Tender For Encloser Prey Base, Mokela Range Gogunda - 1 Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil 2 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary rock 3 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 4 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 5 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 6 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Columns, pillars, posts and struts etc. 7 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick . 8 Structural Steel work in buildup sections ,trusses and framed work including cutting ,hoisting ,fixing in position and applying a Priming coat of approved steel primer all complete : In flats, tees.angles & Channals angle size 65X65X8mm 9 Supply of Galvanized chainlink fencing sige 50X50 X3.15 mm 10 Structural Steel work in buildup sections , trusses and framed work including cutting , hoisting ,fixing in position and applying a Priming coat of approved steel primer all complete: Angles fixing on chainlink fenching at top angle size 50X50X5 mm 11 Structural Steel work in buildup sections ,trusses and framed work including cutting ,hoisting ,fixing in position and applying a Priming coat of approved steel primer all completeAngles fixing on chainlink fenching at middle angle size45X45X5 mm 12 Structural Steel work in single section fixed without connection plateincluding cutting ,hoisting ,fixing in position and applying a Priming coat of approved steel primer all completePatti fixing on chainlink fenching Patti size 25X3mm 13 Structural Steel work in buildup sections ,trusses and framed work including cutting ,hoisting ,fixing in position and applying a Priming coat of approved steel primer all complete Angles fixing for support on both side (0.30+0.30=0.60) angle size 35X35X3mm 14 Providing & fixing steel gate grating and grills made of angles, tees, square bars or flats black pipe with holdfast and fitting complete as per design and drawing including cutting ,hoisting ,fixing in position and applying a Priming coat of red oxide 15 Providing and fixing concertina coilfencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra) 16 Instaltion of angle and fabrication in RCC work in propare line & level etc complete in all respect . 17 PurchangeISI marks nuts ,washer & bolts etc. fixing for chainlink fenching all Complete. 18 Fixing chainlink fenching withG.I. ISImark nuts, washer,huke & bolts complete. 19 Excavating trenches of required width for pipe cables, etc.including excavation for sockets, and dressing of sides,ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating Each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr.: Allkinds of soil 20 HDPE Pipesupply including all fittings, this included jointing of pipes & fittings asper direction of Engineer in Charge.50 mm dia ( Non B.S.R. Item ) 21 Providing & fixing steel gate grating and grills made of angles, tees, square bars or flats black pipe with holdfast and fitting complete as per design and drawing including cutting ,hoisting ,fixing in position and applying a Priming coat of red oxideM.S. Jalli for pipe : Angle size 50X50X6 mm 22 Angle size 50X50X6 mm 23 Pati size 50X5 mm 24 :Round plain Bar size 20 mm Dia 25 Total (A+B+C) 26 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary rock 27 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 28 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). 29 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 30 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . 31 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary rock 32 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 33 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 34 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick.20mm thick . 35 Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : 600 mm dia Internal
