|
| 1 | Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. As per PWD DSR-2022-23, Item No-36.19 |
| 2 | Providing and applying two coat of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc. complete. As per PWD DSR-2022-23Item No-32.34 |
| 3 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. As per PWD DSR-2022-23, Item No-35.21 |
| 4 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.As per PWD DSR-202-21, Item No-36.13 |
| 5 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. As per PWD DSR 2022-2023 , item no 32.33 |
| 6 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. As per PWD DSR-2022-23, Item No-32.07 |
| 7 | Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. and applying sulphate and chloride free inorganic single component rust remover Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface shall become blackish non rusted colour. After 24 hours of application of rust remover, loose particles shall be removed by brush. Apply one more coat of Rusticide. After mixing polymer modified mortar, it can be trowel applied or sprayed. When applying by hand, polymer modified mortar must be forced tightly into the substrate to ensure complete contact with the substrate. (If scaffolding is required, same shall be provided and will be paid under relevant item) (15-30 mm thickness at a time).As per PWD DSR-2022-23, Item No-52.17 |
| 8 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc.complete. One side polish . As Per PWD SSR-2022-23, item no 33.37 |
| 9 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ OneSquare Metre as per drawing including fixtures, necessary welding and painting withone coats of anticorrosive paint and two coats of oil painting complete. As per PWD DSR-2022-23, Item No-40.01 |
| 10 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. As per PWD DSR 2022-2023 , item no 46.15 |
| 11 | Mazdoor - Unskilled Heavy Male As per PWD DSR 2022-2023 , Page no 545 , Sr no 36 |
| 12 | Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95x38.10x0.90mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92x31.75x1.30mm at weight 1.070 Kilogram/One Running Metre.Top and side track section 92x31.75x1.30mm at weight 0.933Kilogram/Running metre.The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417Kilogram/One Running Metre. Interlocking section 40x18x1.10mm at weight 0.469Kilogram/Running metre. and handle and top section 40x18x1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted invertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required. As per PWDSSR 2022-23, Item no. 39.41 |
| 13 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete As Per PWD DSR-2022-23, Item No- 46.19 |
| 14 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mmthickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern forflooring in required position laid on a bed of 1:4 cement morar including neat cement float, fillingjoints, curing and cleaning etc. complete As Per PWD DSR-2022-23, Item No- 33.42 |
| 15 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.As Per PWD DSR-2022-23, Item No- 33.43 |
| 16 | Removing any kind of debris including loading in truck and conveying day to day basis to approved dumping point etc complete with all lifts and lead of 52 Km ( As directed by Engineer in Charge) As per PWD DSR 2015-2016, Page No-195 |
| 17 | Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. As per PWD DSR-2022-23, Item No-39.82 |
| 18 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C.waste pipe and trap upto the out side face of the wall.Making good the damaged surface, testing etc. complete.As per PWD DSR-2022-23, Item No-41.63 |
| 19 | Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. As per PWD DSR2022-2023 , item no 42.8 |
| 20 | PVC Aqua kraft type super jet spray 15 mm. As per PWD DSR2022-23. Page no-539 Sr.no. - 390 |
| 21 | 12mm flexible inlet pipe connection As per PWD DSR 2022-2023 , page no -534 item no -143 |
| 22 | Plumber With Tools - Skilled As per PWD DSR 2022-2023 , page no 545/ Sr No. 07 |
| 23 | P.V.C Flushing tank (12 lit capacity )As per PWD DSR 2022-2023 , page no 535/ Sr No. 202 |
| 24 | Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. As per PWD DSR2022-2023 , item no 42.83 |
| 25 | Providing and fixing 50mm diameter and 1.5 mm thick vertical and top Stainless steel hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 mm x32mm x1.5 mm in 3 rows including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete As per PWD DSR 2022-2023 , item no 51.111 |
| 26 | Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. As per PWD DSR-2022-23, Item No- 39.06 |
| 27 | Providing and fixing1.5mm thick poly venyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete. As per PWD DSR-2022-23, Item No- 33.39 |
| 28 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. As per PWD DSR-2022-23, Item No- 35.07 |
| 29 | Replacement of damaged alluminium Butt Hinges of 125mm of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc.complete as per sample approved by Engineer incharge.As per PWD DSR-2022-23, Item No- 46.46 |
| 30 | Replacement of damaged Aldrop300mm Chromium plated of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge.As per PWD DSR-2022-23, Item No- 46.48 |
| 31 | Mirror 40*50cm. With plastic frame. As per PWD DSR 2022-2023 , page no 534/ Sr No. 135 |
