Spl Repair To Bldg No P 04 And P 05 At Bhagat Line Provn Of 13 X Chemical Earthing For Nfs Installation At Palampur Mil Stn; 1 Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete etc all as specified and directed by Engineer in Charge 70.00 Each 2 Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm each complete etc all as specified and directed by Engineer in Charge. 38.00 Each 3 Taking down Chowkhats or frames not exc. 1.5 sq. m each complete etc all as specified and directed 4.00 Each 4 Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each complete etc all as specified and directed 4.00 Each 5 Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in other opening, complete all as spfd and directed 8.00 Per Leaf 6 S & F factory made single extruded WPC ( Wood Polymer composite) solid door/ window/ Ceosetory window & other frames/chowkhat of size 65x100 mm comprising of virgin pvc polymer of K value 58-60 ( Suspention Grade) calcium carbonate and natural bibres ( Wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed SS screw having minimum frame density of 750 Kg/Cum, Screw withdrawal streanth of 200 N ( face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire, retardand and fixed in position with MS hold fast/lungs/ss dash fasterners of required dia and length complete as per direction of Engr-in-Charge 96.00 RM 7 S&F factory made single extruded WPC ( Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 ( suspention Grade), calcium carbonate and natural fibres ( wood power/ rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strenth of 1800 N ( face) & 900 N ( Edge), minimum compressive strenth 50 n/mm2 modulus of elasticity 850 n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, all as per direction of Engr-in-Charge 36.00 Sqm 8 S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. 38.40 RM 9 S & F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. 96.00 RM 10 M&L Plain cement concrete, M-15 (Nominal mix), type B-0 (Using 12.5mm graded stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and as directed. 0.67 CUM 11 S&F 2nd class HW (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick fitted to chowkats, complete all as spfd and directed. 36.00 SQM 12 S&F 2nd class HW (Sal / Hollock) factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass or gauge, etc. (w/o sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutters S&F to chowkats, complete all as spfd and directed. 14.40 SQM 13 S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed by Engineer in Charge. 79.80 RM 14 S&F factory made solid panel PVC door shutter 35 mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specifed and directed by Engineer in Charge. 25.20 Sqm 15 S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. complete all as specified and as directed. 8.64 SQM 16 S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed by Engineer in Charge. 72.00 Each 17 S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer in Charge. 100.00 Each 18 S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer in Charge. 100.00 Each 19 S&F 250 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer in Charge. 20.00 Each 20 S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer in Charge. 8.00 Each 21 M& L Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed by Engineer in Charge. 3.00 Cum 22 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 Incl demolition complete all as specified and as directed by Engr-in-charge. 3.00 Cum 23 M&L Brick work with Subclass B bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete etc all as specified and directed by Engineer in Charge. 12.00 Sqm 24 M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:4) complete etc all as specified and directed by Engineer in Charge. 12.50 Sqm 25 M& L Taking down cement plaster/tiles of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete etc all as specified and directed by Engineer in Charge. 791.27 Sqm 26 M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth (without using extra cement on internal wall surface, complete etc all as specified and directed by Engineer in Charge. 170.00 Sqm 27 M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:4 finished the surface even and smooth (without using extra cement on external wall surface,complete etc all as specified and directed by Engineer in Charge. 355.50 Sqm 28 M& L Rendering 5mm thick plaster on fair faces of concrete surfaces as in facia or ceiling in cement mortar 1:3 finished even and smooth without using extra cement, complete etc all as specified and directed by Engineer in Charge. 70.40 Sqm 29 Material & Labour for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new/old plaster surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed by Engineer-in-Charge. 395.00 Sqm 30 M & L Peparation of plastered surfaces of walls, priming plastered and other surfaces with alkali resistent priming paint and applying two coats of cement base paint ,complete all as specified and directed. 25.00 SQM 31 M&L for preparation of new plastered surfaces of ceiling and applying three coats of white complete etc all as specified and directed by Engineer in Charge. 70.40 Sqm 32 M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed. 209.60 Sqm 33 M & L for Peparation of newly plastered surfaces of walls and applying two coats of white wash ,complete all as specified and directed. 30.00 SQM 34 M & L Peparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint ,complete all as specified and directed. 120.00 SQM 35 M& L Preparing of new plastered wall surface and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification applying over plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smoothcomplete etc all as specified and directed by Engineer in Charge 170.00 Sqm 36 M& L Preparing of old plastered wall surface and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.complete all as specified 989.00 Sqm 37 M&L for preparation of new steel surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete etc all as specified and directed by Engineer in Charge 15.00 Sqm 38 M&L for preparation of old steel surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint complete etc all as specified and directed by Engineer in Charge 86.21 Sqm 39 M&L for preparation of old wood & wood based surfaces exc 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete etc all as specified and directed by Engineer in Charge 30.00 Sqm 40 M&L for preparation of New wood & wood based surfaces exc 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete etc all as specified and directed by Engineer in Charge 86.40 Sqm 41 S&F Mild TMTsteel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 100.00 Kg 42 Demolition of reinforcement cement concrete of any description complete all as specified and directed. 1.00 Cum 43 M&L RCC 1:2:4 type B-1 using 20mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Incl demolition complete etc all as specified and directed by Engineer in Charge 1.00 Cum 44 M& L Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat or curved complete etc all as specified and directed by Engineer in Charge 3.00 Sqm 45 S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as spd,Incl dismantling complete etc all as specified and directed by Engineer in Charge 324.00 Sqm 46 S&F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as spd, Incl dismantling complete all as spd. 32.00 Sqm 47 Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets of any thickness, including cover fillets complete all as specified and directed. 148.69 SQM 48 S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main T runner size 24x38mm and 0.30mm thick,1200mm long cross T of size 24 x 25mm and 0.30mm thick, 600mm secondary cross T of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main T runners are then suspended from ceiling using GI sloted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised buttrtfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main T and not more than 150mm from spliced joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross T is interlocked between the main T at 600mm center to center to form a grid of 1200x600mm and then secondary cross T of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed., complete all as specified and directed by Engineer-in-Charge. 148.69 Sqm 49 M&L for Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete etc all as specified and directed by Engineer in Charge 22.83 Cum 50 M&L for 50 mm thick PCC type C-2 1:3:6 (using 40mm graded crushed stone aggregates) as in plinth protection etc and finished even without using extra cement, complete etc all as specified and directed by Engineer in Charge 103.60 Sqm 51 M&L for 25 mm thick PCC 1:2:4, type B-O (using 12.5 mm graded crused stone aggregate) as in floors finished rough to receive floor finishes, complete all as specified. 353.00 Sqm 52 M&L for (non skid), joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed. 75.00 Sqm 53 M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 278.00 Sqm 54 M & L coloured tiles of size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed 40.00 SQM 55 M&L for Glazed ceramic coloured tiles 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, Incl dismantling complete all as specified. 290.00 Sqm 56 S& F Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. 15.00 Sqm 57 M&L for polished kota stone 15mm thick as in vertical surfaces such as riser of steps, skirting etc set and jointed grey cement with pigment over screed plaster 10mm thick in CM 1:4 complete etc all as specified and directed by Engineer in Charge 10.00 Sqm 58 S& F 20mm thick Granite (of any type) work (table rubbed and polished and moulding of outer edges) for wall lining (veneering to wall) with and including 10 mm thick in cement mortar (1:3) and pointed in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite, complete all as specified. 20.00 Sqm 59 M&L PCC type C-2 1:4:8 (40mm graded aggregate) cement concrete in foundation, filling and mass concrete complete etc all as specified and directed by Engineer in Charge 1.20 Cum 60 S&F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed by Engineer in Charge. 750.00 Kg 61 S&F for Rotational moulded polythelene water storage tanks 1000 ltrs capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I,Incl 20mm bore ball brass valve & dismantling complete etc all as specified and directed by Engineer in Charge 4.00 Each 62 S&F for Rotational moulded polythelene water storage tanks 500 ltrs capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I,Incl 20mm bore ball brass valve &dismantling complete etc all as specified and directed by Engineer in Charge 4.00 Each 63 S&F in repair 20mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. 8.00 Each 64 S&F in repair vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, P or S trap, with fixing bolts & PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed. 12.00 Each 65 S&F Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) S trap, provn of lime concrete and jointing to flush pipe complete all as specified and directed. 4.00 Each 66 S&F in repair 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed. 8.00 Each 67 S&F in repair Vitreous china, wash hand basin with pedastral (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified . 4.00 Each 68 S&F in repair oval (colour as directed) counter wash basin of size 560 x 470 x205mm incl CP coupling and waste pipe complete all as specified and directed by Engineer-in-Charge. 6.00 Each 69 S&F for Low density polyethylene pipe of 32/40mm bore fixed to coupling of length as per site requirement etc complete all as specified and directed 10.00 RM 70 S&F 25 mm Stainless Steel drapery rod with a pair of stainless stell coated M S clamp to hold drapery rod and decorative attachment at one or both ends of drapery rod fixed in opening door/window (each opening n exc 1.50m contained with a pair of clamps and a pair of side ornament attachments) complete all as specified and as directed. 60.00 RM 71 S&F for bib cock long body CP for 15mm bore fancy type, cast copper alloy, screwed down, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and directed. 20.00 Each 72 S&F for CP Stop cock/ Angle valve (one way or two way as per requirement of site) 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, 15mm bore fancy type and fixed in repairs complete all as specified and directed. 40.00 Each 73 S&F for CP Stop cock/ Angle valve (one way or two way as per requirement of site) 15 mm cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions, 15mm bore fancy type with long shank and cup and fixed in repairs (Concealed type) complete all as specified and directed. 8.00 Each 74 S&F as in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed 4.00 Each 75 S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (fixed in repair) complete all as specified and as directed by Engr-in-charge. 4.00 Each 76 S & F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to WHB and Sink or concealed type wall mixer fixed in any position as per site requirement complete all as specified and directed 20.00 Each 77 S&F for PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified. 15.00 Each 78 S&F in repairs 15mm bore Brass chromium plated shower rose 125mm size, complete all as specified. 8.00 Each 79 M&L Dismantling of 75mm bore cast iron or reinforced concrete drain pipes,PVC pipe jointed in cement mortar, solvent etc and taking out of trenches, if required complete all as specified and directed 27.00 Rm 80 M&L Dismantling of 100/110mmbore cast iron or reinforced concrete drain pipes,PVC pipe jointed in cement mortar, solvent etc and taking out of trenches, if required complete all as specified and directed 33.00 Rm 81 S&F in PVC soil waste pipe 110 mm bore single socketed, in any length with rubber rings joints , fixed in wall with clamps etc all as specified and as directed by Engineer-in-Charge. 20.00 RM 82 S&F PVC soil waste pipe 110mm bore single socketed, in any length with rubber ring joints, as in floor and trenches all as specified and directed. 13.00 RM 83 S&F PVC soil waste pipe 75mm bore single socketed, in any length with rubber ring joints, as in floor and trenches all as specified and directed. 15.00 RM 84 S&F PVC Soil waste pipe 75mm bore single socketed, in any length with cement joint joints, fixed in wall including fixing 5mm flat iron and 16 mm dia iron stayclamps etc all as specified and directed. 12.00 RM 85 S&F PVC diminishing pieces door taper bends any radius 75mm bore with access door complete all as specified and directed. 6.00 Each 86 S&F PVC diminishing pieces or taper bends any radius 110mm bore with access door complete all as specified and directed. 6.00 Each 87 S&F PVC bends floor trap with grating including jointing with solvent 75mm bore complete all as specified and directed. 12.00 Each 88 S&F PVC branch pieces double Tee equal or unequal 110mm bore with access door complete all as specified and directed. 4.00 Each 89 S&F PVC branch pieces double Tee equal or unequal 75 mm bore with access door complete all as specified and directed. 4.00 Each 90 S&F PVC vent cowl 75mm complete all as specified and directed. 4.00 Each 91 S&F Stainless steel plate rack of size 600mmx750 mm of selected quality all as specified and directed. 4.00 Nos 92 S&F for 900mm x 600mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. 8.00 Each 93 S&F in repairs SS Soap dish, , approximate size 160x 160x90mm including fixing complete all as specified and directed. 12.00 Each 94 S&F for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified. 8.00 Each 95 S&F for steel tubes, 15 mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseliing or groove cutting of stone masonry for concealed type tubing incl all necessary means),Incl dismantling complete all as specifed 30.00 RM 96 Fixing Only steel tubes, 15 mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, (including chiseliing or groove cutting of stone masonry for concealed type tubing incl all necessary means) but except GI tubing, Incl dismantling complete all as specified. 10.00 RM 97 S&F steel tubes, 20 mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, (including chiseliing or groove cutting of stone masonry for concealed type tubing incl all necessary means)Incl dismantling complete all as specifed 10.00 RM 98 Fixing only steel tubes, 20 mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseliing or groove cutting of stone masonry for concealed type tubing incl all necessary means) but except GI tubing, Incl dismantling complete all as specified. 20.00 RM 99 S&F steel tubes, 25 mm bore, galvanised, medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, (including chiseliing or groove cutting of stone masonry for concealed type tubing incl all necessary means)Incl dismantling complete all as specifed 10.00 RM 100 S&F for Aluminium anodised powder coated chowkhats frames for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc, complete all as specified. 160.00 Kg 101 S&F for 4.00mm thick ordinary quality sheet glass pin headed/plain fixed to aluminium frame of partition etc fixed with rubber gasket & aluminium powder coated snap beading etc, complete all as specified. 38.00 Sqm 102 S&F Powder coated Anodised aluminium door shutters ( power coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed by Engineer in Charge. 16.00 Sqm 103 S&F powder coated anodised aluminium window and ventilator shutters, of any type (Two/three track) Sliding type aluminium powder coating 50 micron and, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle (1 no.) locking & sliding system complete all as specified and directed by Engineer in Charge. 47.39 Sqm 104 S&F stainless steel wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 35.22 Sqm 105 S&F 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, complete all as specified and directed by Engineer-in-Charge. 50.00 Sqm 106 S&F Auto closing hinges 35 mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed by Engineer-in-Charge. 12.00 Each 107 S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed by Engineer-in-Charge. 32.00 Each 108 S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed by Engineer-in-Charge. 40.00 Each 109 M&L magnetic catcher of suitable size as spfd and directed 20.00 Each 110 S&F Chromium plated stainless steel wire basket ( storage basket) pull out type for large utensils size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed by Engineer-in-Charge. 4.00 Each 111 S&F Chromium plated stainless steel wire basket ( cup and saucer basket) pull out type for large utensils size 380 x 500 x 100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed by Engineer-in-Charge. 4.00 Each 112 S&F Chromium plated stainless steel wire basket ( Plate basket) pull out type for large utensils size 380 x 500 x 100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed by Engineer-in-Charge. 4.00 Each 113 S&F Chromium plated stainless steel wire basket ( Cutlery basket) pull out type for large utensils size 380 x 500 x 100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. 4.00 Each 114 S&F for 75 mm hasp and staple, safty type, aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws as specified all as directed by Engineer-In Charge. 12.00 Each 115 S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm as specified all as directed by Engineer-In Charge. 10.00 RM 116 M&L 40mm thick PCC type B-0,1:2:4 (usning 12.5mm thick crushed stone aggregate) IN SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS,& roof padding ETC.including chicken wire mess(12x12mm) of galvanised steel wire 0.91mm dia (sandwich) complete all as specified & directed 50.00 Sqm 117 S&F High performance two component brushable elastomeric polyurea waterproofing coating on Roof top/ sunken floor of WC & floor trap cold applied brush applied ultraseal BA or approved equivalent, liquid membrane with white in color with an elongation of 500% and tensile strength of 5 N/mm2 @DFT 1mm as per ASTM D 2370, 73 % Solid Content, shore A Hardness of min. 70. The system includes final base preparation, epoxy primer application@ 200-250 gms/Sqmt depending upon the surface porosity and applying Home Shield Ultraseal BA or approved equivalent in two coats at 1.5 kg per Sqm providing 1.2mm DFT etc, complete as per Manufacturer specifications. 50.00 Sqm 118 M&L 15mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base in sunken portion of WC & floor trap , mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.(Note:- WPC and polymeric memebrane shall be measured and paid separately) 50.00 Sqm 119 Supply only liquid water proofing compound complete all as specified and directed by Engineer in Charge. 2.36 Ltrs 120 M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed. 1.60 Cum 121 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed by Engr-in-charge. 80.00 RM 122 S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 450.00 Kg 123 M&L Taking down old steel doors/shutter carry necessary repair work to made it functional and refixing in same opening after complete maintenance all as specified and directed 4.00 Per Leaf 124 Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 350.00 PerPoint 125 Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. 10.00 Each 126 Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. 160.00 RM 127 M&L for replacement point wiring with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing N capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including Modular GI sheet Metal flush boxes of anyway (as per site requirement) for mounting switches, sockets, regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. 214.00 PerPoint 128 Description all as per serial item No 127 here-in-before but one 5pin, 6 Amp socket outlet on same board complete all as specified and directed. 40.00 PerPoint 129 Description all as per serial item No 127 here-in-before but one 5pin, 6 Amp socket outlet independent complete all as specified and directed. 44.00 PerPoint 130 Description all as per serial item No 127 here-in-before but for one 5 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm for phase and earth wire of size complete all as specified and directed. 48.00 PerPoint 131 All as per the description of serial item no 127 above controlled by two 2-way switches, with cables 1.5sqmm size all as specified and directed. 4.00 PerPoint 132 S&F Modular Switch two way 6 Amp, one module 240 volts ISI marked complete all as specified and directed. 8.00 Each 133 S&F bell, AC 230 Volts, single pole complete all as specified and directed. 8.00 Each 134 S&F Modular bell push 6A 1 module 240 volts ISI marked complete all as specified and directed. 8.00 Each 135 S&F Modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specified and directed. 290.00 Each 136 S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 84.00 Each 137 S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 40.00 Each 138 S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. 40.00 Each 139 S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. 28.00 Each 140 S&F Modular white cover plate 8M complete all as specified and directed. 30.00 Each 141 S&F Modular white cover plate 6M complete all as specified and directed. 24.00 Each 142 S&F Modular white cover plate 3M complete all as specified and directed. 84.00 Each 143 S&F Modular white cover plate 1M complete all as specified and directed. 8.00 Each 144 S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed. 8.00 Each 145 S&F ceiling rose, 3 terminal surface type complete all as specified and directed. 160.00 Each 146 S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. 26.00 Each 147 S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. 82.00 Each 148 S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. 12.00 Each 149 Supply and Fix LED Bulk Head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed. Crompton/havells/bajaj/orient or as approved by GE 14.00 Each 150 S&F street light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 40 x 5 iron strip and nut bolts and washers, complete all as specified. 8.00 Each 151 Supply and fixing LED street light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. 8.00 Each 152 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 10.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding. 160.00 RM 153 S&F factory made CRCA sheet powder coated double door panel board 2mm thick, of size 100X100X20 cm, with Aluminium bus bar, wall mounted type partially grouted in wall with locking arrangement, handle and making good disturbed surface as well as matching with existing whitewash color/surface and including provn of following and connection all as specified and directed :-a) MCCB 125A, 4Pole 415 Volts, C series-01Nos (Incoming)b) MCB SP, 40A, 230 Volts-03 Nos (Outgoing for each qtr and 1 common stair cae light point)c) MCB SP, 63A, 230 Volts-02 Nos (Outgoing for each qtr)c) Fixing only existing old energy meter including connection complete all as specified and directed. 2.00 Each 154 M&L distribution board sheet steel powder coated for MCB with rated bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.Note:- Distribution board and MCBs should be same make. 8.00 Each 155 S &F in replacement of SPN 40 Amp rating 240V, 10KA C curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 4.00 Each 156 S &F in replacement of SPN 63 Amp rating 240V, 10KA C curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 4.00 Each 157 S&F in replacement 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 54.00 Each 158 S&F in replacement 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 4.00 Each 159 Supply and Fix fancy lights with led bulb holder plastic housing with clear prismatic diffuser, with IP 42, complete all as specified and directed. Note: The item must be brought as per sample approved by GE 20.00 Each 160 Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrode and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified. 4.00 Each Job 161 Disconnecting/ Taking down Ceiling Fan/ Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade oiling and greasing of bearing including refixing and making the conection and testing complete all as specified and directed. 44.00 Each 162 M&L cutting and taking out old burnout winding of any sweep ceiling fan/Exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of Engineer- in- charge. 20.00 Each 163 Disconnecting water heater and taking in safe custody/ refixing the same including fastner and making the conection and testing complete all as specified. 8.00 Each 164 Disconnecting electronic meters temper proof LCD display and taking in safe custody and refixing the same with caliberation and cleaning and making the conection and testing complete all as specified and directed. 4.00 Each 165 Supplying laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volta grade with stranded aluminium conductor of size 25 Sqmm , 3.5 core flat cable complete all as specified. 110.00 RM 166 Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed. 21.60 Cum 167 Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed. 12.45 Cum 168 Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. 9.15 Cum 169 M&L for sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. 6.48 Cum 170 M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed. 0.70 Per 1000 Nos 171 Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed. 8.00 RM 172 Supply and fix encapsulated compound/chemical gel based maintenance free pipe in pipe technology chemical earthing with copper earthing electrode rod 3 meter long 17.2mm dia 250 microns of electrolyte grade copper with UL marking including clamp for connection, earth enhancement material (backfill material) make LOHM and it is highly electrically conductive of 0.2 to 1 ohm. Lot will not be dependent on soil moisture and will ensure consistent ohmic value throughout the life span of earthing pit. The earth pit should be provided with FRP polyplastic earth-pit chamber, heavy duty, whether-proof, environmental free for protection and safe guard of terminals in areas where soil condition is bad good earth is to be arranged to fill the excavated pits by mixing the same with BFC 2 bags (as per soil condition). The inner pipe should be extended with terminals for connectivity. The job includes digging the pits and refilling the same installation work of MFE with chamber complete all as specified and directed.Note: The quoted rate shall be inclusive of filling the earth pit with chemical and copper suitable and testing of earthing and exclusive of FRP earthing pit cover complete will be measured and paid separately. 13.00 Each Set 173 S&F copper earth continuty conductor fixed to wall or recessed or burried in ground or drawn in conduit/pipe fixed to eqpt point or any other indicated situation for loop earthing with porcelain insulator etc as required of size 20 x 3mm copper strip complete all as specified and directed. 325.00 RM 174 Supply and fixing GI pipe medium grade of size 50mm bore for erection of lightening conductor complete as required and directed by Engineer-in-Charge. 40.00 RM 175 S&F earth pit 125mm dia FRP polyplastic earth pit cover of top size 200x200mm bottom size 300x300mm with height of 150mm with lockable lid, earth pit cover shall made of poly plastic tested at 7.5 ton load for closing of earth pits complete all as specified and directed. 13.00 Each 176 S&F HDPE PVC pipe of size 150mm dia PN 10 for chemical earthing filling compound complete as required and directed by Engineer-in-Charge. 40.00 RM 177 M&L providing cement concrete in surface of ground and making good to disturbed suraface as it was existing by using the PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) on cutting areas/disturbed surfaces complete all as specified and directed. 0.60 Cum
