 mm 25 20 mm 26 Supplying and fixing following waysingle pole and neutral sheet steel of MCB distribution board of 240 volts on surface/ recess completetinned copper bus bar, neutral link, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 12 way, Double door 27 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 28 Supplying and fixing63 amps, double pole, 240 volts, DP MCB in the existingt MCB DB complete with connections, testing and commissioning etc. as required. 29 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 30 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 31 Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of Insulation: B, 3 Nos. Blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power Factor not less than 0.9, service Value (CMM/W) minimum 6.85, Air Delivery minimum 215 CMM, 350 RPM (Tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temprature rise= 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230V, 50 Hz, single phase AC supply, earthing etc. complete as required.(Make Atomberg/Crompton)
