|
| 1 | Removing cement tiles, or marble or polished shahabad floor or dado without bedconcrete including stacking the materials as directed with all leads, lifts etc. complete(SSR Item no. 46.19, page no. ) |
| 2 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(SSR Item no. 24.01, page no. ) |
| 3 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 ( group Bla) of approved make, shade and pattern for flooring in requiredposition laid on a bed of 1:4 cement mortar including neat cement float, fillingjoints, curing and clearing etc. complete.complete. (SSR Item no. 33.40, page no.) |
| 4 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mmx 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( groupBla) of approved make, shade and pattern for dado and skirting in required position fixedin 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc.complete(SSR Item no. 33.41, page no.) |
| 5 | Providing and fixing Country cut teak wood single leaf panelled door shutter withoutfanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mmand bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial plyfaced T.W. particle board with phenol formaldehyde synthetic resin (Generallyconfirming to ISI 3097) excluding frame, including stainless steel fixture andfastening and T.W. beading to junctions of panelled inserts and as instructed by theEngineer in charge including 3 coats of oil painting etc. complete. (SSR Item no. 38.26, page no.) |
| 6 | Providing structural steel work in trusses, other similar trussed purlins and members withall bracing, gusset plates etc. as per detailed designs and drawings or as directedincluding cutting, fabricating, hoisting, erecting fixing in position, Making riveted/bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oilpainting approved quality and shade etc. complete. (SSR Item no. 23.04, page no.31) |
| 7 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt.total on each side ) profiled sheets for roofing. The feed material is manufactured out ofnominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel withmin.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy(55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality superdurable polyester paint coat ( with inorganic pigment). The paint shall have a totalcoating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on topsurface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle squarefluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall bedesigned for anti-capillary groove. and return leg. The feed material should have coilmanufacturers product details marked a regular interval. Including fasteners with min.fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc.complete. (weight of profile 4.52 Kilogram/ One Square Metre) (SSR Item no.38.34 , page no.31) ) |
| 8 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirmingto I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required positionlaid on a bed of 1:4 cement mortar including cement float, filling joint with white/colourcement slurry cleaning curing etc. complete (SSR Item no. 33.24, page no.31) |
| 9 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. andconfirming to corresponding I.S. for dado and skirting in required position withreadymade adhesive mortar of approved quality on plaster of 1:2 cement mortar includingjoint filling with white/ colour cement slurry cleaning curing etc. complete. (SSR Item no.33.25, page no.) |
| 10 | Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm,confirming to corresponding I.S. for flooring in required position laid on a bed of1:4 cement mortar including cement float, filling joint with cement slurry cleaning curingetc. complete. (SSR I.T.NO. 33.66) |
| 11 | Providing and applying water proofing treatment using acrylic polymer modifiedcement based water proofing coating with fibre glass mesh mixing at the rate ofpowder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram withtwo coat using approved chemicals for masonry and concrete surface by brush covering7 years guarantee on Stamp Papers etc. complete. SSR I.T.NO. 31.09 |
| 12 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with allequired screws and nuts etc, complete. Withpowder coating without boxSSR I.T.NO. 39.4 |
| 13 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. SSR I.T.NO. 35.21 |
| 14 | Providing and applying Two coats of wall care Putty on plastered surface and Ceilingand Walls to prepare surface even and smooth of approved make, etc complete.SSR I.T.NO.32.34 |
| 15 | Providing and applying plastic emulsion paint of approved quality, colour and shade to oldand new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)etc. complete.SSR I.T.NO. 36.12 |
| 16 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mmdia including P or S trap cast iron soil and vent pipe upto the outside face of the wall(1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with allnecessary pipe connection etc. complete.SSR I.T.NO. 42.33 |
| 17 | Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS14856 (2000) (Reaffirmed 2006) without ventilator including chromium platedfixtures and fastening with chromium plated handles on both sides, etccomplete..SSR I.T.NO. 39.59 |
| 18 | Providing and fixing frame work of galvanised iron for suspended false ceilingwhich includes galvanised iron perimeter channels of size 27 mm and 0.5 mmthick having one flange of 20 mm and another of 30 mm along with perimeter of theceiling, fixing in brick wall / partition with the help of rawal plugs and screws,suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick withtwo flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised ironhanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thicknesshaving curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with the help of connecting clips and in directionperpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at230 mm centers; fixing screws mechanically either with screw driver or drilling machinewith suitable attachment etc. complete. SSR I.T.NO. 38.15 |
| 19 | Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrousplaster of paris including scaffolding if necessary all architectural work like mouldings,cornices, coves, domes, cups as per detailed drawings and three coats of spraypainting to boards etc. complete. (excluding frame work, runners and mild steelsuspenders). SSR I.T.NO.38.17 |
| 20 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C.flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixingthe cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement includinglead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall SSR I.T.NO. 41.57 |
| 21 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3without neeru finish to concrete surface in all positions including scaffolding and curingetc. complete.SSR I.T.NO. 32.02 |
| 22 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existingpipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. SSR I.T.NO. 42.55 |
| 23 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessarysocket union nut complete. SSR I.T.NO. 41.40 |
| 24 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brassincluding necessary sockets/union nut completeSSR I.T.NO. 41.45 |
