Tender For Demolition And Re-Construction Of Perimeter Wall From Children Park To Bldg No P-35 At Af Stn Jaipur.; 1 Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dress stone work and precast concrete articles complete all as specified and directed. 2 Dismantling wrought iron or mild steel work of any descriptionnot otherwise provided for complete all as specified and directed. 3 Dismantling of barbed Wire fencing from steel members complete all as specified and directed. 4 Excavation in trenches. n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shaft wells, cesspits, manhole, pier etc n exc 10 sq m on plan and n exc. 1.5m in depth and getting out in hard dense soil complete all as specified and directed. 5 Excavation in trenches. n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shaft wells, cesspits, manhole, pier etc n exc 10 sq m on plan andexc. 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and directed. 6 M&L for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed. 7 M&L for TMT bar 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or secring with clips complete all as specified and directed. 8 All as per item No 7 here-in-before but 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders complete all as specified and directed 9 M&L for reinforcement cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in footing of columns, plinth beams, bases of columns etc complete all as specified. 10 M&L for reinforcement cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in columns complete all as specified and directed. 11 M&L for reinforcement cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and directed. 12 M&L for use and waste of form work, for sides of footings, columns bases, rafts and plinth beams complete for a rough finished surfaces all as specified. 13 M&L use and waste of form work to to sides of pillars posts, struts, piers, columns and stainchions, rough finished, complete all as specified 14 M&L use and waste of form work to sides and soffits floor and roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. 15 Material and labour for Brick work with sub class B bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:4, complete all as specified and directed. 16 M&L for rendering 10 mm thick, on fair faces of brick or concrete surfaces of wall, in CM 1:4, and finish even and fair without using extra cement complete all as specified and directed. 17 M&L for rendering 15 mm thick, on other than fair faces of brick or concrete surfaces of wall, in CM 1:4, and finish even and smooth without using extra cement complete all as specified and directed. 18 M&L preparation of surfaces of wall and applying two coats of cement base paint complete all as specified and directed. 19 Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm.Note: Cost of additional soil required for filling of trenches deemed to be included in this item. 20 Supply and fixing angle iron for fencing posts, struts etc, including cutting, welding and embeded in concrete complete all as specified and dircted. 21 Supply and fixing mild steel rag or lewis bolts, scewed one end with hexagonal or squrae nuts and washers the other end enlarged and jagged or lewised exc 20 cm and nexc 30 cm long, 16 mm dia, embeded in concrete etc complete all as specified and directed. 22 S&F Galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mils steel wire staples or steel pins etc complete all as specified and directed. 23 M&L preparation of steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide primer, exc 10 cm width or girth complete all as specified and directed. 24 S&F punched type concertina coil of dia of coil 450 mm (50 Nos rounds) each coil to be stretched to 6 mtr length secured and fixed in position having minimum tensile strength 1620 N/Sqmm of spacing steel core of wire size 2.60 mm make of concertina coil shall be as approved by GE/AGE (I) all as specified and directed. 25 M&L for broken glass copping on top of walls in CM 1:3 complete all as specified and directed.
