Tender For Repairing Back Side Vip Room Of Auditorium At Dr. Ram Manohar Lohiya Parikalp Bhawan, Telibagh. - Scraping Old White Or Colour Wash Including Disposal Of Refuse As Directed By The Engineer-In-Charge With In A Distance Of 60 Meters 2 Providing, lucknow-Uttar Pradesh

Tender For Repairing Back Side Vip Room Of Auditorium At Dr. Ram Manohar Lohiya Parikalp Bhawan, Telibagh. - Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meters 2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3 Finishing wall with Premium acrylic smooth exterior paint with silicone additives of required shade old work (Two or more coats applied @ 1:43 Ltr/10 sqm) over existing cement paint surface (apex Ultima , weather coat att guard) 4 3 mm thick high pressure laminate ( decorative type) with moulded/extruded beading of appropriate design shape and size as per manufacturer Specifications ( to secure the panel insert tightin place within the style and rails of shutter) matching the colour and shade of shutter frame. non decorative type. 5 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. 6 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore 7 Providing and fixing C.P. brass angle valve for basin mixer and geyserpoint of approved quality conforming to IS:8931. 8 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 9 Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete 10 Supply and fixing of recess mounting round 15 to 18 watt LED Down lighter having pewder coated die cast aluminium housing with heat sink diffuser/ reflector and driver set complete in all respect. 11 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 12 The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 13 Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 14 On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 15 On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) 16 Providing and Fixing of Single Roller blind –utilise one layer of fabricComplete in all respect as per direction of Engineer-in-Charge

INR 590 /-

INR 3280.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB