|
| 1 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified bymanufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 3 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. completeat all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebrablack marbleArea of slab over 0.50 sqm |
| 4 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | 12mm plaster on fair side of brick/concrete work in 1:6 mix incl c/o frame work anf incl. of all carriages complete. |
| 7 | Providing and Fixing of wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fasteners shall be paid for separately), using K.D wood (Non-local), including all carriages leads & lifts upto site of work. Complete in all respects. |
| 8 | Providing and Fixing of 35mm thick doors/windows shutters using K.D wood (Non-local) excluding cost of necessary paneling which shall be paid for seperately but including all carriages leads & lifts upto site of work. Complete in all respects including hinges |
| 9 | Providing and Fixing of 35mm thick doors/windows wire guaze shutters using K.D wood (Non-local) excluding cost of necessary paneling which shall be paid for seperately but including all carriages leads & lifts upto site of work. Complete in all respects including hinge |
| 10 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 11 | Taking out doors, windows and clerestory window shutters (steel or wood)including stacking within 50 metres lead :Of area beyond 3 sq. metres |
| 12 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All works upto plinth level 1:4:8 ( 1cement: 4Coarse sand: 8 graded stone agg. 40mm nominal size) crusshed incl. of all carriages complete. |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5sq.meters and under, including cutting the patch in proper shape, rakingout joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as perdirection of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 159.94 |
| 16 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed withneat cement slurry mixed with pigment to match the shade of tiles, including rubbing andcleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 18 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-chargePre-laminated particle board with decorative lamination onboth sides |
| 19 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 20 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 21 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes andfittings. |
| 22 | P/F of geyser of 50 ltrs capcity white color of approved brandcomplete with all necessary geyser bolts/fire bolts complete in all respects as per the directions of Engineer Incharge |
| 23 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallswherever required :Kitchen sink with drain board 510x1040 mm bowl depth 200 mm |
| 24 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore |
| 25 | Providing and fixing 100 mm PVC pipeSSgrating (anti cockroach type) for gully trap. |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mmwide and effective height of 88 mm, weighing not less than170 gms |
| 28 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 29 | Providing and fixing pvc connections for wash basin, geyser, flush tank with all necessary fittings. Complete job |
| 30 | P/F of C P Brass basin mixer/sink mixer 15mm dia of approved brand, quality. Complete |
| 31 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mmhigh and 112 mm distance from wall of standard shape with bracket of thesame materials with snap fittings of approved quality and colour, weighingnot less than 105 gms. |
| 32 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings and fixingthe pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc .PN - 16 Pipe, 25 mm OD (SDR-7.4) |
| 33 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded,having thermal stability for hot & cold water supply, including all PP - Rplain & brass threaded polypropylene random fittings, including trenching,refilling & testing of joints complete as per direction of Engineer-in-Charge.External work PN - 16 Pipe, 32 mm OD (SDR-7.4) |
| 34 | Construction of soakage pit by way of providing & fixing pre cast reinforced cement concrete rings of 900mm internal dia of Specified thickness with top RCC cover including handling hoistiong fixing in position & jointing with 10mm thick cement mortar 1:6 upto required depth incl cost of necessary excavation as per the requirement & disposal of excavated soil as directed. Complete Job |
| 35 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with PVC cover , inside & outside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (Size 45x30x60 cm) |
| 36 | Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping, sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. |
| 37 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and Smooth complete. |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 39 | Distempering with 1st quality acrylic distemper, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour. One coat |
