Tender For Repair / Maintenance To Joinery Work, Sunken Floor, Roofs, Cleaning Water Tanks 0N Roof, Stairs, Sanitary Items And Other Misc Works At Af Basant Nagar/ Pinto Park Under Age B/R-Ii At Ge (Af) Palam Delhi Cantt-10; 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed. 2 Demolition of concrete in ground floor and pavings n.exc 15 cm thickness below or above ground level complete all as specified and directed. 3 Roughening surfaces of old concrete /terrazzo floor by picking, sweeping clean andwashing down with water to removedust, etc. complete all as specifiedand as directed. 4 M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular)area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 5 Description all as per item 4.00 above but as in skirtings laid over and including 10mm thick plaster in CM (1:4) complete all as specifiedand as directed. 6 M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular)area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 7 M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x7mm thick/ (450x300)mm x7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed. 8 M&L for coloured glazed ceramic tiles in vertical surfaces of size (600x300)mm x7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed. 9 M&L for digital glazed vitrified tiles, 10mm thick (squre or rectangular)area of each tile exceeding 0.36sqm, in floors etc. with using 5mm spacers and joint filled with epoxy grout, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 10 Description all as per item 9.00 above but as in skirtings laid over and including 10mm thick plaster in CM (1:4) complete all as specifiedand as directed. 11 M&L for 75 mm thick cement concrete (1:3:6) type C2, (using 40 mm gradedstone aggregate) as in hard standing/pavings/plinth protections, finished even and smooth without using extra cement,complete all as specified and as directed by Engineer-in-Charge. 12 M & L for machine pressed, glossy finished 25 mm thick coloured cement concrete chequered tiles of size 300mm x 300 mm of pattern as approved, set,jointed and pointed in neat cement slurry mixed with pigment in floorslaid over and including 15mm thick screed bed with cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. 13 M&L for Durastone vitrifiedtiles coloured, light shade 10 mm thick, area of each tile exc 0.06 butnot exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 14 Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey building complete all as specified and as directed. 15 Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specifiedand as directed. 16 M&L for brick work with sub class `B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specifiedand as directed. 17 M&L for brick work with sub class ‘B’ bricks, straight or curved on plan of any radius in half brick thick wall builtin cement mortar (1:4) complete all as specified and as directed. 18 Description all as per srl item no. 16 but except bricks complete all as specified and as directed. 19 Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including raking out joints, hacking for keys, scrubbing down with water complete all as specified and directed by theEngineer-In-Charge. 20 M&Lfor 10 mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, to befinishedeven and smooth without using extra cement complete all as specifiedand as directed. 21 M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), to befinishedeven and smooth without usingextra cement complete all as specified and as directed. 22 M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to befinishedeven and fair mix with water proofing compound by weight as per manufacturers instructions including necessaryscaffoldingup to (G+3) storey complete all as specifiedand as directed. 23 M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specifiedand as directed. 24 M&L for preparing oldsurfaces on ceilings including brooming down by mechanicaly, scraping down and applying two coats of white wash complete all as specifiedand as directed. 25 M& L for preparation of new plastersurface of walls, chajjas, soffits & beamincluding necessary scaffolding and applying 3 mm average thick cement base wall care putty and two coats of acrylic smooth exterior paint of required shade1.43ltr/10sqmover a coat of exterior primer 2.20kg/sqmall as per manufacturers instructions complete all as specifiedand as directed. 26 M&L for prepration of old decorated plastered surfaces of walls /ceilings, removal of nails etc & filling cracks/hole by applying cement base wall careputty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or coloured complete all as specified & directed by Engineer-in-Charge. 27 M&L for preparationold decorated surfaces of walls and cornices, spoiled bysmoke soot, moulds, moss and efflorescent salts and tradingoily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all asspecifiedand as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey building. Necessay scafolding upto fourstorey bldg shall be deemed to be included in unit rates. 28 M&L for preparationold decorated surfaces of walls and cornices, spoiled bysmoke soot, moulds, moss and efflorescent salts and tradingoily and greasy spots by scraping and washing with water and applying two coats of cement base paint complete all asspecifiedand as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey building. Necessay scafolding upto fourstorey bldg shall be deemed to be included in unit rates. 29 M&L for preparation of plastered or un plastered old decorated surfaces of wallsremoval of nails etc & filling cracks/hole by applying cement base wall careputty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of exterior emulsion paint 100% acrilic of approved white or colouredcomplete all as specified & directed by Engineer-in-Charge. Note:- The work shall be carried out upto four store. Necessay scafolding upto fourstory bldg shall be deemed to be included in unit rates. 30 M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 31 M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 32 M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 33 M&Lforpreparationofoldpaintedsurfacesofsteelandiron surfacesofany descriptionnototherwise described over10cm width&girth and applying onecoatof synthetic enamelpaint complete all asspecified and as directed. 34 Taking down shutters of any description area exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed. 35 Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc. 1.5 sqm each complete all as specified and directed.Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 36 Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.Note:- The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 37 Refixing of shuttersafter easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description area n. exc 1 sqm each in same opening complete all as specified and as directed. 38 Refixing of shuttersafter easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description area exc 1 sqm but n exc 2 sqm each in same opening complete all as specified and as directed. 39 S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etcwelding hold fast, hinges complete all as specified and as directed. 40 M&L for2nd class hard wood clean sawn timber framed and fixed in chowkats or frames scantlings complete allas specified and as directed by Engr-in-Charge. 41 S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC (1:3 :6) type C-0 (using 12.5 mm graded crush stone aggregate) for filling hollow portion of chowkhats complete all as specified and as directed. 42 S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC (1:3 :6) type C-0 (using 12.5 mm graded crush stone aggregate) for filling hollow portion of chowkhats, complete all as specified and as directed. 43 M&L in repair for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, grills, cladding and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and as directed. 44 M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) as for holdfasts, etc including necessary formwork, complete all as specified and as directed. 45 S&F factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded,edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauzeetc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); in second class hardwood, complete all as specified and as directed. 46 S&F 35mm thick factory made plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. 47 S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 48 S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as specified and directed. 49 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge. 50 S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with particle board core 2, 4, or 6 raised panel design with both side 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face &back face, supplying & fixing in frame at site as per specification & drawing. 51 S&Ffactory made 18 mm (+0.7mm thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company having one side perlaminated and other side plain fixed as in cabinet/ cupborad shutters including provding manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of existing shutter or any kind of PL board or plyboard complete all as specified and as directed. 52 S & F factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company fixed as in shelves perlaminated/ cabinet/cupboard drawers including provding manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of existing shelves or any kind of PL board or plyboard completed all as specified and directed. 53 S&F factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5 mm thick PVC sheet panelling for back side (wall side) and also manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of exiting back side (wall side)or any kind of PL board or plyboard complete all as specified and as directed. 54 S&F in repair 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screwsto timber frame-work as in Kitchen drawers, Cupboard shutters etc, complete all as specified and as directed by Engineer-in-Charge. 55 S&F 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge. 56 M&L for 18/19 mm thickpreleminated particle board, interior grade, prelaminated one sidewith decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework including 10 mm thick IInd class H.W leaping all round as in shelves of design as approved by Engineer in charge etc and including dismantling boardingany description fixed with screws complete all as specified and as directed by Engr-in-Charge. 57 M&L for Plywood 6mm thick (5 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed by Engineer-in-Charge. 58 M&L for Plywood 9mm thick (5 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed by Engineer-in-Charge. 59 M&L for Plywood 12mm thick (7 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed by Engineer-in-Charge. 60 M&L for powder coatedaluminium anodisedframe work as inpartition wall /Doors/windows/ ventilators/ sliding shutters by using suitable section conforming to IS-733 and IS-1285 and coating grade A-153 conforming to IS-1868 &fixed with rawl plug and screws or with fixing clips with expansion hold fasteners including necessary joining cleats, glazing clips, rubber packing, anodisedaluminium snap grid beading etc gap of junction at top and bottom and sides filled with PVC Neoprene felt including necessary provision of aluminium grills to windows/ventilators etc complete allas specified & directed by Engineer-in-Charge.. Note : a) Aluminium section shall be of non rusted and bright finish completely (internal & external side) . (b) Aluminium section shall be mechanically jointed wherever required.(c) Aluminium section size shall be approved by GE (d) Aluminium section snap gird, cleat, angle shall be screwed with chromium plates brass screw as directed by Engineer-in-charge. (e )The weight for all necessary fitting such as cleats, glazing clips, rubber packing, anodisedaluminium snap grid beading etc pvc item/raw plug material/bass screw etc which are required for fabricationshall not incuded in the weight of aluminium for the payment . The weight of aluminium section shall only be cosidered. No extra payment for fabrication matarial shall be paid. 61 S&Faluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified and as directed by Engineer-in-Charge.Note:-Minimum thickness of aluminium section shall be 2.5 mm and minimum thickness of anodizing shall be 15 microns. 62 S&Faluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised, handle 2 nos in each window aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.Note:-Minimum thickness of aluminium section shall be 2.5 mm and minimum thickness of anodizing shall be 15 microns. 63 S&F aluminum anodised grill DG-102 (10mmx5.2mm) of Decorative grill or equivalent fixed with F section size not less than 20.60mmx15.20mmx1.5mm thick of approved make complete all as specified and as directed. Note:- Minimum thickness of anodizing shall be 15 microns. 64 S&F powder coated anodised aluminium three track sliding type glazed window shutter with 5 mm thick plain sheet glass fixed open track section 100mmx38mmx1.5mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38mmx12mmx1.5mm and other standard sliding section including all necessary fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading etc complete all as specified and as directed. Note:-Cost of other consumables required for the item shall be deemed to be included in the quoted rate. The rate of Glass panes / Bakelite sheet /wire Cloth / Mortice lock /locking stay /floor spring / floor door stopper shall be measured and paid separately under respective items. 65 S&F 5.50mm thick,tinted sheet glass of any colour, selected qualityand fixed tosnab beading and gasket etc for aluminium door & window/ventilate complete all as specified and as directed. 66 Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations for aluminium frame work with including rubber beading or gasket for aluminium section complete all as specified and directed. 67 S&Fdoor closer hydraulically regulated designation No 3 universal typesuitable for door shutter of 851 to 1000 mm in width of aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed. 68 S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified and as directed. 69 S & F brass mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 70 S&F in replacement of steel window box type made of ERW hollow section of size 130mm x 65mm x 1.25mm thick double rebate comprises gauged and glazes sekelton shutter ERW Section 50mm x 20mm x 1mm thick double shutter with leaf and arrangments for cooler operning including iron grill bar with 12mm square complete welded to frame with vertical muilon of size 130mm x 65mm with 1.25mm thick ERW box typer including holes cutting holes for hold fast (04 Nos each window) and making good dismantled protion with PCC (1:2:4) type B-1 including following fittings welded to frame / shutter :- (a) Hold fast of 150mm long of flat iron 25mmx3mm made to shape-04 Nos each window. (b) MS Handle cold rolled of size 100mm long - 01 No per leaf (c) MS Tower bolt 100mm long- 02No per leaf(d) Z-section 20mmx25mm long stopper - 01No per leaf. (e) MS pintle hinges of size 40mmx25mm -2 Nos per leaf including one coat of red oxide shop primer complete all as specified and as directed. Note:- Wire mesh, sheet glass, painting etc shall be measured and paid separately under respective items. 71 S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. 72 S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed. 73 M&L for framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. 74 S&F window/Ventilator section of frame (72 x 55) mm fixed to wall or concrete surface with MS hold fast (30 mm x 5 mm section ) 150 mm long made of galvanized steel powder coated and section of shutter (47 x 20) mm, mullion section (72 x 50) mm (base steel as per IS 513 D quality galvanized as per IS 277 with zinc of 120 Gms/Sqm ) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60mm including powder coated grill/guard bars made of square bars 10mm dia at 150mm c/c horizontal spacing fixed in MS flat frame (30 mm x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed.Type - 4000 series ref Drg No CEAF/STD-191/2014 SH 1/2 & 2/2 75 S&F 30mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and as directed. 76 S & F 40 mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed. 77 S&F mild steel 300 mm size ordinary rat tail rod pattern springs including roller and roller plate , etc complete all as specified and as directed. 78 S&F brass door magice eye of following specification material:- resin lens + zinc alloy, top diameter:31.2 mm, Bottom diameter: approx 24mm, pipe diameter: approx16mm, total length:approx 50mm, inner hight :approx 36mm, application : 35 to 60mm thick, viewing angle 200*all round and clear view of 200* of surrounding without opening the door –unique design, ultra clear view and superior finish,wide angle, best in class lens for all round visibility, the outsider cannot hide anywhere, the back cover protects you from the outsider observirg any movements inside, easy to install with in-built screw over a wide range ofdoor thickness from 35mm to 60 mm etc required at site complete all as specified and as directed by Engineer-in-Charge 79 S&F Hasp & Staple, 125 size, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and as directed. 80 S&F in repair drapory rod 25mm dia fancy type mild steel plastic coated inculding wooden funnel and wooden brackets, complete all as specified and as directed. 81 S&F aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 82 S&F 150 mm long aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and as directed. 83 S&F aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed. 84 S&F 125mm long aluminium, anodised, handle of extruded section fabricated type complete all as specified and as directed. 85 S&F aluminium, anodised, barrel tower bolts 125mm size of extruded section, complete all as specified and directed. 86 S&F butt hinges, stainless steel, 100mm size, complete all as specified and as directed. 87 S&Fsheet glass 3mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section n exc 0.5 sq.m in each pane complete all as specified and as directed. 88 S&F stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifiedand as directed. 89 S&F figured glass or pin headed type 4mm thick area n exc 0.5 Sqm each and glazing with oil putty,complete all as specified and as directed. 90 S&F floor door stopper of aluminium alloy body 140mm cover plate and tounge, anodised with hard-drawn steel spring fixed in floor complete all as specified and as directed. 91 S&F auto closing hinges openable at 0 degree for cabinet shutters complete all as specified and as directed. Make :-Hettich, Ebco, Prime 92 S&F 50mm magnaetic catches with brass body and striking plate including letting in as fixed, complete all as specified and as directed. 93 S&F stainless steel telescope channel of size 500mm, complete all as specified and as directed. 94 S & F in repair mild steel mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 95 S&F in repair venetian blind vertical or horizontal consisting of head rail, vanes/louvers 1to 4 wide (as required) of approved tint and traverse cord fixed in position complete all as specified and as directed. 96 M&L for solid PVC wall lining consisting of 5mm thick supreme prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed. 97 M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed. 98 Dismantlingplain or corrugated steel sheeting any gauge, thickness, incuding Nainital or similar patternsheets in roofcoverings complete all as specified and as directed. 99 S&F mild steel work (FE 290 Grade E-165) roof trusses (framed), trussed, purlins, crane, gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc. complete all as specified and as directed. 100 S &FPre- paintedgalvalume aluminiumzinc coatingGI basedcorrugatedsteel sheet0.50 mmthickof anycolourhavingtensilestrengthof 550Mpa as in roof covering/cladding to fix the wall fixed with self taping screws with rubber washers etc complete all as specified and as directed.Note:-Pattern, design and colour shall be as approved by GE/ Engr-in-Charge. 101 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with rabber washercomplete all as specified and as directed. 102 Dismantling ceiling board, any size or description, fixed in any position or in any thickness, including cover fillets with nails complete as specified and as directed. 103 Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size (595x595)mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO .50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (Part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size (15x32) mm of length 3000mm, cross-T of size (15x32) mm of length 1200 mm and secondary intermediate cross -T of size (15x32) mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size (85x25x2) mm, galvanised iron perimeter wall angle of size (24x24x0.40)mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. 104 M&L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:-Stage 1:Cleaning of all foreign material such as fungus,mass, dust etc by brushing and dusting, sprinkle water on surface, surface shall be levelled with a layer of 20 mm thick CM (1:4) mixed with water proofing admixture WPC @3% by weight ofas per manufacturers insturctions.State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufacturers instructions.Stage 4:Laying fibre glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky.Stage 5:After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturers instructions.Stage 6:Providing 15mm thick protective plaster in CM (1:3) mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturers instructions.Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :- (i)Mode of measurement shall be actual area treated (floor and adjoining walls). 105 Demolition of cement concrete (unreinforced) in roof (tiling), tarfelt, stair case landing, floors (other than ground floor) including removal of rubbish out of MOD land complete all as specified and directed. 106 M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding to maintain slope etc complete all as specified and as directed. 107 M&L for preparationsurface includingcleaning of all dirt andproviding the following water proofing treatment in narrow widthover the roof gutter of stores housesor chajjah/canopy/parapet wall, below PVC/RCC water tanks etc of G+3 storied buildingaccessible / non accessibleRCCroof to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and as directed by Engineer-in-Charge:-(a) Cleaning of all foreign material such as fungus,mass, dust etc by brushing and dusting, sprinkle water on surface, surface shall be levelled with a layer of 20 mm thick CM (1:4) mixed with water proofing admixtureWPC @3% by weight ofas per manufacturers insturctions.(b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(c) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(d) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consistingof a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(e) Membrane bonded completely to the substrate & the over laps are then sealed/fused by flame and including two coats of water proofing bituminous aluminum paint on top of APP membrane complete all as specified and as directed. 108 M&L for cement concrete tiles 20cm x 20cm x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cut and polished on roofover and including 15 mm thick screed bed in CM (1:4) including material and labour for necessary scaffolding, safety arrangement and formwork upto G+3 storeys complete all as specified and as directed. 109 S&F in repairsvitreous china squatting pan, Orissapattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and directed. 110 S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” colouredwith WCseat cover coloured, closed pattern with flat bottom and mild steel chromium plated or aluminized hingingdevice including PVC flush pipe and joints etc and connection to drain, flushing, pipe, anti-syphonagepipe, and fixing arrangements with fixing bolts etc complete all as specified and directed. 111 S&F in repairs low level flushing cistern 10 ltrs capacity, and connections to pipes and fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, including brackets complete all as specified and directed. 112 M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and directed. 113 S&F in repair CP Soap dish complete all as specified and as directed. Make-AKP-35731P of Jaquar or equvelent in kohler. 114 S F in repair corner glass shelf with bracket complete all as specified and as directed. Make:- ACN-1173 of Jaquar or equvelent in kohler. 115 Takingupor down15 mm steeltubing and connections including cleaning for refixingor removal to store complete all as specified and as directed. 116 Takingupor down20mm steeltubing and connections includingcleaning for refixing or removal to store complete all as specified and as directed. 117 Material and Labour for 15mm bore, medium grade, GI tubingwith all fitting and fixed complete to walls and ceilings or laid in floors and cutting chase, pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubingcomplete all as specified and as directed. 118 Material and Labour for 20mm bore, medium grade, GI tubingwith all fitting and fixed complete to walls and ceilings or laid in floors and cutting chase, pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubingcomplete all as specified and as directed. 119 Refixing old 15 mm bore GI steel tubing and connectionsin new or old position (walls, ceiling, floors, etc), includingnecessary new fittings complete all as specified and as directed. Note:- Old serviceable GI pipe shall be retrieved from Ser item No. 115 here in before. 120 Refixing old 20 mm bore GI steel tubing and connectionsin new or old position (walls, ceiling, floors, etc), includingnecessary new fittings complete all as specified and as directed. Note:- Old serviceable GI pipe shall be retrieved from Ser item No. 116 here in before. 121 S&F in repairfor15 mm diastopvalvecast copperalloy screweddownhigh pressurewithcrutch orbutterfly handle fancy type screwedbothsidefor ironpipeoefor union complete all as specified and as directed. 122 S&F in repair pillar taps fancy type 15mm dia bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. 123 S&F in repair chromium plated long bodybib taps fancy time of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 124 S&F in repairof sink made out of stainless steel 1mm thick, drainage board kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915X460)mm bowl size (410X330X160) mm complete all as specified and as directed . 125 S&F in repairs, health faucet with double lock, one meter long brass chromium plated steel flexible hose pipe and wall hook complete all as specified and directed . 126 S&F in repairs 15 mm angle valve chromium plated with wall flangeand fancy typewithhigh pressure screwed down and with CP flange of same make complete all as specified and as directed. 127 S&F in repairs, PVC connections 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and as directed. 128 Dismantling water tank of capacity exc. 250 ltr and n. exc. 500 ltr and removing to store complete all as specified and as directed. 129 S&F 500 ltr cap rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. 130 Dismantling water tank of capacity exc. 500 ltr and n. exc. 1000 ltr and removing to store complete all as specified and as directed. 131 S&F 1000 ltr cap rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. 132 S&F ball valve 15mmhigh pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. (minimum weight-142 gms) 133 S&Fball valve 20mmhigh pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. (minimum weight-210 gms) 134 S&F in repairs (600 x450) mm fancy typeor bevelled edge mirror of selected quality glass, mounted on 6mm thick PVCbuilding board and fixed with PVC beadings with chromium plated brass screws and cup washers complete all as specified and as directed. 135 S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium platedwaste grating 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steelangle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete all as specified and as directed. 136 Taking down AC/PVC any type pipes of 75/100/110 mm diaof any description including all fittings complete all as specified and as directed. 137 S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and as directed. 138 S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and as directed. 139 S&F CI 100mm bends with door complete all as specified and as directed. 140 S&F CI 100mm single branch piece with door complete all as specified and as directed. 141 S&F CI 75mm single branch piece with door complete all as specified and as directed. 142 S&F75mm double branch piece with door complete all as specified and as directed. 143 S&F cast iron cowls 100 mm size complete all as specified and as directed. 144 S&F Cast Iron `P Trap 100mm bore complete all as specified and as directed. 145 S&F in repairs cast iron floor trap with CP grating including jointing to wastepipe withrun lead, dia of outlet pipe 100mm set in cement concrete type B1 (1:2:4) complete all as specified and as directed. 146 S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 147 Welding work upto 4th floor in repairs in any position or any thickness of metal and including cleaning and preparing the surfaces to be welded together and additional piece of metal, if required, holding the members in true position, welding and bevellign of edges as required also including taking down the article and refixing in same position after welding and grinding upto true level complete all as specified and as directed. 148 S&F 2nd class softwood plain fillets sectional area exc 13 sq cm and n. exc 25 sq cm square, rectangular or triangular in section, clean sawn, secured with nails or beads complete all as specified and as directed.
