Repair/Renovation Of Temple At Mattan Anantnag- 1 Repair/ Renovation of Devri Paths 2 Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed (REPAIR) 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 5 Providing and laying of stone soling, ramming, compaction and proper dressing incl carriage all complete. 6 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 7 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 8 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) for jacketing on seapage spots of already existing path walls 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 10 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 11 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 12 P/L CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 13 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade 14 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 Km 15 Construction of Yatri Sheds 16 Providing and laying chisel dressed Devri Stone of size 300x200 mm facewith 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) uptoplinth level including curing. One face dressed Fine chisel dressed 17 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 18 Dismantling dressed stone work ashlar face stone work, marble work orprecast concrete work manually/by mechanical means including stackingof serviceable material and disposal of unserviceable material within 50meters lead as per direction of Engineer-in-charge: In cement mortar 19 Providing and laying of stone soling, ramming, compaction and proper dressing incl carriage all complete. 20 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 21 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) 22 Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. Riveted and bolted 23 Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws, imported wood 24 Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately (Paanch Murabah) 25 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 Km 26 Repair/ Renovation of Hawan Kund 27 Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed (REPAIR) 28 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 29 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) 30 Dismantling dressed stone work ashlar face stone work, marble work orprecast concrete work manually/by mechanical means including stackingof serviceable material and disposal of unserviceable material within 50meters lead as per direction of Engineer-in-charge: In cement mortar 31 Providing and laying of stone soling, ramming, compaction and proper dressing incl carriage all complete. 32 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 33 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 34 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 35 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. ornamental work 36 Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge: 37 Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar 38 P/L CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 39 Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 40 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade 41 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 KmSand + Stone Agg 42 Repair/Renovation of Gori Kund Paths 43 Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) uptoplinth level including curing. One face dressed Fine chisel dressed (REPAIR) 44 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 45 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) 46 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar 47 Providing and laying of stone soling, ramming, compaction and proper dressing incl carriage all complete. 48 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 49 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 50 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 51 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. ornamental work 52 Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge: 53 Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar 54 P/L CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 55 Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 56 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade 57 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 Km sand and aggregates 58 Repair/ Renovation of Dharamshala 59 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 60 P/L CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 61 Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 62 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade 63 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 64 P/L Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 25mm thick with 12.5 mm nominal size stone aggregate. 65 Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws imported wood 66 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 67 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 Km sand and aggregates 68 Rectification of Ttile Path inside the Temple 69 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm 70 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 71 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300mm x 20mm) with SRI (solar refractive index) > 78, solar reflection> 0.70 andinitial emittance > 0.75 on waterproof and sloped surface of terrace, laidon 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarsesand) and grouting the joints with mix of white cement & marble powderin ratio of 1:1, including rubbing and polishing of the surface upto 3 cutscomplete, including providing skirting upto 150 mm height along theparapet walls in the same manner. 72 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 Km sand and aggregates 73 C/O Retaining Wall behind the Temple 74 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Hard Rock (Blasting prohibited ) 75 Providing and laying of stone soling, ramming, compaction and proper dressing incl carriage all complete. 76 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) 77 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 78 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 79 CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Upto 25 Km sand and aggregates 80 Repair/ Renovationof Parks 81 Renovating lawns including weeding, cheeling the grass, forking theground, top dressing with sludge or manure mixing the same with forkedsoil, watering and maintaining the lawn for 30 days or more till the grassforms a thick lawn free from weeds & fit for mowing & disposal ofrubbish as directed, including supplying good earth if needed butexcluding the cost of sludge or manure (the good earth shall be paidseparately.) 82 C/O Prefab Hall 83 Earthwork in excavation by mechanical means (Hydraulic excavators)intrenches for foundation, drains, pipes, cabels etc (not exceeding 1.5 M, in width) and for shafts, wells, cesspits and the like not exceding 10Sqm on plan, depth upto 1.5M including disposal ofexcavated earth upto 1mtrs from cutting edge, disposed earth is to be levelled and neatly dressed in all kinds of soil. 84 Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. 85 Providind and laying in position cement concrete of specified grade excluding the costs of centering and shuttering-all work upto plinth level. 1:4:8 (1cement: 4coarse sand : 6 crushed aggregate 40mm) excluding coast of carriage 86 Providing and laying in positionSpecified grade of reinforced cement concrete excl c/o centering and shuttering, finishing and reinforcement all work 1:1.5:3 (1cement:1.5coarse sand: 3graded stone aggregate 20mm nom size). Excluding cost of carriage. 87 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 88 Providing and laying in position cement concrete of specified grade excluding the costs of centering and shuttering-all work upto floor V level. 1:2:4 (1cement: 2coarse :4 sand, crushed aggregate 20mm), excluding cost of carriage 89 Supply and filling of Stone dust/stone screenings at site incl loading unloading carriages complete. 90 Centering and shuttering including shutting, proping etc and removal of same work.Walls 91 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 92 12 mm cement plaster walls, Plinth, etc of mix 1:4 complete job. 93 Providing and fixing offirst quality ceramicfloor tile of standard quality conforming to IS 15622 in white, ivory, grey colours including grouting of joints with white cement and matching pigment complete job as approved by EIC. 94 Providing and fixing offirst quality ceramic glazed wall tile of standard quality conforming to IS 15622 in white, ivory, grey colours including grouting of joints with white cement and matching pigment complete job. 95 Providing and fixing of PP-R (Poly proplene Random copolymer ) pipes SDR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply incl all PP-R plain and brass threaded Polypropytene random fittings I/C fixing the pipe with clamps at 1.00 spacing this includes testing of joints complete as per direction of Engineer - in - charge. internal work exposed on wall with clamps at 1 m. PN-16, 25mm OD 96 PN-16, 32mm OD 97 PPR fixtures & fittings of app brand and manufacture. Female elbow 25mmx1/2 98 Female Tee 25mmx12mm 99 Plain Elbow 25mm 100 Plain Socket25mm 101 F.Red 32x25mm 102 Plain Elbow 32mm 103 Plain Tee 32mm 104 Plain Socket32mm 105 Union 25mm 106 Union 32mm 107 Ball Value 25mm (Brass) 108 Tanky conector 32mm 109 Providing and fixing of PVC Soil / Waste/ Ventilating pipes of Prince or equivalent of following sizes excl cost of fittings. 100mm pipe 110 75mm pipe 111 Providing fixing of PVCfixtures and fittings of prince or equivalent of app brand and manufacture complete.Floor trap 75mm 112 Door bend 75mm 113 Plain Bend 75mm 114 Plain Tee 75mm 115 Plain Bend 100mm 116 Door Tee 100mm 117 Plain Tee 100mm 118 Coller 100mm 119 Coller 75mm 120 Reducer 75x100mm 121 Providing and fixing of CP fixtures of Jaguar/ Hindware/ Rak/ Cera/ Kohler/ Essel make including jointing testing and making good the surface (CeraSeries)telephonic Wall mixer 15 mm NB 122 Health fosset with Chain 123 Angle value 124 C.p gratings 125mm nom dia with 25mm hole 125 C.P Waste Coupling 15mm 126 PVC connection 18 127 C.p nipple 15mm 128 Towel rod 2-0 129 Soap case 130 Fancy type Looking Mirror 131 CP waste pipe 132 Providing and fixingof W/C white china Pedastal type W C pan with seat and lid with CP brass hinges and rubber buffers, 10 liter low level flushing cistern with fittings and brackets, 40 mm flush bend all complete required at site . (White solid plastic seat and lid.) 133 Providing and fixing wash basin with padestal C.I./M.S brackets of approved make with 32mm C.P. brass waste of standard pattern, including cutting and making good the walls wherever required: wash basin size 450x300mm size all inclusive 134 Providing and fixing of PVC water storage tanks excluding independent stagging 135 Proving/ installation of water heater gysers incl making of necessary connections complete.(Venus) 50ltrs 136 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 137 Structural Steel 138 Providing anf fixing of 16mm Anchor bolts (450mm length) consist of threaded end to which and nut and washer can be attached for the extenal load . 139 The P/F pufpanels in walls with tongue and groove fittings 75 mm thick (size, colour etc to be recommended by engineer incharge) complete incl all charges of carrigeA) Walls 140 B) Ceilling 40mm thick 141 Providing hi rib sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m, including Ridges and Valleys. 142 Providing fixing of colour coatedCorner flashing incl cost of scews and washers carriage complete. Corner flash Outside (300mm width) 143 Providing fixing of colour coatedCorner flashing incl cost of scews and washers carriage complete. Corner flash Outside (150mm width) 144 Providing fixing of colour coated U-channel incl cost of scews and washers carriage complete. 145 Providing and fixing factory made PVC door frames of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitredat corners and jointed with two numbers of 150mm long brackets of 15x15mm MS square tube, the vertical door profiles to be reinforced with 19x19mm MSsquare tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using MS screwsof 65/100mm size complete as per manufacturers’ specifications and directions of engineer-in-charge 146 Providing and fixing 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. framecoveredwith 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat . Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.Pre-laminated PVC door shutters with 5 mm glass where ever needed. 147 Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture 148 Constructing brick masonrymanhole in cement mortar 1:4 mix R C C slab with 1:2:4 mix , foundation concrete 1:4:8 mix , inside plastering 12 mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix finished with a floating coat of neat cement complete as per standard design . inside size 90×80 ×45cm deep including C I cover with frame ( light duty) 455 × 610 mm internal dimensions total weight of cover and frame to be not less than 38 kgs ( cover 23 kgs and frame 15 kgs). with FPS bricks with class designation 75 ( crushed stone aggregates) ) complete job. 149 Dry random rubble masonry with hard stone using quarry stones in soakage pits incl. cost of bond stones & all carraiges upto site of work comp. (Includiing head load if any) 150 Brick work with common burnt clay (non-modular) bricks of class designation 75 in foundation and plinth including curing Cement mortar 1:4 (1 cement: 4 coarse sand) 151 Carriage of material from source to site complete. Aggregate/Sand Ave, lead 20kms Sand Ave, lead 20kms 152 C/O Gate No. 1 153 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 154 P/L Stone soling/RBM i/c leveling , conslidation with 8-10T PRR including cost andcarriage of all materials involved (complete job). 155 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 156 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) i/c all carriages 157 Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 158 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 159 Centering and shuttering including strutting, propping etc. and removal of formwork for foundations footings etc 160 Centering and shuttering including strutting, propping etc. and removal of form for:Arches, domes, vaults upto 6 m span 2281.20 161 Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) including curing complete in:Above plinth level and upto floor V level 162 Cement plaster in 12 mm thick in 1:4 mix mortar. 163 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 164 Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) 8.39.1 Kota stone slab exposed face dressed & rubbed 165 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture 166 Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm 167 carriage of material by using mech tpt for an average lead of 50 kmssand/bajree 168 carriage of material by using mech tpt for an average lead of 50 kms BRICKS 169 C/O Gate No. 2 170 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 171 P/L Stone soling/RBM i/c leveling , conslidation with 8-10T PRR including cost andcarriage of all materials involved (complete job). 172 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 173 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) i/c all carriages 174 Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 175 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 176 Centering and shuttering including strutting, propping etc. and removal of formwork for foundations footings etc 177 Centering and shuttering including strutting, propping etc. and removal of form for:Arches, domes, vaults upto 6 m span 178 Cement plaster in 12 mm thick in 1:4 mix mortar. 179 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 180 Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) 8.39.1 Kota stone slab exposed face dressed & rubbed 181 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture 182 Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm 183 carriage of material by using mech tpt for an average lead of 50 kms 184 C/O Two No. of Public Toilet Complex 185 Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting. 186 Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete. 187 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:4:8 (1Cement: 4 fine sand: 8 graded stone aggregate 40mm nominal Size) 188 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:3:6 (1Cement: 3 fine sand: 6 graded stone aggregate 20mm nominal Size) 20% BOULDER 189 Centering and shuttering including strutting, propping etc. and removal of form for:A) Foundations, footings, bases of columns etc. for mass concrete. 190 B) Suspended floors, roofs, landings, balconies and access platforms. 191 C) Edges of slabs and breaks in floors and walls: Under 20 cm wide 192 Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) & 1:4 for half brick wallA) In superstructure 193 B Halfbrick wall 194 Providing and fixing of aluminiumDoors,windows.with prelaminated boards and glass shutters COMPLETE JOB with all fixtures and accessories (N.S.I.) 195 Providing and laying in position specified Grade of Reinforced cement concrete excluding the cost of centring, shutering and finishing of all work.1:1.5:3(1 Cement : 1.5 Coarse sand: 3 Graded stone aggregates 20 mm nominal S) 196 Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. 197 Filling by Available excavatedearth (excluding rock)in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. 198 Supplying and filling in plinth with fine sandUNDER FLOORS including watering rammiing ,consolidating and dressing complete.. 199 Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 12.50mm nominal size stone aggregate (crushed) 200 PLASTER WORK12mm thick plaster in Cement Mortar 1:4 mix. 201 15mm thick plaster in Cement Mortar 1:6 mix. Including a floating coat of neat cement. 202 Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank (Syntax), or equivalent having valid ISI license) complete @ Rs8.75 /ltr + base support Rs2.25/ltr 203 Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes/ channels etc 204 Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick 205 Providing and fixing of Eaves boarding of size 250x32mm thick 2nd class kail wood. Including painting all complete. 206 Providing and fixing of 20 mm thick butt jointed Wooden planks for soffits incl cost of nails, screws etc including painting with synthetic enamil paint all complete. Budloo Wood 207 Providing wood work in frames of false ceiling/ ceiling joists partitions etc ( Ist Class Budloo Wood)including fixing by nails ,screws etc all complete.(Size 2x 2.16) @ 2 c/c. 208 Providing and fixing of 50x50 mm wooden cornice incl cost of nails, screws etc including painting with synthetic enamil paint all complete. Budloo Wood(N.S.I.) 209 Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steelpulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer. 210 Providing and fixing of CVPC pipes having thermal stability for hot and cold water supplyincluding all CVPC plain and brass threaded fittings like joints etcits testing internal work concealed and making good the wall A) 15mm dia. Nominal bore 211 B) 20mm dia. Nominal bore 212 Providing and fixing C.P. ball valve of approved quality.a) 15mm dia. Nominal bore 213 b) 20mm dia. Nominal bore 214 Providing and fixing of PVCsoil wastepipein proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation. (N.S.I.)a) 100mm dia. Pipe 215 b) 75mm dia. Pipe 216 Providing and fixing of floor trap complete PVC made. a) 100mm dia 217 Providing and fixing of PVC flexible connections (n.s.i.) 218 Providing and fixing following PVC fixtures approved quality.(N.S.I.)a) 100 mm size door junction a) 100 mm size 219 plain bend a) 100 mm size 220 collars a) 100 mm size 221 Reducers 100mm to 75mm 222 Cowel a) 100 mm size 223 plain bendb) 75m size 224 collars b) 75m size 225 Providing and fixing 1st quality ceramic glazed WALL tiles conforming to IS: 1375 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA,, in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dodos over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. 226 Providing and fixing 1st quality ceramic glazed floortiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete 227 Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware / Hind ware /Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests.indian Type 228 European type 229 Providing and fixing wash basin (Cera) with CI/MS/ brackets including painting of fittings and brackets, cutting and making good walls wherever required white vitreous china wash basin size 630x450mm with a pair of 15mm C.P. brass taps and 32mm dia. C.P. brass union. 230 Providing and fixing 600x450mm beveled edge mirror of specified brand mounted on 6mm thick plywood/hardboard including cost of wooden/PVC plugs and CP brass screws. 231 Providing and fixing white vitreous china flat backlipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with 5litre flushing cistern. 232 providing and Fixing urinal Partition with marble sheet complete job (N.S.I.) 233 Providing and fixing C.P. brass bib cock of approved quality Parko / Marc )15mm nominal bore 234 Providing and fixing C.P. Long bend of approved quality.40mm 235 Providing and fixing C.P. brass angle valve of approved quality Parko / Marc) 15mm nominal bore 236 Providing and fixing C.P. Nipples of approved quality.25mm to 50mm long 237 Providing and fixing C.P.Cups of approved quality. 238 Providing and fixing C.P.Gratings of approved quality. 239 Providing and fixing Jabalpor Master trap of approved quality. 240 Providing and fixing soap cases of approved quality. 241 Providing and fixing C.P towel rod600mm long of approved quality. 242 Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cementand making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal sizefinished witha floating coat of neat cement complete.size 450x450x450 mm. 243 C0NSTRUCTION OF plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed. 244 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 245 Distempering with 1st qualityacrylic distemper ready mixvoc content less than 50gm/ltr two or more coats 246 Providing and fixing of lighting points in 1.5mm square CU wire with FR Insulation duely ressissed in walls, ceiling / passing through conduits including cost of 5 Amp switches all complete. 247 Providing and fixing of heating points in 2.5 mm square Multi strand CU wire with FR Insulation duely ressissed in walls, ceiling / passing through conduits all complete. 248 Providing and fixing ofS S combine 3 pin 6 Amp. 249 Providing and fixing of fency type dome light. 250 Providing and fixing of bulk heads. (Exterior side) 251 Providing and fixing of 7/16 PVC insulated wire. 252 Providing and fixing ofMCB SP.6 to16 Amp 253 32 Amp 254 Providing and fixing of 6 way MCB box and angle Iron 4 legged switch board with asbstos sheet. 255 Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading thepipe etc. and obtaining the permission from concerned department allcomplete 25 to 40 mm nominal bore 256 Providing and fixing of manhole cover made up of 5mm thick M.S Sheet with 40x40x5mm angle frame including hinges and handle. Size 450x 450 mm. Septic tank 257 Soakage pit 258 Dry Random Rubble Masonry with hard stone from quarry in foundation and plinth using Nallah with bond stones. 259 Engagement of JCB for demolishing old Structure and Clearance of site incl. all complete job as per directions of Engineer in Charge: 260 Engagement of manual labour for removing items from old Structure and Clearance of site incl. all complete job as per directions of Engineer in Charge: 261 Carrige of sand 25 km 262 Carrige of aggregate 25 km 263 carriage of stone 10 km 264 Carrige of Bricks 3 km from mattan kiln 265 Electric 266 Wiring forlighting points/fan points/exhaust fan points/call bell points with 2x1.5 sq mm FRLSPVC insulated flexible stranded copper conductor wiresin recessed or surface medium class PVC conduit, with 240V6A modular switch ,modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLSPVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) including the cost of conduit. 267 Supply, Installation, Testing and Commissioning of 15 Watt/+ LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, Operating temperature -10°C to +45°C.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). 268 Supply, Installation, Testing and Commissioning of 50W (Havells/ PhillIps/Wipro skyline ) new generation energy saving and environmental friendly long life L.E.D Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w ,CRI>80 ,CCT>5000 ,Avg Life L70 50000 hours ,No haremful UV and IR radiators, Operating Temp -10 to 45C ,Surge Voltage Protection, IP66Protection and impact resistance of IK07.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. 269 Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans 5 Star BEE Rated BLDC Remote Controlled,,30W,3 no.of blades , 340-410 rpm,AC 230V 50Hz, high Quality Copper Motor with double ball bearing incl. 1N Downrod,Shackle Assembly, cost of ceiling rose (if required) and making of necessary connections.The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department.(To be got approved before installation from EIC).Crompton Energion Hyperjet/ V Guard Windle Deco / Havells Artemis. 270 Supply, Installation, Testing andComm. Of 200/250mmsweep exhaust fan Shutter type of havell /Bajaj/ Crompton/equivalent make as directed by engineer incharge,Air Flow capacity >850cmph, 35-50Watts,Noise level 44db, 1200 rpm,water resistant, including making of space in wall/ window as per site requirement and necessary connections.The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department.(To be got approved before installation from EIC) 271 Wiring forlight/power plug points (15/16A heating points) with 2x4 sq mm FRLSPVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLSPVC insulated copper conductor single core cable forearthing, etc. as required.(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) including the cost of conduit. 272 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.( Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena make). 273 Wiring for5- 10A socket out lets for computer (inverter) with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessedmedium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required.including the cost of conduit. 274 Supplying and fixing of GI box along with modular base and cover plate for modular sockets, switches in recess etc as required 6 module (200mm x 75mm) 275 Supplying and fixing of 5pin 5-10A socket and 5-10A switch on existing modular plate, incl connections etc as required. (Havells/SSK/Anchor/ABB/Schneider) 276 Supplying and fixing ofindicators on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent). 277 Supplying and fixing modular blanking plate on the existing modular plateswitch box excluding modular plate as recquired. 278 Supply and fixing of 8 way (4+24), Double door surface/ recess mounting, Horizontal type, 240 V, SP&NMCB distribution board of sheet steel, dust protected, duly powder painted, inclusive oftinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. (Havells/Legrand/SSK/Schnider/ABB) 279 Supply, installation, testing and commissloning of 5-32A single pole rating 240/415V, 10 KA C curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCBdistribution board complete with necessary connections. 280 Supply, installation, testing and commissioning of 32A DP rating 240/415V,10 KA C curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 281 Supply, installation, testing and commissioning of 40A DP rating 240/415V,10 KA C curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 282 Supply, installation, testing and commissioning of 63A DP rating 240/415V,10 KA C curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 283 Supply, installation, testing and commissioning of 100A DP rating 240/415V,10 KA C curve MCB of Legrand/ Havells/L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 284 Supply, installation, testing and commissioning of 100A 4Pole Connector inside PVC enclosure of Legrand/ Havells/L&Tcomplete with necessary connections. 285 Wiring for Circuit/Sub mains along with earth wire in FRLSPVC insulated 660/1100 volt grade flexible stranded copper conductor wiresin recessed or surface conduiting system, including the cost of conduit. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). A)1x10 sq mm 286 B)2x 2.5 sq mm + 1x 2.5 sq mm Lighting circuit 287 Earthing with Gl earth pipe 4.5 mtr. Long 40 mm dia. Including accessorles and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt. 288 Providing and laying earth connection from earth electrode with 67SWG dia GI wire in 15mm dia GI pipe from earth electrode to controlling panel / DB including connection with GI thimble, excavation and refilling as required. 289 Supply, laying, connecting and commissioning of 25 sq mm 2 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). 290 External ElectrificationSupply, Installation, Testing and Commissioning of Heritage architectural ornamental decorative cast iron pole as perspecification/ drawing (enclosed)Dwarka make /Karara Mujasame or of Equivalent standardmake with the following specifications:- The pole shall look like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The Cast Iron Pole of 3.5 Mtr (3500mm) length has ornamental base (Approx. overall dimension-height 1050mm,bottom dia 375mm) shall have a provision of inbuilt junction box for fixing MCB’s/Connector or cutouts with detachable window cover including their costs. The part above ornamental base design consists of decorative sections of circular shapes& collar in different dimension, is made of cast iron in fine finish. The design of the cast-iron parts is clearly shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%)Further the pole shall be got approved by the concerned engineering wing after providing a sample before execution of work and the test certificate to be provided by the manufacturer. 291 Supply and fixing of ornamental Cast iron and mild steel 2 way bracket painted with anti-corrisive enemal paint as per design , of Dwarka india/Karara Mujasseme of equivalent make/design (as per enclosed drawing) The bracket should have a provision of fixing LED luminaries (warm) on both sides as shown in the drawing ,including the cost of Aluminium light fixture with 40W led light including globe i.e complete job. Further the bracket shall be got approved by the concerned engineering wing after providing a sample before execution of work and the test certificate to be provided by the manufacturer. 292 Earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 293 Providing and laying in position cement concreteincluding curing but excluding the cost of shuttering and centring with1:1.5:3 (1 cement, 1.5 Coarse sand, 3 Graded stone aggregate 20 mm nominal size). The dimensions of the block should be 3x2x2. 294 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more with 125kg/cum. 295 S/L , testing and commissioning of PVC alluminium armoured cable650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard makeas directed by engineer incharge andmaking end termination with brass compression gland and aluminium lugs of required size. a) 25 sq.mm 4 core 296 B) 10 sq.mm 4 core 297 Providing of service connection and earthings to luminaire from the junction boxin 1.5 mmPVC insulated, multicolour copper wire (FRLSH) . Havells/Polycab/SSK/KEI. 298 Providingof earthing by way of digging 10 deep pit then embedding 2x2, 5mm thick copper plate connecting the plate with main panel board and servo by 10 SWG copper wire with 1/2 dia. Full thread brass nut and bolt and washers. Refilling of pit with alternate layers of salt coal and earth. 299 Supply and installation of Spiral Earthing through 10 swg GI wire after driving in ground up to adepthof3 in the ground from the base of the pole. 300 S/I testing and comm. Of three phase 10 KVA 50HZ oil cooled(Transformeroil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(A.E / Cosco/Chinar/ Kashmir Elctrcls make) having an inputvoltage ranging from 156V to 415 V ( phase to phase)and balanced output voltage of 415V, +/- 1%. (Test certificate to be provided by the manufacturer) The unit incorporate.a) 0-500V moving iron type voltmeter with selector switch.b) A three phase change over switch to read voltage on incoming and output sidec) indicating lights 6 No two numbers for each of the motorised units, one for lower limit and other for higher limit.d) six push button control for movement operation of three motorised dimmer units two for each unit i.e one for raise operation and one for lower operation under the conditions of adjustment of auto/mannual selector switch (DPDT) e) Single phase Preventer ( contactor Switch of required rating) Legrand make.f) six potential meter resistance with lock meter two for each phase control, one for sensitivity and other for level control.g) two sets of indication lamps three numbers each to indicate output and input indicationh) 20 % over load bearing capacity for one hour. 301 Carrying out foundation of PCC type,cement concrete to be carried in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)in foundation of servo stabilizer set, paneletc including form work etc as required the job also includes supply and carriageetc of the requsite material upto thesite. 302 P/F of sheet steel Kiosk suitable to house10 KVA servo stabilizerfabricated out of 16 SWG M.S sheet having front door with locking arrangements and duly powder coated. 303 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, , vermin and dust proof, outdoor type with suitable size of angle iron legs grouted in the cement concrete., with lockable type hinged doors, duly painted with provision for fixing ofincomer MCCB,outgoing DP MCBS, sets of Aluminium Bus Bar of different rating. after taking Derating factor into account, and other allied accessories etc. as required. the panel to be fabricated from reputed firm duly approved by CPRI.as per approved design, size may vary as per site requirement) 304 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.INCOMING:b)100 amp TPN MCCB35 KA including spreader links, (Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/L&T/ABB make. 305 b) 4 No. of Aluminium Bus Bar of 250 Amp. 306 c)Digital meters and phase indicators -1 set. 307 d) Astronomical timer with 4 pole contactor of suitable capicity. Legrand/ L&T /ABB make 308 OUTGOING:a) 63 amp TPN MCB 309 b)space for 8 way MCBS 310 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in groundincluding excavation and refilling the trench with soft excavated earth making the surface level but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
