Tender For Special Repair To Jco Living Bldg No E-119 At 43 Fd Regt Under Age B/R-Iv And Age E/M-Ii Of Ge (South) Meerut Cantt.; 1 Demolition ofbrick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc complete all as specified and directed. 2 M&L brick work with sub class B Bricks old Size straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed. 3 M&L brickwork with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed. 4 Dismantling timber scantlings 40 sq. cm and over in section as in framed work, in any position as in roof truss and Purlins complete all as specified and directed. 5 S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed. 6 Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering complete all as specified and directed. 7 Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed. 8 Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed. 9 S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified and directed. 10 Dismantling ceiling board of insulation boards etc any thickness complete all as specified and directed. 11 Material & labour for provision of Powder Coated GI frame work(snap grid) suitable for size as in false ceiling of size 600mmx600mm consisting of followings andall as directed:-i) sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of GI anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively.iii) Snap grid frame shall be fixed to ceiling withsupporting hangers consisting of S & F 2mm dia mild steel GI wire.iv) The main and cross tees shall be jointed at junction/crossings with GI anodized angle bracket, of size 15mmx15mmx1.4mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions.v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 mm anodizedthick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron. Complete all as specified and directed. 12 S&F 4 mm thick Gypsum Board in ceilingsize 60cm x 60cm fixed to aluminium snap gird completeas per manufcturers instructions complete all as specified and directed. 13 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. 14 S&FVitrified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement over & including 15mm screed bed in CM 1:6 complete all as specified and directed. 15 S&FVitrified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or colouredcement over & including 15mm thick rendering in CM 1:4 complete all as specified and directed. 16 S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM(1:4)joint free with grout of matching shade complete all as specified and directed. 17 M&L Non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor colour cemnt to match over & including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. 18 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed. 19 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified and directed. 20 Material & Labour For Powder coated anodised aluminium Door Shutter without sash bar, aluminium section weighing 0.55 kg/Mtr (minimum) including necessary joining cleats, 02 Nos Handles, Locking Arrangement , Glazing clips, rubber packing anodised aluminum snap beading, screws suitable anodised aluminium frame with one or more rebates including 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed. 21 S&F powder coated anodised aluminium windows slidingtype (3 shutter type)/ Side hung type as per site requirement or directed by engr-in-chargewith sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including 5.50 mm thick black glass complete all as specified and directed. 22 S&F powder coated anodised aluminium Ventilators Side or top or bottom hung type as per site requirement with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame,with one or more rebates including 5.50 mm thick tinted pin headed glass complete all as specified and directed. 23 M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde-165 complete all as specified and directed. 24 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 25 M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 26 M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out usingextra cement complete all as specified & directed. 27 Materials & labour for prepration of newely plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. 28 Materials & labour for prepration of Old plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. 29 M &L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applyingAcrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified & directed. 30 M& L Preparation of old plastered surface of wall including complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of Acrylic smooth exterior paint of required shade ( two coat @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) using roller for painting complete all as specified & directed. 31 M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel Paint over one coat of Red oxide primer complete all as specified and directed. 32 Demolition of cement concrete of ground floor n exc 15 cm in depthin any position nototherwise specifically provided for, complete all as specified and directed. 33 M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed. 34 M & L For Granite (of any type) tiles 15 to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types over and including Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying granite finish Complete including dismantling of old existing floor complete all as specified and directed. 35 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. 36 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. 37 S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed. 38 S&F aluminium anodized handle of size 150 mm, ISI marked, complete all as specified and directed. 39 S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. 40 S&F in repair 15 mm dia stop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with fancy typescrewed both ends for iron or for union complete all as specified and directed. 41 Supply & fix in repair vitrous china wash down water closet pan ( padestal pattern) with and including white ( excluding fixing bolts, flushing cistern)white plastic seat cover for WC ( E.T ) white including MS CP or aluminium hinging device complete all as specified and directed. 42 S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. 43 S & F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed. 44 Supply and fixing PVC Heavy Duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed 45 S&F in repair 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. 46 Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 47 S&F in repaircromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 48 Supply & fix in repair pillar taps, fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore,complete all as specified & directed. 49 S&F in repair 15 mm dia Fancy type long body conceledstop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with fancy typescrewed both ends for iron or for union complete all as specified and directed. 50 S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed. 51 S&F in repair CP brass soap dish complete all as specified and directed. 52 S&F in repair 600mmx750mm fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 53 S&F in repair chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed. 54 S&f in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 55 S&F in repair fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. 56 Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed. 57 S&F triple layer of any colour 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified and directed. 58 S & F Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe complete all as specified and directed. 59 Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing completeincluding taking down of old GI tubes of any grade complete all as specified and directed. 60 Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete including taking down of old GI tubes of any grade complete all as specified and directed. 61 S&Fin repair gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 15 mm pipe complete all as specified and directed. 62 S&F in repair gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe complete all as specified and directed. 63 Supply and fixin repairs 75mm bore PVCPipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in wastecomplete all as specified & directed. 64 Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed 65 S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. 66 Excavation and getting out of sludgefrom septic tank and soak well OrManholes in any depth by any means and removing to the distance up to 3 kms out side cantt area and deposited in approved lying areas complete all as specified and directed. 67 Material & labour salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150 mm including demoiltion of pipe complete all as specified and directed. 68 M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) for 150 mm dia pipe work in foul position complete all as specified and directed. 69 M & L PCC 1:3:6 type C-2 ( using 40mm Graded aggregate) as in surface channel or drains complete all as specified and directed. 70 Demolition of reinforced cement concrete in grounf floor n exc 15 cm thick( reinforcement cut to faciliatate demolition) complete all as specified and directed. 71 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed. 72 M & L RCC (nominal mix) 1:2:4 Type B1 ( Using 20 mm graded stone Aggregate ) in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 73 S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape requiredincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including MSwire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. 74 Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. 75 M&L for laying 60 mm thick machine pressedprecast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. 76 M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick Complete all as specified and directed. 77 M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base Complete all as specified and directed. 78 Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. 79 Material & labour forpoint wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSPVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or throughwalls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for Onelight point / bellpoint controlled by one, one way switch 05 / 06 Amps. 80 All as per item No 79.00 here-in-before but One fan point controlled by one, one way switch 05 / 06 Amps. 81 All as per item No 79.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. 82 All as per item No 79.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. 83 All as per item No 79.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. 84 Supply and fixswitch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed. 85 Supply and fix socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed. 86 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed. 87 Supply and fix LED lamp 9/10 watt. complete all as specified and directed. 88 Supply and fix in repairdecorative LED Tube lightfitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material complete all as specified and directed. 89 Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lensin frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed. 90 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed. 91 Supply and fixing in repair vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison forfixing of 1 No MCCB of XT1160 frame suitableupto 160 Amp and 12 Nos MCBS inside of DB,including 100 Amps ,18 KA 4 pole MCCBwith metal door and flush to wall including grouting and cutting in existingwall and making good disturbed surfacewith two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed. 92 Supply and fixing in repair MCB, SP, AC, 240 volts B series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed. 93 Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, B series capacity32 Amps to 40 Amps10kA and making connections complete all as specified and directed. 94 Taking down unsv cable ofany type/size and S&F (in repair) , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. 95 Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. 96 Excavationin trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft/ loose soil and gating out in soft / loose soil complete all as specified and directed. 97 M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified and directed. 98 Material and labour for contineous brick of flyash designation 75kg/cm2complete all as specified and directed. 99 Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. 100 Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. 101 Supply and fixing ceiling fans complete with blades, down rods, step type electronic regulator compitable for BLDC fan and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old ceiling fans & deposited to AGE E/M-II store yard complete all as specifieda and directed. 102 Taking down old unserviceable distribution board of any type/size and S&F fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed. 103 Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingincluding taking down the old unserviceable submain wiring of ant type complete all as specified & directed.Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length. 104 Supply, install and testing of water heater vertical storage type capacity 25 ltr, 2 KW having stainless steel inner vessal with glass enamlled coating, five star rating, closed/vented type 240 volt glass coated heating element complete with all accessories, including fixing arrangement with suitable size of fastner, nuts, bolt and washer etc making good to distrubed wall surfaces to match with existing including taking down old exist water heater & deposit to AGE E/M-II store yardcomplete all as specified and directed. 105 Supply and fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match with existing disturbed surfaces complete all as specified and directed. 106 Material and labour for inserting GI TEE 15 mm dia BIS/ISI make heavy duty including in existing GI pipe 15 mm diaand making good the distubed surfaces to match the existing complete all as specified and directed. 107 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep heavy duty with, blades, and frame and louvers including taking down old exhaust fan & deposited to AGE E/M-II store yared complete all as specified and directed. 108 Supply and fix desert cooler height made of GI sheet with heavy duty single phase motor,honey comb pads,copper wire wounded 400 mm sweep, tank capacity 90 Litre speed-1400 RPM or more, cooler power consumption not more than 160 watt , sheet thicknessfor filter panel, grill, top cooler body should not less than 0.8mm sump tank thickness (nominal)should not less than 1.00mm, with wood wool cooling pad including provision of brassfloat valve 15 mm dia and connecting with and including PTMT PVC connection including taking down old cooler & deposited to AGE E/M-II store yard complete all as specified and directed.
