Tender For Development Of Green Waste Management Centre At Silver Oak Park Jangpura Ward No. 145, Central Zone., vihar-Delhi

Tender For Development Of Green Waste Management Centre At Silver Oak Park Jangpura Ward No. 145, Central Zone.; 1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer10.26.3 G.I. Pipes 2 Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire ornuts, bolts and washers as required complete as per the direction of Engineer-in-charge 16.70.1 Made of G.I. wire of dia 4 mm 3 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge2.6.1 All kinds of soil 4 Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size) 5 Manufacturing, supplying and fixing retro reflective sign boards madeup of 2 mm thick aluminium sheet, face to be fully covered with highintensity encapsulated type heat activated retro reflective sheetingconforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual),symbols and borders etc. as per IRC ; 67:2001, pasted onsubstrate by an adhesive backing which shall be activated by applyingheat and pressure conforming to class -2 of ASTM-D-4956-01 andfixing the same with suitable sized aluminium alloy rivets @ 20 cmc/c to back support frame of M.S. angle iron of size 25x25x3 mmalong with theft resistant measures, mounted and fixed with 2 Nos.M.S. angles of size 35x35x5 mm to a vertical post made up to M.S.Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes inpipes, angles flats, providing & fixing M.S. message plate of requiredsize, steel work to be painted with two or more coats of syntheticenamel paint of required shade and of approved brand & manufactureover priming coat of zinc chromate yellow primer (vertical MS-Teesupport to be painted in black and white colours).Backside ofaluminium sheet to be painted with two or more coats of epoxy paintover and including appropriate priming coat including all leads andlifts etc. complete as per drawing , specification and direction ofEngineer-in-charge.16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametrewith support length of 3750 mm 6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge18.9.5 40 mm nominal outer dia Pipes 7 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 8.17.3 40 mm nominal bore 8 Supply of agro Shade Net with density 50% dimension 3 mtr width 50mtr length colour green and black as per direction of officer- in charge. 9 Supply of decomposing bacterial culture for composting in good quality. 10 Rain gun staineds: Anastain Jaguar water gun- aluminum alloy body and ARM, gun metal hex nutt and inlet jeckt and plastic nozal 11 Tryport stand : 1-1/2” rain gun stained: 1-1/2” with GI riser 1-1/2” x4 fit. 12 Supply of 1” PVC Pipe with nylone braided in good quality as per direction of officer-in- charge. 13 Supply of safety glass (Chashma)in good quality 14 Supply of Safety Boots Standard: IS 12254 should be ideal for working in forest are and sole make in polyvinyl chloride, resistant to mild acid/alkalineSupply of Safety Boots Standard: IS 12254 should be ideal for working in forest are and sole make in polyvinyl chloride, resistant to mild acid/alkalineSupply of Safety Boots Standard: IS 12254 should be ideal for working in forest are and sole make in polyvinyl chloride, resistant to mild acid/alkaline 15 Supply of Hand Gloves: Puc dotted gloves seamless polyester cotton 16 Supply of safety Helmet Standard: IS 2925 CN 397 light weight polyethylene HDPE ABS Made.

INR 1180 /-

INR 14.79 Lakhs /-