Tender For Solarized Community Rooms Using Traditional Material For Elderly Nuns Care At Lingshed.(Under Sdp)- 1 Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, asdirected by Engineer-in-charge. 2.7.1 All kinds of soil 2 Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 3 Dumping stone including cost of stones. in Horizontal on level 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 5 Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) 6 Random rubble masonry with hard stone laid dry in foundation, plinth & wallsLaid without bond stone 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more 10 Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns 11 Centering and shuttering including strutting, propping etc. and removal of form work for :4.3.3 Columns, piers, abutments, pillars, posts and struts 12 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers 13 Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform 14 Centering and shuttering including strutting, propping etc. and removal of form work for :Stairs, (excluding landings) except spiral-staircases 15 Centering and shuttering including strutting, propping etc. and removal of form work for :Edges of slabs and breaks in floors and wallsUnder 20 cm wide 16 Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 17 Providing & fixing upto floor five level precast cement concrete solid blocks includinghoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost ofrequired centring, shuttering and curing complete1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominalsize) 18 Providing & fixing upto floor five level precast sun dried mud bricks in mud mortar using approved quality mud with carriage of material complete. 19 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class Kail wood 20 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class kail wood 9.5.5.1 35 mm thick shutters 21 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. 1st Class Kail wood 30mm thick 22 Providing and fixing round beams (local Ballies), including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete job; Average diameter 225 mm 23 Providing and fixing local talboos (Second order branch willow tree) including providing an ornamental look and fixing with nails complete job 24 Providing and laying 200mm thick mud pushka over talboos with 5mm thick dry grass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC 25 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) 26 20mm thick mud plaster using approved quality of earth. 27 6 mm cement plaster of mix1:3 (1 cement : 3 fine sand) 28 Providing and applying white cement based putty of average thickness 1 mm ofapproved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 29 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.13.81.2 Two coats 30 Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;2nd class kail wood 31 French spirit polishing : Two or more coats on new works including a coat of wood filler 32 Melamine polishing on wood work (one or more coat). 33 Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm 34 Providing and fixing bright finished brass tower bolts (barrel type) with necessaryscrews etc. complete :100x10 mm 35 Providing and fixing bright finished brass handles with screws etc. complete:100 mm 36 Providing and fixing bright finished brass handles with screws etc. complete: 125 mm 37 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/sqm 38 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Budloo/Fir wood 39 25 mm wooden planking, tongued and grooved in flooring, including fixing withiron screws complete with: 1st class kail wood 40 Providing and fixing 100mm Pine wood plain lining tongued and grooved,including wooden plugs complete with necessary screws and priming coat onunexposed surface. 10 mm thick 41 Providing and fixing 12 mm thick pre laminated flooring of approved brand asper direction of engineer incharge, complete job AC-4 including carriage. 42 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 43 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): 21.1.1 For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 44 Providing and fixing 12mm thick prelaminated particle Board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. 45 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.). With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 46 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50micron aluminium. 47 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coatingnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to requiredcolour or shade, with necessary screws etc.complete : 150x10 mm each 48 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingHot finished welded type tube 49 Providing and laying 60mm thick factory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge. 50 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 51 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 52 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm . 53 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work 54 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete 55 Carriage of cementfrom an average lead up to 220 Km by Mechanical Transport 56 Carriage of sand and coarse aggregates from an average 120 km by Mechanical Transport 57 Carriage of stones from an average lead up to 7 km by Mechanical Transport 58 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. 59 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 60 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 1500x450 mm 61 Providing and fixing toilet paper holder :C.P. brass 62 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. 63 Providing and fixing brass bib cock of approved quality. 15mm nominal bore. 64 Providing and fixing flow trap of PVC 65 Províding and fixing soil, waste and vent pipes A) 100mm dia PVC. 66 Províding and fixing soil, waste and vent pipes B)75mm dia PVC. 67 Providing and fixing of plain bends of required degree.A) 100mm dia PVC. 68 Providing and fixing of plain bends of required degree.B) 75mm dia PVC. 69 Providing and fixing 3 layer PPR (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings 1/C fixing the pipe withclamps lat 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) 20 mm OD 70 Providing and fixing 3 layer PPR (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings 1/C fixing the pipe withclamps lat 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) 25 mm OD 71 Providing and fixing of material for the insulation of pipe with nitrile tube, tapping with cello tape, Rockwood 6 inch per side, wire mesh, polythene, tapping with cello tape aluminum sheet 26 gauge cladding with dia. complete job including carriage. 19 mm thick, 50 mm dia (OD) (PPR 32 mmm) 72 Providing and fixing of material for the insulation of pipe with nitrile tube, tapping with cello tape for inner wall fittings. complete job including carriage. 19 mm thick, 50 mm dia (OD) (PPR 25 mmm) 73 Providing and placing on terrace (at all floor level) polyethylene water storage tank ISl:12701 marked indicating the BIS License NO. with cover and Suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or Equivalent having valid ISI License) 74 Providing and fixing of material for the insulation of Water Storage Tank of with nitrile sheet, tapping with cello tape, Rockwood 6 inch per side, wire mesh, polythene, aluminum sheet 26 gauge cladding with dia of, complete job. 19 mm thick nitrile sheet 75 Providing and fixing C.P Brass angle valve for basin, mixer and geyser 76 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre longwith S.S. triangular plate to Eureopean type W.C. of quality and make as approvedby Engineer - in - charge. 77 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter 78 Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour. Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not lessthan 45gms. 79 Providing and fixing C.P Jalli 80 Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty)the weightof the cover to be not less than 23 kg. 81 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 82 Towel rail C.P. brass 750 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail 83 Wiring for light point 6amp socket/exhaust fan point /call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 075 Sq.mm. FR PVC insulated copper conductor Single core cable as required 84 Wiring for 16amp socket outlet with 2 sqmm FR PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required 85 Supplying and fixing of 25mm PVC conduit capping along wíth accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. 86 Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box cornplete as required including connection. 87 Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 10amp 240 volt single pole mounted in recessed including M.S box complete as requird.. 88 Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as required 89 Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess comnplete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN. 90 Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips 91 Supply of 1100 volt grade aluminium conductor KPLE insulated PVC sheath arranged complete as per specification as required 25 sqmm, 2 core 92 Wiring for changeover 63 amp and installtion with complete accessories and holes on the wall as required 93 Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia GI pipe ISI marked and 3 meter length, with 40mm x 6mm thick, the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should bemaintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC 94 Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. A) Single pole 6/10/20 Amp 95 Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. C) Double pole 63 Amp 96 Junction box 3 inchs 250 grams G.I with holes for connections submersed in concrete with connections as required. 97 Supplying and providing in place exhaust fan 200mm of apporved brand. Phillips Havells 98 3 modular plate 99 6 modular plate 100 8 modular plate 101 12 mudulr plate
