Tender For Special Repairs To North Wing Of Dsc Line Building No P-163 At Naval Base Kochi; 1 Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed. 2 All as item No.1 above but exc 1.50 Sqm and n.exc 4.00 Sqm each. 3 S&F second class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. 4 S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. 5 M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed. 6 S & F 35mm thick IInd Class hard wood rail and stiles Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated as completed as specified. 7 M&L 30mm thick second class hardwood glazed and skeleton shutters , open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed. 8 S&F mild steel framed work as in door,chowkat,grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed. 9 S&FSolid PVC door frameof size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed. 10 S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, S&F in frame at site as per specification & drawing all as specified. 11 S&Fpowder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 12 S&Fpowder coatedaluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified 13 S&Fpowder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified 14 S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed. 15 S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples 16 S/F 100 mm long mild steel butt hinges medium weight 17 S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed. 18 S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. 19 S&F aluminum bow handle D type anodized 150mm long complete all as specified and directed. 20 S&F in repair MS helical door spring 300mm long including roller and roller plate complete all as specified and directed. 21 S& F 20mm dia stainless steel curtain rod complete all as specified and directed. 22 S & F 20 mm dia Stainless steel curtain rod bracket with knobs complete all as specified. 23 Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. 24 M&L for precast cement concrete block masonry in type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed. 25 Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. 26 M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. 27 M&l for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as directed. Note: Water proofing compound shall be paid separately. 28 M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. 29 Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge. 30 Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge. 31 M&L 75mm thick PCC (1:3:6) type C-2 (Using 20mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. 32 Dismaintaing wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair. 33 M&L for Glazed ceramic coloured joint free tiles 450x300X7mm/600x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge 34 M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors over cement screed 15 mm thick in CM 1:4set andjointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 4mm thick spacer width complete all as specified and directed by Engr -in-charge. 35 M&L for Light shade Virified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc.over 15mm thick screed bed of CM 1:6 set andjointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 4mm thick spacer width complete all as specified and directed by Engr -in-charge. (Cost of Epoxy is inclusive of quoted rate) 36 M&L for Light shade Virified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surfaceover 10mm thick rendering in Cement mortar (1:4) set andjointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 4mm thick spacer width complete all as specified and directed by Engr -in-charge. (Cost of Epoxy is inclusive of quoted rate) 37 M&L for Machine cut Kota stone slab 18-20mm thick as infloor/ treads ofsteps (single piece) laid over and including 15mm thickscreed in CM 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed by Engr-in-Charge. 38 M&L for machine cutKota stone slab 18-20 mm thick (single piece) as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:3, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed by Engr-in-Charge. 39 Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finishcomplete. 40 M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge. 41 M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor for levelling of floor as required portion complete all as specified and directed by Engr-in-Charge. 42 M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed by Engr-in-Charge. 43 M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty and one coat of alkali resistant primerto newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge. 44 M & L for preparation of new plastered external wall surface and applying two coats of weather proof (Apex Ultima protek) paint over a base coat of primer complete all as specified and as directed by the Engineer-In-Charge. 45 M&L for preparation of old ceiling surface and One coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge. 46 M&L Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a base coat of suitable primercomplete all as specified and as directed by the Engineer-In-Charge.Note:- Application of paint, primer shall be as per manufacturers instruction. 47 M&L for preparation and complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of 1.5 mm thick wall care putty and one coat of alkali resistant primer complete all as specified and directed.Note:- Application of paint, primer and wall care putty shall be as per manufacturers instruction. 48 M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 49 All as per item No.48 above but two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all as specified and directed. 50 S&F in repair PVCflushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed. 51 S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket includingwaste coupling and 32mm PVC waste pipe complete all as specified and directed. 52 Supply and fix 15mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 53 S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed. 54 S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed. 55 S&F 600x450mm looking mirror of selected quality glass mounted on 6mm thick of commercial plywood and PVC moulding frame fancy type complete all as specified and directed. 56 S&F looking mirror of selected quality glass 4.8mm thick fixed with CP Bracket complete all as specified and directed. 57 S&F in repair brass CP towel Rail 600mm long D type complete all as specified and directed. 58 S&F in repair Stainless steel soap dish fixed to wall with screw complete all as specified and directed. 59 S&F in repairSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail 60 S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe. 61 Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level). 62 M & L for plain cement concrete Nominal mix (1:5:10) type E2(using 40 mm graded brick aggregate) as in sunken floor. 63 M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified 64 Taking down of existing roof treatment consisting of screed bed plaster tar felts etc and removal of dismantled materials complete all as specified and directed by Engr in Charge. 65 M&L for Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) for coping or chamfered on edges and. levelling coarses of concrete in roof slab all as specified and as directed. 66 Providing and applying pitch free polyethene water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface at 1.5mm thick in 2 coats with interval period of 6 hours over a substrate at coverage rate of 2Kg/Sqm using spray/squeege/ roller/ brush. Water proofing coating shall have the elongation of 200% (ASTM D412-90, Tear resistance of >7N (ASTM D 624-00), and tensile strength of 1.5N/mm2 (ASTM D412-90) and it should have a solid content of 80-85% (The rate includes the application of the chemical with specialized agency or the manufacturer) 67 M & L for 10mm thick rendering in CM ( 1 : 3 ) mixed with water proofing compound on fair faces of brick walls or conc surfaces and finished even & fair complete all as specified.(Note : water proofing compound paid separately) 68 Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing. 69 Dismantling wrought iron or mild steel work of any description complete all as specified 70 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets. 71 S&F for pre-painted galvalume zinccoatingGI based corrugated steel sheet 0.50 mm thickof any colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. 72 S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed. 73 S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240. 74 S & F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified 75 S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified. 76 S & F 12mm thick Seamless calcium silicate ceiling madeout of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed tothe ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified. 77 M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty to newlyceiling surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge. 78 Excavation in trenches n.exc 1.5m and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil. 79 Removing excavated soil exc.250m but n.exc 500m and depositing where directed by Engr-in -charge. 80 Returning filling in soft/loose soil including spreading leveling watering and wall ramming in layers n/exc 25 cm thick all as spd and directed 81 M&L for precast cement concrete block masonry in type C1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed. 82 M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggrigate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified 83 Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLShooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality Aor Fe-290 (Gde E-165) complete all as specified and directed 84 M&L for cement concrete type C1 1:2:4 using 20 mm graded aggregate as in copingincluding use & waste of formwork etc complete all as specified and directed 85 M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. 86 S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge. 87 S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge. 88 S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed by Engr-in-Charge. 89 S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge. 90 S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed by Engr-in-Charge. 91 M&L for hume pipe septic tank 25 users capacity incl AC vent pipe, earth work excavation in soft/loose soil, erectinghume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete and provide new connections to the new septic tank 92 M & L for Cement concrete in surface channels and drains in PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed 93 M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 using 40mm graded stone aggregate complete all as specified and directed 94 S&F in replacement on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia including taking down old one complete all as specified and directed.Make- Supreme/ Eurotech/Astral/ SFMC 95 All as per item No. 94 here-in-before but of size 20 mm dia 96 All as per item No. 94 here-in-before but of size 16 mm dia 97 S&F in replacement of bib tap Chromium plated (CP), half tum with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge.Make- Cera Cat Part No. F2004152 or any other make in the approved manufactures list 98 S&F in replacement concealed stop cock regular body, half turn with flange chromium plated CP cup E fancy type of size 20mm and taking down old one, complete all as specified and as directed by the Engineer-in-charge.Make- Cera Model No. F2004351 & F4050502 or any other make in theapproved manufactures list 99 S&F 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge. Make- Cera Model No. F2013201 or any other make in the approved manufactures list 100 S&F in replacement of Overhead Shower 100X100mm Square Shape single flow (Face plate stainless steel & ABS Body in Chrome plated finish) with Rubit Cleaning System fancy type for fixing with CPVC pipe and taking down old one, complete specified.Make Cera Cat Part No. F7020108AB or any other make in the approved manufactures list 101 S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm Gl pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge. 102 S&F in replacement health faucet ABS body with 8mm dia, 1.5 meter long spirochrome flex tube & wall hook, including taking out old one all as per specified. Make- Cera Model No. F8030107AB or any other make in the approved manufactures list 103 S&F in replacement pillar taps, half turn with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified and directed by the Engineer-in-charge.Make- Cera Cat Part No. F1003104 or any other make in the approved manufactures list 104 S&F CP Flush Valve regular 32mm size (Concealed Body) with Exposed Shut off provision & round flange connection pipe for urinal posts to fixed in 15/20 mm pipe complete all as specified.Make Cera Cat Part No. F8010108 or any other make in the approved manufactures list 105 Taking down carefully existig copper/alumn point wiring for light/fan/bell/socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens/conduits / wires, T/L fittings and making good the disturbed surfaces of walls and roofs etc and to match with existing colour complete all as specified and directed. 106 Taking down carefully unserviceable main switches and distribution boards with fuses/ MCBs (single phase or three phase) of any capacity all as specified and directed 107 Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified 108 S&F point wiring with 1.5 Sqmm PVC insulated sheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/roof except beam, column and RCC roof including chases cutting as reqquired working spot and surface on as existing incl suitable size/ cap of sunken box for moduler switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light/ wall fan point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. Note- Bldg height/ working spot is more than 7.5 mtrs, rate to be quoted by fired/contractor with tools & plant/ transportation 109 All as per item No. 108 above for one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board 110 All as per item No. 108 above for one 3 pin 5 Amp socket outlet point controlled by one switch on same board 111 All as per item No. 108 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, sheated copper conductor on independent board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, sheathed stranded copper conductor cable. 112 All as per item No. 108 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, sheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, sheathed, stranded copper conductor cable. 113 M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.Make Legrand Cat Part No. 5734 00 or Schneider/ Siemens 114 M&L Switch modular type 16/20 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.Make: Legrand Cat Part No. 5734 10 or Schneider/ Siemens 115 S&F Socket outlet modular type 6A-2 in 1, with shutter, 2 module, duly ISI marked, complete all as specified and directed.Make Legrand Cat Part No. 5734 24 or Schneider/ Siemens 116 S&F Socket outlet modulai lyps 6:15A, 3 pin combined, 2 module, dury ISI markad, complete all as specified and directedMake Legrand Cat Part N. 5734 71 or Schneider/ Siemens 117 M&L Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate white in colour, bakelite 65 x 50mm, 3 terminals duly 15 marked complete all as specified and directed 118 S&F rotary Stepped type elzctronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI markeri complete ail as specified and directed. Make Legrand Cat Part No. 5734 63 or Schneider/ Siemens 119 Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light conrecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeMake Philips Cat Part No. BN100C LED40S-6500 PSU L120 GR S4 or Havells/ Crompton 120 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete.Make: Philips Cat Part No. BRP030 P LED35 CW SLR GR PSU SPD or Havells/ Crompton 121 S&F LED luminaire 600mm x 600mm, 36W, 240 Volts, single phase recessed type with high efficiency PMMA diffuse soft glare light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor of size 23/00.0076 all as specified and directed.Make Philips Cat part no RC380B LED36S-6500 G6 L60W60 PSU OD S1 or Havells/Crompton 122 S&F LED bed side farro of 3 Watt, min 100 Lumen/watt, 240 Volts, single phase, holder type with metal body including fixtures and connecting accessories complete all as specified and as directed by Engr-in-Charge.Make Philips Cat Part No. 480-42 or Havells/ Crompton 123 S&F LED Spot/ COB light fitting of 12/ 15 W. warm white, 240 Volts, single phase, conceled type complete with driver suitable for roof ceiling/ wall including connecting up with driver three core flexible copper conductor of size 23/00.0076 all as specified and directedMake- Philips Cat Part No. RS262B LED15S/865 PSU MB WH or Havells/Crompton 124 S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and wasners, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specifiedNote- Old Ceiling fans to be deposite at AGE E/M (NW) store yard.Make Havells Cat Part No. Turbo Force SP or Orient/ Crompton 125 S&F ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Note-Old Ceiling fans to be deposite at AGE E/M (NW) store yard.Make Orient Model Ecotech Neu BLDC 5 star / Crompton Cat Part No. Energion Groove/ Usha Cat Part No. Energia 32 126 S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incorning and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V. 50Hz supply, VTPN DB, IP-43 protection, partly immersed in wall, without MCCB and MCBs including making good distrubbed surfaces with matching colour, complete all as specifiedMake-Legrand Cat Part No. 5078 85 or Schneider/ Siemens 127 S&F in replacement of Factory made sheet metal enclosures for DBs when MCBs to be used single phase and neutral, double door distribution board 12 way, bus bar of capacity 200 Amps, suitable for use on 240VMake: Legrand Cat Part No. 5076 02 or Schneider/ Siemens 128 S&F in replacement of Factory made sheet metal enclosures for DBs when MCBs to be used single phase and neutral, double door distribution board 4 way, bus bar of capacity 200 Amps, suitable for use on 240VMake: Legrand Cat Part No. 5076 00 or Schneider/ Siemens 129 S&F MCB SPN, 40A-63Amps, 240 volts, C series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.Make Legrand Cat Part No. 4086 18 to 4086 20 130 S&F MCB SP, 6A-32 Amps, 240 volts, C series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.Make Legrand Cat Part No. 4085 87 to 4085 95 or Schneider/ Siemens 131 S&F in replacement of double pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole and neutral MCB 20 Amps, 240 Volts 132 28 M&L wiring for circuit/ Sub main wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ recessed required.2x10 Sqmm + 1x10 Sqmm earth wire. Note: Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length. 133 M&L wiring for circuit/ Sub main wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ recessed required. 2x6 Sqmm+1x6 Sqmm earth wire. Note: Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length 134 M&L wiring for circuit/ Sub main wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ recessed required. 2x4 Sqmm + 1x4 Sqmm earth wire. Note: Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length. 135 S&F XLPE insulated, armoured, 1100 volts grade, heavy duty cable of size 70 Sqmm nominal cross section, 3.5 core, aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing. complete all as specified 136 M&L for riddle sand cushioning (dry) in trenches for protection of UG cable(below, above and around the UG cable laid of 23 cm spread thickness i.e 8 cm in depth before laying the cable and 15 cm in depth after laying the cable) and consolidated(punned) upto 180 mm thickness complete all as specified and directed by Engr-in-charge.Note:- Punned thickness only shall be measured for the purpose of payment. 137 S&F Cover to underground cable with one layer of bricks using sub class B bricks (old size) laid flat across the cable comple e all as specified. (Excavation and earth work measured separately). 138 Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified. 139 S&F Mild steel galvanised pipe, light grade. 80 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specifier 140 Cutting hole making good the disturbed surface, grouting nuts & bolts for fixing of exhaust fans, complete all as specified. 141 Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth hot less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative leyers of charcoal dust and comman salt, earth lead Gl wire of 4mm dia (8) SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of Gl earth wire is connected to main switch board and protected by light grade Gl pipe of 15 mm bore. Provision of 20mm bore light grade Gl pipe for watering including Gl funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces Excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No-3 of SSR Part-1 (2009).
