Tender For Development Of Labs For Marine Studies Department At Grounf Floor, Rajiv Gandhi Building, Vidyanagri Campus, University Of Mumbai, Mumbai-400098- 1 Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. As per PWD DSR-2022-23, Item no. 36.19 2 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. As per PWD DSR-2022-23, Item no. 32.34 3 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. As per PWD DSR-2022-23, Item no. 35.21 4 Providing and applying plastic emulsion paint of approved quality, colour and shade surface in twocoats including scaffolding, preparing the surface. (excluding primer ) etc. complete As per PWD DSR-2022-23, Item no. 36.13 5 Providing internal cement plaster 6mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. As per PWD DSR-2022-23, Item no. 32.01 6 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. completeAs per PWD DSR-2022-23, Item no. 33.42 7 Providingsecond class Burnt Brickmasonrywith conventional/ I.S. type bricks in cementmortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete As per PWD DSR-2022-23, Item no. 27.05 8 Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. TheCement Mortar1:3plaster isconsideredfor renderingunevenandhoneycombedsurface, only. Newlylaidconcreteshallbecoveredby gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fullyautomatic microprocessor based PLC with SCADA enabled reversible DrumType mixer/ concreteBatchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD DSR-2022-23, Item no. 24.06 9 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cm thick including hand packing and compacting etc. complete. PWD DSR-2022-23, Item no. 21.38 10 Filling tiles joint portionof flooring and dado filling with white cement by removing existing loose morter/ cement slurry fromjoint with tools and finishwithwashing cleaning and curing etc. complete. PWD DSR-2022-23, Item no. 46.56 11 ProvidingandfixinginpositionTMT-FE-500barreinforcementofvariousdiameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules. includingcutting,bending,hookingthebars,binding with wires or tack welding and supporting as required complete PWD DSR-2022-23, Item no. 26.33 12 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. PWD DSR-2022-23, Item no. 42.67 13 Providing and fixing C.P. Angular stop clock with wallflange of approved make continental including necessary sockets/union nut etc. complete PWD DSR-2022-23, Item no. 42.79 14 Providing and fixingC.P. BIBcockwithwall flange of approvedmake including necessary sockets/ union nut etc. complete PWD DSR-2022-23, Item no. 42.83 15 12mm flexible inlet pipe connectionPWD DSR-2022-23, Material of Building (Bd-V : Water supply and sanitory fittings), Page no. 534,Sr.no. 143 16 Providing, laying and fixingP.V.C. pipe of 75mmdia. with fittings such as bends, tees, reducers, clamps,etc. includingnecessaryexcavation, trenchfillingetc. complete. Includingremoving existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete PWD DSR-2022-23, Item no. 42.83 17 Mazdoor - Unskilled Heavy MalePWD DSR-2022-23, LABOUR RATES FOR SSR FOR YEAR 2022-23,Page no. 545,Sr.no. 36 18 Plumber With Tools - Skilled PWD DSR-2022-23, LABOUR RATES FOR SSR FOR YEAR 2022-23,Page no. 545,Sr.no. 07 19 Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps,etc. including necessary excavation, trenchfillingetc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. PWD DSR-2022-23, Item no. 42.27 20 Providingand fixingonwalls/ ceiling/ floor 15mmdia.CPVCpipewithnecessary fittings, remaking goodthe demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete PWD DSR-2022-23, Item no. 42.55 21 Providingand fixing inposition (as per 1868 / 1982) Alluminiumsliding window of three tracks with rectangular pipe 95x38.10x0.90mm at weight 0.637Kilogram/One Running Metre.with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/ One Running Metre..Top and side track section 92x 31.75x1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter lockingsection40 x18 x1.10 mm at weight0. 469Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by EngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchas rollerbearinginnyloncastingandself lockingcatchfittedinvertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nutsetc, complete. With colour Anodising with box PWD DSR-2022-23, Item no. 42.55 22 Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x60mm with 12mm thick three layered flat pressed teakwood particle board bonded with BWP type exterior gradephenol for maldehyde synthetic resinconforming to IS 128231990, laminated on both sides,No vateak or equivalent and 5mm thick selected quality plain/float glass panels fixed with aluminum glass clips 12mmx 12mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete PWD DSR-2022-23, Item no. 39.72 23 .Providingcoloured anodisingtreatment toaluminiumsectionsof thedoors ,windows, andventilators includingall theintermediatesupports , sidesupports, screwsandall the necessary fixtures with all leads, lifts, fixing charges etc. complete (Complete measurement on actual One Square Meterr basis of opening area shall be paid.PWD DSR-2022-23, Item no. 39.72 24 Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size0.90mx2.40m with aluminium door frame of powder coated section101.60x44.75mm, 3.18mm thickandshutter comprisingof powde rcoated section having bottom and lock rail of size 150mmx44.5mmx3.00mm thick top rails47.62x44.45mmx3.00mmthick,verticalstyle47.62x44.45mm,3.00mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. I.S.I.mark,heavyduty,Hydraulic floorspring of 150Kilogramcapacity , havingheavy duty concealed lock, necessary beading, glazingclips, PVCgaskets, 250mm length tower bolts,150mmdiam.padhandle,etc.as per detailed design and drawing or as directed by engineer in charge including all materials , labours, andequipment etc.CompletePWD DSR-2022-23, Item no. 39.64 25 Removing cement tiles, ormarble or polished shahabad floor or dadowithout bed concrete including stacking the materials as directed with all leads, lifts etc. complete. PWD DSR-2022-23, Item no. 46.19 26 Providing and laying vitrified matt fininsh tiles having size 590mm to 60 5mmx to 605 mmof 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approvedmake, shade and pattern for flooring in required position laid on a bed of 1:4 cement morarincludingneatcement float, filling joints,curing and cleaning etc. complete.PWD DSR-2022-23, Item no. 33.42 27 Providing and applying gypsum plaster (with Gypsum material )with finishing with gypsum material in10to13millimeter thickness to previously plastered surface/oron newly brick surface(Excluding rough cast plaster)in all position including preparing and Finishing the surface scaffolding etc.complete.PWD DSR-2022-23, Item no. 32.31 28 Providing Autoclaved Aerated Concrete Block masonary of conforming toIS:2185 (Part3)-1984in extra fine jointing mortarof fix oblock of UltraTech or equivalent in superstructure including strikingj oints, raking out joints and scaffoldingetc.Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)PWD DSR-2022-23, Item no. 27.15 29 Dismantling brickmasonry in lime or cement mortar and stacking thematerils as directed with all leads, lifts etc.PWD DSR-2022-23, Item no. 46.09 30 Removing any kind of debris including loading in truck and conveing day to day basis to approved dumping point etc complete with all lifts and lead of 52km (As directed by engineer in charges) as per PWD DSR-2015-16,page no. 195
