Tender For Addn/Altn Of Bldg No 9013/124/05/06 Tb Opw In Swc Int Bn At Jaipur Mil Stn; 1 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting outin soft / loose soil complete all as specified and directed. 2 M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. Note:- Punned thickness of sand shall be measured and paid. 3 M&L for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 4 M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 5 M&L brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 6 M&L brick work using old size bricks with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 7 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified & directed. 8 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. 9 Taking down chowkats or frames n.exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) and removing to or from store complete all as specified and directed. 10 Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 sqm each with shutters ( with out taking off shutters from the frames) and removing to or from store complete all as specified and directed. 11 S&F 35 mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. This size of rails & style as specified in SSR Part-In (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as peer IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note:- S&F glass/gauge shall be measured and paid for separately. 12 S&F aluminium, anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed. 13 S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed. 14 S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed. 15 S&F Mortice lock, vertical type, size 100 mm, 4- lever mild steel body with two keys complete all as specified and directed. 16 S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. 17 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 18 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed. 19 S & F auto close hinges, stainless steel, bright finish or electrogalvanisedfixed complete all as specified and as directed. 20 S&F stainless steel (SS) tower bolts, fancy type, of size150 mm long complete all as specified and directed. 21 M&L for cupboard magnet, stainless steel, bright finish or electro-galvanised of size 55 x 29mm complete all as specified and directed . 22 M&L for cupboard lock, stainless steel, bright finish or electro-galvanised of size 64mm complete all as specified and directed . 23 S&F stainless steel handles, fancy type, of 100 mm size complete all as specified and directed. 24 S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work conforming toFe -290 Gde E-165 complete all as specified and directed. 25 S&F rolled mild steel section in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. 26 S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size,floor door stopper of size 200mm etc. using medium weight, aluminium section as follow :- (a) Frame (top & side) section shall of size 101.60x 44.75 x 2.4 mm (Section 14021)(b) Vertical Members of shutter section shall be of size 85.00 x 44.45 x 2.00 mm (Section No 19560).(c) Top members of shutter section shall be of size 83.50 x 44.45 x 2.00 mm (19581).(d) Lock rail (Middle member) of shutter section shall be of size 150 x 44.4 x 3.00 mm (Section No 19596)(e) Bottom Members of shutter section shall be of size 150.00 x 44.45 x 3.10 mm (Section No 19584)Note:- Section given above are of Make Jindal, the contractor may use similar section ofother make as mentioned in Appx B of PS. 27 Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (Section 20831)(b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832).(c) Top members of shutter section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20738).(d) Shutter Interlock section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20737)(e) Bottom Members of shutter section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20736)Note:- Section given above are of Make Jindal, the contractor may use similar section of other make as mentioned in Appx B of PS. 28 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 29 M&L Providing & fixing false ceiling at all heights with semi perforated 12 mm thick micro tegular edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 4x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, and direction of engineer-in-charge complete all as specified and directed. 30 M&L for 18-20 mm thick High Density high moisture resistant (HDHMR) board for kitchen cupboard / door shutter of Action tesa / Pearlwood or equivalent make as approved by GE, one side colour / white laminate and other side decorative as in modular kitchen / cabinets / door shutter fixed with minifix hardware wherever required including edge band 22mm wide, 0.80m thick of matching colour on exposed surfaces of board fixed with polymaster adhesive of REHAU make or equivalent including trimming edges of edge band to true line of thickness of board by manual trimmer, fixed to wall etc. complete all as specified and directed. 31 M&L for machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing on treads of step and landing of stair including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. 32 M&L for machine cut kota stone slab mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) in riser of step ,skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing including rendering 10 mm thick in CM 1:4 complete all as specified and directed. 33 M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even andsmooth with using extra cement complete all as specified and directed. 34 M&L for glazed ceramic coloured tiles in vertical surface350x 250x 7 mm / 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. 35 M&L for non skid ceramic coloured tiles of design as approved7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. 36 M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. 37 M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. 38 S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement andpigment complete all as specified and directed. 39 Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed. 40 M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smoothwith out using extra cement complete all as specified and directed. 41 M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed 42 M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper (OBD) over a coat of alkali resistant priming paint complete all as specified and directed. 43 M&L for preparation of old plastered surfaces of walls and applying two coat of oil bound distemper (OBD) complete all as specified and directed. 44 M&L for preparation of new surface of walls of any description with a coat of wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed. 45 S&F 3 mm thicksheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. 46 M&L for preparation of old surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed. 47 M&L for preparationof new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 48 S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed. 49 S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed. 50 Taking up or down steel tubing and connections including cleaning if refixingrequired for 15 mm bore of pipe complete all as specified and directed. 51 Taking up or down steel tubing and connections including cleaning if refixingrequired for 20 mm bore of pipe complete all as specified and directed. 52 S & Frotational moulded polyethylenewater storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in positioncomplete all as specified and directed 53 S&F in repair bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrulefancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. Make : Jaquar / Hindware / Cera or equivalent as approved by GE. 54 M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe withcement concrete 1:3:6 type C-2 using 40mm graded stone aggregatecomplete all as specified and directed. 55 S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. 56 M&L for construction of 380mm thick stone masonry soakage wells of size 1.2 m dia x 3.0 m effective depth complete all as specified and shown in Drawing No. - CEJZ/2004/TD/S-35 Sheet No 1/1, attached as appendix D including excavation and earth work in soft/loose soil, all RCC, PCC, cement, masonry work, pipe & fitting etc. complete all as specified and directed.Note:- The drawing shall be read in conjunction with this items and the rate quoted by contractor shall deemed to be included for the same. 57 M&L in repair for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors of 150 mm bore of pipe etc complete all as specified and directed. 58 M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed. Note:- Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately. 59 S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. 60 Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. 61 M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuity conductor FRLS cable 1100 V grade as continuous earth wire for one light / fan / bell point controlled by one, one way switch.Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3shall deemed to be included in quoted rate. 62 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5Sqmm (Green), PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3pin socket outlet 5Amps on the same board with other switches, complete all as specified and as directed. 63 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5Sqmm (Green), PVC casing-capping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 pin 5Amps socket outlet on independent board, complete all as specified and directed.Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. 64 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0Sqmm (Green), in PVC casing & caping, not less than 25mm x 15mm, ISI marked ivory colour with all fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15Amps socket outlet on independent board, complete all as specified and directed.Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. 65 M&L lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. 66 S&F Modular Switch one way6 A, 1 module complete all as specified and directed. 67 S&F modular switch 1 way 16A, 1 module complete all as specified and directed. 68 S&F modular Socket, 6A - 2/3 pin combined, 2 module complete all as specified and directed. 69 S&F modular socket6A/16A - 2/3 pin combined 2 module complete all as specified and directed. 70 S&F Fan step regulator, 120W - 2 module complete all as specified and directed. 71 S&F in repair sheet metal enclosure factory fabricated for MCB distribution board TPN double door type concealed in wall 415 volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed. 72 S&F ceiling rose 3 phase, PVC / polycarbonate, isolated bodycomplete all as specified and directed. 73 S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. 74 S&F amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of SPN and 40 to 63 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed. 75 S&F amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of Single Pole and 06 to 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed. 76 S&F LED fixtures 20 Watt with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w, driver with high voltage protection upto 380 V AC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology complete all as specified and directed.Make : Havells Cat Part No. LHEXARP7IN1W020-Pk2 or equivalent make of Wipro / Crompton / Philips as approved by GE. 77 S&F amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of Double Pole and 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed. 78 S&F T-Bulb, 10 Watt B22 LED (warm white / yellow) not less than 1000 lumen complete all as specified and directed.Make : Philips Cat Part No. 929001382713 or equivalent make of Wipro / Crompton / Havells as approved by GE. 79 Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 80 Dismantling of stone slabs of any description or thickness, laid bedded and pointed in any mortar in floor, apron etc complete all as specified and directed 81 Dismantling of AC corrugated / semi corrugated or translucent sheet as in roof coverings complete all as specified and directed.
